Recent content by Bekir57

  1. Bekir57

    nintendo switch no response

    hello no response on nintendo switch When I unplug the Nand the USB charging draws power, when I plug it into the computer it shows up as APX. green light blinks 1 time when i plug it into the dock no response other than that (The capacitors I marked in red are short circuited.)
  2. Bekir57

    Hacking Hardware Picofly - a HWFLY switch modchip

    hello guys, there is a problem, after breaking the capacitor at 3.3 v, I got a blue screen error, I hope it's from the capacitor, because at the same time, it short-circuited the 2 cables I connected the mosfet, so I hope tegra x1 is not broken.
  3. Bekir57

    Hacking Hardware Picofly - a HWFLY switch modchip

    thanks but now my switch gave a blue screen error I hope it will be fixed when I replace the capacitor 1677964754 because I want to support development and improve myself in this regard.
  4. Bekir57

    Hacking Hardware Picofly - a HWFLY switch modchip

    anyway what can i do for 3.3v capacitor i don't know the values
  5. Bekir57

    Hacking Hardware Picofly - a HWFLY switch modchip

    I thought about buying a pico zero, but it's expensive for my country's currency. I buy a $5 pico zero for 150 Turkish liras.
  6. Bekir57

    Hacking Hardware Picofly - a HWFLY switch modchip

    but there is no twenty ninth pin in pico where do i connect the data0 pin
  7. Bekir57

    Hacking Hardware Picofly - a HWFLY switch modchip

    hello, I have bad news for you again. While installing picofly on my own switch, I removed the 3.3v component and it became unusable what can I do about this issue and how can I use the raspberry pi pico? There is no gpio 29 pin I'm sorry for my bad english
  8. Bekir57

    Hacking Hardware Picofly - a HWFLY switch modchip

  9. Bekir57

    Hacking Hardware Picofly - a HWFLY switch modchip

    Unfortunately, I can't use it, the only g pin is broken and does not hold solder. I have 1 more question, is the voltage value and amperage matching enough, so I should buy a 30v 8.8a mosfet and can you recommend me a sample mosfet?
  10. Bekir57

    Hacking Hardware Picofly - a HWFLY switch modchip

    Friends, the pins of the irs8342 I bought were broken, I'm thinking of buying a new one, but before I buy it, I wonder if I could use a larger mosfet, I would be happy if you suggest a model.
  11. Bekir57

    Hacking Hardware Picofly - a HWFLY switch modchip

    hello i have a mariko and i want to chip it and i don't have a hwfly flex cable i can do it with irs8342 right?
See more