Recent content by antop095

  1. A

    PS5 EDM 020 TPM Issue

    Ho, have you solved this error? I have the same error with a ps5
  2. A

    PS5 UART commands

    I have a ps5 with the same error, edm-010 board. Have you fixed it?
  3. A

    PS5 UART commands

    replaced the ram and now works 1707253335 changed the dialog DA9081 and the 1,2 and 0,8 are present. now the errlog is this: errlog 3:DE OK 00000000 808F0002 FFFFFFFF FFFF0005 00000100 2157 0016 FFFF 1695:F3 errlog 4:DF errlog 4:DF OK 00000000 80800014 FFFFFFFF FFFF0005 00000100 2013 0016 2440...
  4. A

    PS5 UART commands

    hi, i have a ps5 1 sec blod with this errlog: OK 00000000:3A $$ [MANU] UART CMD READY:36 ERRLOG 0:1B ERRLOG 0:1B NG F0000006:51 errlog 0:DB errlog 0:DB OK 00000000 80801120 001D6232 FFFF0005 10000100 2013 001E 1892 15F9:24 errlog 1:DC errlog 1:DC OK 00000000 80801120 001D6228 FFFF0005 10000100...
  5. A

    PS5 UART commands

    The skhynix was shorted, replaced it, but the 1,2v are still missing but not shirted anymore. In diode mode i have 0.230 ohm at the dialog ic. 0.8v is now present. The error log now gives the error 80871001 DDR4 error (power failure/short circuit)
  6. A

    PS5 UART commands

    all standby voltages are present, when turning on the 0.8 e 1.2 are missing. The 1.2 v test point in shorted. I removed the dialog but the short remains
  7. A

    PS5 UART commands

    Thanks. Ready with another one, with this error log, but i dont understand what can be the cause of the problem OK 00000000:3A $$ [MANU] UART CMD READY:36 errlog 0:DB errlog 0:DB OK 00000000 80918200 FFFFFFFF FFFF00F6 00000000 2186 0000 FFFF FFFF:3B errlog 1:DC errlog 1:DC OK 00000000 80870003...
  8. A

    PS5 UART commands

    replaced the third ram ic and it's working
  9. A

    PS5 UART commands

    Hi, i hve another ps5 with error 80801104, ram 3 defect, anyone knows which one is the third ram ic?
  10. A

    PS5 UART commands

    with the okd rams, it gives the same error, unexpeted power failure
  11. A

    PS5 UART commands

    Before changing the ram, it gave me error 80801109 and 80801101, do you siggest changing with another southbridge or reballing it?
  12. A

    PS5 UART commands

    The southbridge was changed, after that the error was related to ram ic 1 and 4 has been changed, and the errorlog i sent is the actual behavior
  13. A

    PS5 UART commands

    HI, i've this poard edm.020, and these are the errors, someone know what could be the problem other than unexpeted power failure? OK 00000000:3A $$ [MANU] UART CMD READY:36 errlog 0:DB errlog 0:DB OK 00000000 E3121F70 FFFFFFFF FFFF0000 00000000 2004 0000 0000 0000:81 errlog 1:DC errlog 1:DC OK...
See more