alright, I'll go search for the best option available for me nowYep.
alright, I'll go search for the best option available for me nowYep.
same herei have new 3dsxl 11.2-35u
already installed the oothax new3ds11.1-34u using hacked 3ds
when i load the save the press 'A' to the bed
getting errors and force to close the game and restart system...
there are times the hax work maybe 2 out of 50 tries?
is there a trick on how use the hax or timing on when will i press 'A'?
sorry for noob question and bad english
thanks in advance
Always clear your OoT3D save file (hold A+B+X+Y when booting the game) every time it doesn't work.hey, I'm trying to use my o3ds which has cfw already set up on it to get oothax to work on a n3ds 11.0.0.33. I went and got 11.0.33 payload from the homebrew site and renamed it to payload.bin
Why are you doing this? There should only be one save named save00.bin. Try one save from one card ID (e.g. 45fe) first, and then try to try one from the other card ID (e.g. c2fe) if that doesn't work. Make sure you're injecting saves from the 'saveimages' folder, not 'saveimages_powersaves'.
Minimum Hardware Needed:
DSlite/phat + DS flashcard.
1. Download DSsavemanager http://3dbrew.org/wiki/DSaveManager
2. Download the save files here https://github.com/yellows8/oot3dha...t3dhax_rawsaveimages_haxpayloads_11-10-15.zip
3. Find your 3ds's save in the raw 'saveimages' folder (refer to the oot3dhax repo readme). If you don't know what card remaster type you have, just grab both.
4. Place the 2 raw .sav files and DSM.nds in your DS flash microSD root.
5. This is the tricky part. You will either need to saw off the nub of the corner of your zelda cart or open it, take out the board, and place it in a ds card shell.
6. Now boot up DSM.nds and select "Restore save(FAT)" Find your save and select it.
7. Replace the DS flashcard with OOT and Press A to write the save. Done! Enjoy your OOT3Dhax. (if the 1st save didn't work, try the second)
I have tested this method and it works.
It should work with an R4iSDHC, but DSsavemanager only works with an original DS or a DSlite.Is it possible to do that on the o3ds xl with r4isdhc dual core?
It should work with an R4iSDHC, but DSsavemanager only works with an original DS or a DSlite.
You cannot install oot3dhax from a 3DS on 11.0 or higher. You'll need to find either a Powersaves device or a 3DS below 11.0 (or with CFW).I have followed the steps from start to finish I have a N3DS xl on 11.2. I've used smash hax to get to the homebrew menu however when I try to launch the sploit oot3ds hax installer it just hangs on a yellow screen please help i am so exhausted
You cannot install oot3dhax from a 3DS on 11.0 or higher. You'll need to find either a Powersaves device or a 3DS below 11.0 (or with CFW).
If you're using Luma, you should be able to install it as normal even on 11.0, as I believe Luma bypasses PASLR.I am on EmuNand 11.0 on my CFW N3DS. How do I get oot3dhax to work? Do I need a lower FW on emunand? I still have a 9.2 and 10.7 Emunand backup.
If you're using Luma, you should be able to install it as normal even on 11.0, as I believe Luma bypasses PASLR.
Once installed, it should work on a stock 11.0 3DS.and will the installed hack load on an untouched 11.0 machine? or is it prevented through that ASLR?
same here
for me it does not download the payload
unfortunately I get this when trying the method in the tutorial:
How did you do it lincruste?
UPDATE:
oot3dhax works fine on newest 11.2.0-35E firmware.
I am wondering: do I have to reinstall the exploit modified to 11.0 when I use a different 3DS with version 11.0? or is it the same exploit on these firmwares?