initial release still reports region as EUR, but I assume it goes after system setting/associated eshop account.
system was bought on release in Japan.
system was bought on release in Japan.
initial release still reports region as EUR, but I assume it goes after system setting/associated eshop account.
system was bought on release in Japan.
It's exactly what it says it is, it can be turned off in settings I believe.Console information upload?
I'm unable to find it. Are you sure it's not "Share Error information"?Region is yet to be properly confirmed. --> (Displays region (needs more testing).)
But considering you're saying that, it might just be associated with what you set up your switch as. What does your region say in System Settings-> System?
It's exactly what it says it is, it can be turned off in settings I believe.
Don't remember where exactly but you can try enabling/disabling it and see if it changes in SwitchIdent.I'm unable to find it. Are you sure it's not "Share Error information"?
No change but hard to know if the console is really sending information or not with settings off. Unlike Spotpass on the 3DS, you can manually turn it on and off. The Switch... i dont know how to disable/enable it. Unless you can direct me where in the settingsDon't remember where exactly but you can try enabling/disabling it and see if it changes in SwitchIdent.
No change but hard to know if the console is really sending information or not with settings off. Unlike Spotpass on the 3DS, you can manually turn it on and off. The Switch... i dont know how to disable/enable it. Unless you can direct me where in the settings
The "state" is _handheld_ and the cpu is 1020mhz/gpu 307mhz. Does it change if the state is _docked_?
NoWill this let me know if I have a TN or IPS screen?
Joel16 - is it possible to add features like view fuse count or is this only visible from boot loader ?
I believe it's only possible from the bootloader at the moment but I may be wrong.
does that means the battery percentage will keep going up while playing game?Displays if ample power is supplied.
Doesn't work on 10.X.X?will this app gets updated or there is there another app like that?
Doesn't work on 10.X.X?
It needs to be recompiled with the latest changes. I decided to stop updating this because it seemed people didn't really care too much about it. There's also the fact that heakte exists and it shows a lot of information about the device already.input not working, so I can't navigate. non gui version got less information.
I love 3DSident and hope there's a homebrew that checks IPS or TN for Switch too!It needs to be recompiled with the latest changes. I decided to stop updating this because it seemed people didn't really care too much about it. There's also the fact that heakte exists and it shows a lot of information about the device already.