SSD Clone from LCD to OLED

[Blauhasenpopo]

So....get my OLED Deck yesterday and cloned my SSD from my LCD 1TB to the SSD 1TB from the OLED one.

Did the Trick with:

sudo dd if=/dev/nvme0n1 of=/dev/sda conv=sync status=progress

This morning i put the OLED SSD back in the OLED Deck aaand get Stuck on the Orange Valve Logo.

The output in the console was (at the far end)......: "you are in emergency mode. after logging in, type “journalctl -xb” to view system logs, “systemctl reboot” to reboot, “systemctl default” or “exit” to boot into default mode. cannot open access to console, the root account is locked. see sulogin(8) man page for more details."

Someone a guess ?

THX in advance

 

[Xzi]

You had previously set a super user password in console on the LCD Deck, correct?

 

[Blauhasenpopo]

Yes, did set up a password

 

[Xzi]

Yes, did set up a password

Alright, that was my best guess for what could be causing an access violation, but I'm mostly a Linux noob. Might be some conflict on the firmware/hardware level with the OLED Deck that's causing it too.

 

[Blauhasenpopo]

I get a hint, that's pointing me in the etc/fstab direction. (But i'm also maybe not a noob, but also not a Pro in Linux)

So maybe editing the etc/fstab would do the Trick, but.....how