So I upgraded to a 256 samsung evo card but I've noticed every time I use reboot to payload (set to hekate and via HOS restart) and boot hekate (even if it's auto boot) there's a long 2-3 minute hang on the boot logo before anything happens.
Right now my autoboot is set to boot fusse_secondary
Whereas if I push fusse-primary.bin, sx or like even lakka, the switch boots straight into it. I know my card isn't a lemon because it hits it's advertised speeds in CrystalDiskMark and it's space is true according to sdtester. I currently have a 1 for 1 copy of my 128 sd card on it, (except for a few files) and if I reboot to payload using my 128gb sd card it's fast and instant.
Here's my hekate bootloader setup. Anyone know what the issue is? I know there's been talk about U3 cards acting up, and I'm not sure if this is one of those things.
Code:
[config]
autoboot=1
autoboot_list=0
bootwait=1
verification=1
backlight=76
autohosoff=0
autonogc=1
{-- Custom Firmware --}
[CFW]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
atmosphere=1
logopath=bootloader/bootlogo.bmp
icon=bootloader/res/icon_payload.bmp
{}
[SX OS]
payload=bootloader/payloads/sx.bin
icon=bootloader/res/icon_sx.bmp
{}
[Lakka]
payload=lakka/boot/coreboot.rom
logopath=lakka/boot/splash.bmp
icon=bootloader/res/icon_lakka.bmp
{}
{---- Miscellaneous ---}
[Stock]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
stock=1
icon=bootloader/res/icon_switch.bmp
{}