D
Deleted User
Guest
I mean, how can i turn off the switch. I used to be able to do it with previous version of hekateIt is on, it's just in RCM mode. Push a payload and you'll boot.
Last edited by ,
I mean, how can i turn off the switch. I used to be able to do it with previous version of hekateIt is on, it's just in RCM mode. Push a payload and you'll boot.
Do the migrate and it should fix it.Hi CTCaer, would it be possible to add a feature to Hekate to fix the user partition on eMMC upgrades?
https://drive.google.com/file/d/1LmNjw2wIrvDMiGYg3bqGWSozCdWQNfUh/viewIs there a patched version of Tinfoil that doesn't block because of Hekate?
biskeydump keys.txt
biskeys.txt
BOOT0
BOOT1
Partitions (<- FOLDER)
rawnand.bin.00
rawnand.bin.01
rawnand.bin.02
rawnand.bin.03
rawnand.bin.04
rawnand.bin.05
rawnand.bin.06
rawnand.bin.07
rawnand.bin.08
rawnand.bin.09
rawnand.bin.10
rawnand.bin.11
rawnand.bin.12
rawnand.bin.13
rawnand.bin.14
Restore (<- FOLDER)
BOOT0
BOOT1
dumps (<- FOLDER)
rawnand.bin.00
rawnand.bin.01
rawnand.bin.02
rawnand.bin.03
rawnand.bin.04
rawnand.bin.05
rawnand.bin.06
rawnand.bin.07
rawnand.bin.08
rawnand.bin.09
rawnand.bin.10
rawnand.bin.11
rawnand.bin.12
rawnand.bin.13
rawnand.bin.14
restore (<- FOLDER)
You're all good, the BOOT0/1 and rawnand.bin.* are the actual nand backup files that you need to restore. the key .txt files and the .bin files are extra dumps which you should keep around but aren't needed to restore.Umm guys?
I want to restore my old 3.0.0 NAND dump.
However I'm a bit confused that the folder content differs slightly.
Here's my 3.0.0 dump:
Code:biskeydump keys.txt biskeys.txt BOOT0 BOOT1 Partitions (<- FOLDER) rawnand.bin.00 rawnand.bin.01 rawnand.bin.02 rawnand.bin.03 rawnand.bin.04 rawnand.bin.05 rawnand.bin.06 rawnand.bin.07 rawnand.bin.08 rawnand.bin.09 rawnand.bin.10 rawnand.bin.11 rawnand.bin.12 rawnand.bin.13 rawnand.bin.14 Restore (<- FOLDER)
And my newer dumps look like this (the following example is a 6.1.0 dump):
Code:BOOT0 BOOT1 dumps (<- FOLDER) rawnand.bin.00 rawnand.bin.01 rawnand.bin.02 rawnand.bin.03 rawnand.bin.04 rawnand.bin.05 rawnand.bin.06 rawnand.bin.07 rawnand.bin.08 rawnand.bin.09 rawnand.bin.10 rawnand.bin.11 rawnand.bin.12 rawnand.bin.13 rawnand.bin.14 restore (<- FOLDER)
So basically the newer dump does not have the partitions folder which on the other hand is empty and might be ignorable?
The restore folders in both dumps only contain an empty partitions folder as well so they are ignorable too?
So the only difference is the dumps folder in my 6.1.0 dump which contains
a fuses.bin and a tsec_keys.bin while the old 3.0.0 dump contains
biskeydump keys.txt
biskeys.txt
in its main folder.
To make that short? Do I have to adjust a few things or can I restore that old 3.0.0 dump as it is with hekate 5.0.1?
Great, thanks mate!You're all good, the BOOT0/1 and rawnand.bin.* are the actual nand backup files that you need to restore. the key .txt files and the .bin files are extra dumps which you should keep around but aren't needed to restore.
It's a slow process. Hopefully it's done by nowHey how long does it usually take for Fix Archive bit (nintendo only) to work? It has been over an hour and I have around 20+ games installed
[config]
autoboot=1
autoboot_list=0
bootwait=1
verification=1
backlight=76
autohosoff=0
autonogc=1
{-- Custom Firmware --}
[CFW]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
atmosphere=1
logopath=bootloader/bootlogo.bmp
icon=bootloader/res/icon_payload.bmp
{}
[SX OS]
payload=bootloader/payloads/sx.bin
icon=bootloader/res/icon_sx.bmp
{}
[Lakka]
payload=lakka/boot/coreboot.rom
logopath=lakka/boot/splash.bmp
icon=bootloader/res/icon_lakka.bmp
{}
{---- Miscellaneous ---}
[Stock]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
stock=1
icon=bootloader/res/icon_switch.bmp
{}
That's an issue with Tinfoil, not Hekate. There is probably a patched NRO somewhere that don't show that message.Does anyone know why I get the msg " tinfoil detected you mayb e running kosmos or hekate custom firmware. please not that mis may cause unexpcted failures launching games. force the re-installation of games and many other issues..."
Then the app crashes.
[config]
autoboot=0
autoboot_list=0
bootwait=1
verification=1
backlight=100
autohosoff=0
autonogc=1
{AtlasNX/Kosmos v13.0.2}
{}
{Discord: discord.teamatlasnx.com}
{Github: git.teamatlasnx.com}
{Patreon: patreon.teamatlasnx.com}
{Pegascape DNS: pegascape.sdsetup.com}
{}
{--- Custom Firmware ---}
[CFW (SYSNAND)]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
atmosphere=1
logopath=bootloader/bootlogo.bmp
icon=bootloader/res/icon_payload.bmp
{}
[CFW (EMUMMC)]
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
atmosphere=1
logopath=bootloader/bootlogo.bmp
icon=bootloader/res/icon_payload.bmp
{}
{--- Stock ---}
[Stock (SYSNAND)]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
stock=1
icon=bootloader/res/icon_switch.bmp
{}
So, i screwed up by trying to update my clean switch to 8.1.0 with hekate's stock mode. Ending with burn fuses.
The problem is now the switch seems to go to RCM, but it wont let me inject a payload. When i connect the usb c cable, the switch boots to Horizon.
Switch was on 2.3.0 before this.
Could the hekate_ipl be the problem? I grabbed it from the Kosmos pack. Atmosphere and hekate from github.
Code:[config] autoboot=0 autoboot_list=0 bootwait=1 verification=1 backlight=100 autohosoff=0 autonogc=1 {AtlasNX/Kosmos v13.0.2} {} {Discord: discord.teamatlasnx.com} {Github: git.teamatlasnx.com} {Patreon: patreon.teamatlasnx.com} {Pegascape DNS: pegascape.sdsetup.com} {} {--- Custom Firmware ---} [CFW (SYSNAND)] emummc_force_disable=1 fss0=atmosphere/fusee-secondary.bin kip1patch=nosigchk atmosphere=1 logopath=bootloader/bootlogo.bmp icon=bootloader/res/icon_payload.bmp {} [CFW (EMUMMC)] fss0=atmosphere/fusee-secondary.bin kip1patch=nosigchk atmosphere=1 logopath=bootloader/bootlogo.bmp icon=bootloader/res/icon_payload.bmp {} {--- Stock ---} [Stock (SYSNAND)] emummc_force_disable=1 fss0=atmosphere/fusee-secondary.bin stock=1 icon=bootloader/res/icon_switch.bmp {}