Picofly AIO Thread

[abal1000x]

Wakakaa... by this time just use a pc and ryujinx .. you already throw away any portability.

ryujinx sux, i use on my crap amd, its stuttering.

 

[cgtchy0412]

ryujinx sux, i use on my crap amd, its stuttering.

Get an intel 12/13th gen... smooth .. but why are we discussing emulator here ..

 

[nico77]

Wakakaa... by this time just use a pc and ryujinx .. you already throw away any portability.

wkkwkwkk
i mean for people who use dock mode.
you know, some have TV setup.
Big TV

that fan can cooling on the dock setup.
for long play~
cuz some warm/hot air can trapped inside


i do test ryujinx and yuzu but... (wasnt my taste) uhuk-uhuk~

for PC
ma PC only for csgo

~this is da wey~

 

[BlueBeans]

Can anyone confirm the SDA/SCL points for a V1? They are not in the same spot as on the V2, like stated in the guide.

 

[jeka1981]

I have a problem on a second Switch Oled :
- i connect battery and switch showes me blue then yellow lights == == == three times and when i power on it goes to OFW and rp2040 is not blinking.
What is wrong ???

 

[deeps]

Can anyone confirm the SDA/SCL points for a V1? They are not in the same spot as on the V2, like stated in the guide.

erista glitches much more easily. you really shouldn't need sda/scl on it.

 

[jeka1981]

i found it : wrong 3.3V point

 

[chronoss]

Hi

I have a issue about the last Pico fw, since yesterday, i glicth a v2 console and all time, i have this error :
" *== No eMMC CMD1 request (poor wiring, or dead CPU) "

Today, i take a new chip, flash a fw_2.72_fix.uf2 fw and now, it work with the same flex installed...

Someone can explain me for what it don't work with the last fw and work great on 2.72

 

[rehius]

Someone can explain me for what it don't work with the last fw and work great on 2.72

looks like some pico boards can't handle 300 MHz

 

[abal1000x]

Hi

I have a issue about the last Pico fw, since yesterday, i glicth a v2 console and all time, i have this error :
" *== No eMMC CMD1 request (poor wiring, or dead CPU) "

Today, i take a new chip, flash a fw_2.72_fix.uf2 fw and now, it work with the same flex installed...

Someone can explain me for what it don't work with the last fw and work great on 2.72

Could you share what board is the failed board, and the success board?
Maybe different board use different crystal.

 

[chronoss]

looks like some pico boards can't handle 300 MHz

Can u send me 2.73 for test ?

And with the pico toolbox, can i downgrade the fw ?

 

[chronoss]

Could you share what board is the failed board, and the success board?
Maybe different board use different crystal.

Samething i see...
2.72 <-> 2.74

 

[abal1000x]

Samething i see...
2.72 <-> 2.74

The usb still intact?

If it is, could you try with current wire, to upload the 2.74 to make sure its really the problem lay on firmware version.

NVM too dangerous.

 

[Dee87]

Samething i see...
2.72 <-> 2.74

2.74 board has a resistor touching the boot button though XD

 

[chronoss]

2.74 board has a resistor touching the boot button though XD

you think it's a problem ?

 

[BlueBeans]

erista glitches much more easily. you really shouldn't need sda/scl on it.

Well idk why it won’t glitch for me. I’ve not had a single switch glitch for me on the first try without having to use the SDA/SCL lines. Added a photo of my single mosfet install.

 

[Dee87]

you think it's a problem ?

what u mean if i think its a problem Xdwhy wouldnt it be a problem Xd solder the resistor so it doesnt hav a connection to the boot button pad, its like asking if u have gnd and 3v having a connection is a problem ....
turn that resistor so it doesnt have a connection to the pad of the boot button

 

[rehius]

Can u send me 2.73 for test ?

https://github.com/rehius/usk/releases

And with the pico toolbox, can i downgrade the fw ?

Yes, even without the firmware file, "Rollback" option

 

[chronoss]

what u mean if i think its a problem Xdwhy wouldnt it be a problem Xd solder the resistor so it doesnt hav a connection to the boot button pad, its like asking if u have gnd and 3v having a connection is a problem ....
turn that resistor so it doesnt have a connection to the pad of the boot button

calmos bro !!!! just for fun.... i test it now...

https://github.com/rehius/usk/releases


Yes, even without the firmware file, "Rollback" option

ok thanks !!!

Post automatically merged: Jun 15, 2023

what u mean if i think its a problem Xdwhy wouldnt it be a problem Xd solder the resistor so it doesnt hav a connection to the boot button pad, its like asking if u have gnd and 3v having a connection is a problem ....
turn that resistor so it doesnt have a connection to the pad of the boot button

Congratulation to @Dee87 : you found the mistake and i will send u a picofly and your dream

Thanks a lot, its work well with the pico 2.74

 

[deeps]

Well idk why it won’t glitch for me. I’ve not had a single switch glitch for me on the first try without having to use the SDA/SCL lines. Added a photo of my single mosfet install.

and I haven't had a single switch not glitch for me with single mosfet to single cap and no sda/scl. I would try using a thicker wire for the mosfet