Homebrew RELEASE Clean the Nand of the Nintendo Switch, Haku33 homebrew

[lettuce]

Before using this should i remove incognito, AutoRCM and 90DNS or does haku33 do this automatically?

 

[Burrbands]

What if you've already connected the internet with cfw? I thought deleting logs can get you banned?

 

[pcwizard7]

Before using this should i remove incognito, AutoRCM and 90DNS or does haku33 do this automatically?

you should undo the incognito first but the rest doesn't matter

 

[Natalie Rath]

Anyone tried this with an SX core or SX lite switch?

 

[HenryMin]

Anyone tried this with an SX core or SX lite switch?

This homebrew uses 'reboot to payload', so it will not work on mariko.

 

[pcwizard7]

Anyone tried this with an SX core or SX lite switch?

DON'T DO IT, IT WILL BREAK

 

[lpoolm]

Hi, I am going to use this to reset my unpatched switch.
I have been upgrading the fw on my switch from around fw 6 (cannot remember exact) using choi so not to burn fuses.
Unfortunately my nand back up is gone as my external hdd died so no option to use that.
If I use this will I have any issues with my fuses not matching or will it just reset and reboot back to factory settings to start fresh?
Thanks

 

[pcwizard7]

it shouldn't affect the boot partitions so autorcm should be ok. you just need to make sure it doesn't boot with the normal bootloader. so before it reboots make sure you push a payload before it can boot. to avoid burn fuses

oh and if u have incodnito should restore your pro info first too

 

[Lordbarker]

Just to be clear does this just wipe the SysNAND partition if you are using EmuNAND? Or does it wipe both? Cheers

 

[kidkat210]

It wipes whatever nand your using it on

 

[Kadaz83]

Can i ask if its possible to clean nand when i use SX OS PRO..and do anyone have the NOOB Guide..Please..

--------------------- MERGED ---------------------------

Hi, Can i ask if its possible to clean Nand when im using SX OS PRO..if its possible..can i have a NOOB Guide..Please??

 

[Draxzelex]

Can i ask if its possible to clean nand when i use SX OS PRO..and do anyone have the NOOB Guide..Please..

--------------------- MERGED ---------------------------

Hi, Can i ask if its possible to clean Nand when im using SX OS PRO..if its possible..can i have a NOOB Guide..Please??

The guide is...using it. But there is no guarantee you won't be banned. In fact, someone has already been banned for using this.

 

[Waip]

I've just used it on a second hand switch to go legit
After updating and connecting to nintendo account it seems not banned
HOWEVER when I go to system / support I see that plenty of old Error logs are still there !! Not cleared by Haku33 ? Will I get banned for those ?!

 

[Draxzelex]

I've just used it on a second hand switch to go legit
After updating and connecting to nintendo account it seems not banned
HOWEVER when I go to system / support I see that plenty of old Error logs are still there !! Not cleared by Haku33 ? Will I get banned for those ?!

Will you? Only Nintendo can answer that question for you. Can you? The answer will always be yes.

 

[Waip]

So far so good, fingers crossed

 

[astoufu]

Hello guys, i still have some doubts. Can someone help me?

My Switch is on a very outdated Sysnand (5.x something) and i want to update it to play original games online. So is this the right order?

1- download haku 33 and run it;
2- After rebooting Switch, do a factory reset;
3- Update Sysnand through Nintendo's servers?

I dunno If i should use Nintendo's system to update or Daybreak and If i missing some other step

Thanks guys

 

[jackazz]

I might need some help too.. I saw on github that release 3.7 extended support to mariko consoles. Does this mean that haku33 will also work on my switch lite now?

I'm a switch lite SX owner; right now atmosphere cfw is installed on sysnand. I'd like to go back to a clean sysnand and start again, creating a brand new emunand.

Will my switch lite with sx modchip installed still boot into hekate after Haku33, when pressing vol down and power buttons? Will Haku affect my boot sequence as it is right now?

Many thanks, guys. I've bought a used Switch Lite which had nsp installed on it. I deleted 'em all cause i'm only interested in homebrew gaming. Old games, quake 2, dosbox, etc.. That's it and that's why I'd like to start clean and not risk a ban.

 

[androidguest64]

I might need some help too.. I saw on github that release 3.7 extended support to mariko consoles. Does this mean that haku33 will also work on my switch lite now?

I'm a switch lite SX owner; right now atmosphere cfw is installed on sysnand. I'd like to go back to a clean sysnand and start again, creating a brand new emunand.

Will my switch lite with sx modchip installed still boot into hekate after Haku33, when pressing vol down and power buttons? Will Haku affect my boot sequence as it is right now?

Many thanks, guys. I've bought a used Switch Lite which had nsp installed on it. I deleted 'em all cause i'm only interested in homebrew gaming. Old games, quake 2, dosbox, etc.. That's it and that's why I'd like to start clean and not risk a ban.

Hi @jackazz, did you find your answer?

 

[pcwizard7]

Hi @jackazz, did you find your answer?

mariko consoles are the switches that come in all red box and switch lite. so yes it should support it.

I would really only use this tool if i didn't have a clean backup and i d never gone online yet and wanted to start.

 

[androidguest64]

mariko consoles are the switches that come in all red box and switch lite. so yes it should support it.

I would really only use this tool if i didn't have a clean backup and i d never gone online yet and wanted to start.

But on Haku33 github page, it's say:

> Mariko units are not supported avode 2.8 payloads can't be loaded

can you elaborate?