Yes, use sys-clk to overclock, the forwarder literally just runs the chiaki nroDo we need to install anything with this forwarder (like sys-clk)?
Yes, use sys-clk to overclock, the forwarder literally just runs the chiaki nroDo we need to install anything with this forwarder (like sys-clk)?
Tested and it works like a charme, it only needs support for user PIN when waking up the PS4 (the screen remains green if the PS4 is in rest mode)Yes, use sys-clk to overclock, the forwarder literally just runs the chiaki nro
[YOURPS4]
host_ip = "192.168.0.100"
video_resolution = "720p"
video_resolution = 60
psn_account_id = "SEE FIRST POST ON HOW TO GET YOURS"
rp_key = "SEE FIRST POST ON HOW TO GET YOURS"
rp_regist_key = "SEE FIRST POST ON HOW TO GET YOURS"
rp_key_type = SEE FIRST POST ON HOW TO GET YOURS
Exactly the same issue here.Thank you so much for this port! I'm a little stuck though. I only get a green screen on my switch and the error code CE-35413-6 on my PS4. This error code indicates PIN code for RemotePlay is incorrect from Sony/PS support. But I never get any promt to enter the PIN? just a green screen on the Switch. I'm on 5.05 and using SXOS on the switch.
Chiaki works fine from Android.
Any suggestions, please? Is it possible to define the PIN in the .conf-file? Thanks!
I couldn't use it, im arelady a user of Chiaki on Linux and Android but somehow it doesn't worked on switch.
Terminal output is:
Sending chiaki.nro, 18829882 bytes
8585493 sent (45.60%), 760 blocks
starting server
server active ...
initNxLink Loading chaki lib
Loading socket
Loading SDL2 window
Read chiaki settings file
fstream
[E] too many or to too few host to connect
exiting ...
Cannot find another log.
Got it working, i needed to put chiaki.conf in the /switch folder inside sdcard
Got it working,
The chiaki.conf need to be in /switch folder inside SDcard.
Hi there,I just got tested and I'm not disappointed!
CPU - 1200mh, Wifi 5GHz
I tested and no worries to declare : 720p 30fps
Tales of Berseria
The legend of Heroes
FF7R
Persona 5 Royal
Ratchet
I, who play less ps4 now, will get back to it!
PS4 Pro KH édition.
Exactly the same issue here.
I go to system settings --> remote play --> add a device, the pin starts showing
I run chiaki.nro with the conf file below.
I get a remote pin error (CE-35413-6) and then a green screen on chiaki, there is no prompt to enter the pin
I've got 7.51 system update, remote play has been tested with the same psn_account_id
My flat file config is as follows:
# required: PS4-XXX (PS4 local name)
# name from PS4 Settings > System > system information
#I have entered this with box brackets, without it chiaki.nro appears to crash <- is this correct?
[name as in system settings]
# required: lan PS4 IP address
# IP from PS4 Settings > System > system information
host_ip = 192.168.x.xxx
# required: sony oline id (login)
# i have entered this here, even with 7.51 from the python script
psn_online_id = psn_online_id
# required (PS4>7.0 Only):
#I have entered this as per the python script - and have tested with chiaki windows
psn_account_id = psn_account_id
# optional(default 30): remote play fps (must be 30 or 60)
video_fps = 30
# optional(default 720p): remote play resolution (must be 1080p, 720p, 540p, 360p)
# 1080p is for ps4 pro only
video_resolution = 720p
Hi,Hi @H0neyBadger
I've loaded the nro via nxlink on hbmenu using netloader.
However, I need some help decoding the logs. It would be great if you could help
Cheers!
Hi,I played around with the config and now i can't say that have good results with chiaki running on Horizon as well.
I have an extender and connect my ps4 via lan on it.
I even bought a switch lan adapter but i audio delays and video pixel stutter to the point I can't really use it.
But I have faith in the port, I'm sure it will get better.
I still have trouble compiling it with the newest devkitpro update.
That being said, I'm just starting out in learning c++
As far as I can see this log exit after setting parsing.I couldn't use it, im arelady a user of Chiaki on Linux and Android but somehow it doesn't worked on switch.
Terminal output is:
Sending chiaki.nro, 18829882 bytes
8585493 sent (45.60%), 760 blocks
starting server
server active ...
initNxLink Loading chaki lib
Loading socket
Loading SDL2 window
Read chiaki settings file
fstream
[E] too many or to too few host to connect
exiting ...
Cannot find another log.
HiThank you so much for this port! I'm a little stuck though. I only get a green screen on my switch and the error code CE-35413-6 on my PS4. This error code indicates PIN code for RemotePlay is incorrect from Sony/PS support. But I never get any promt to enter the PIN? just a green screen on the Switch. I'm on 5.05 and using SXOS on the switch.
Chiaki works fine from Android.
Any suggestions, please? Is it possible to define the PIN in the .conf-file? Thanks!
HiThanks for your work!
Ps4 Slim on Lan Gigabit
Switch on 5GHz Wifi AC (half meter)
All Test done with Persona 5 Royale:
540p 30 fps: no problem
720p 30 fps : graphic and audio problem when run
720p 30 fps 1,2GHz OC: no problem
720p 60 fps 1,2GHz OC: graphic and audio problem when run
Not yet OC Ram but doubt that will resolve.