Never use Youtube videos for anythin on switch the get outdated almots on the minute are published, normally are incomplete.
use reputable guides like the tutorials here.
Hacking Boot0 or boot1 won't mount to pc through hekate
- Thread starter GreenDuck65777
- Start date
- Views 9,234
- Replies 164
use reputable guides like the tutorials here.
Yup, this one
Post automatically merged:
Yeah, yeah I know that. But what should I do now, I don't know.
Yeah, v2 and then v3 if it still doesn't work. V2 should repair your emmc if your keys works.
In this case, it's up to date.
But, my keys not changed. It's still 4 kB and only 58 keys.
Attachments
Ignore that, since it can't get the KEYS from the SYSNAND. As long as you get your master keys such as BIS etc it should be alright since they're stored in the APU (Nvidia chip)
So, how can I get master keys and bis keys? It's not in sysmmc? I mean not on emmc chip?
sysnand = emmc = the storage partition. Some keys are stored there like the universal keys like the once the emulators use. You don't need them in this case (hopefully not)
As long as you've got the keys these keys - https://gbatemp.net/threads/boot0-or-boot1-wont-mount-to-pc-through-hekate.649385/post-10365016 it should be fine and should be possible to mix the universal list with your keys.
Most important now are the BIS keys
show us your PROD.KEYS file, (please remove the values of the keys.
Formatting the eMMC with Windows is not a good idea unless you really know what you're doing. This could mess things up even more by erasing any data that could help fix your Switch if you don't have the right backups.
Also, using someone else's prod.keys and downloading firmware off the internet to fix your Switch is not safe. It might seem like an easy solution, but it can cause more problems, like making your Switch not work at all. Plus, using someone else's keys and software you got from the internet can get you into trouble with Nintendo's rules.
Also, using someone else's prod.keys and downloading firmware off the internet to fix your Switch is not safe. It might seem like an easy solution, but it can cause more problems, like making your Switch not work at all. Plus, using someone else's keys and software you got from the internet can get you into trouble with Nintendo's rules.
As you can see big chunk of keys are missing
Post automatically merged:
Bru it's not funny. I know what we doin' here. Especially it's Nintendo pirate thread.
Attachments
- Joined
- Sep 2, 2020
- Messages
- 1,305
- Trophies
- 0
- Age
- 39
- Location
- TORONTO
- Website
- form.jotform.com
- XP
- 2,244
- Country
based on cal0 info corrupted and your v1 unpatched device on 17+ OFW, I doubt the console previous been Incognito and SN blanked out on sysnand.
FYI, have you ever restore/overwire any partition from donor/other device?
FYI, have you ever restore/overwire any partition from donor/other device?
Yea since you are missing the expected keys.
aes_kek_generation_source =
aes_key_generation_source =
bis_kek_source =
bis_key_00 =
bis_key_01 =
bis_key_02 =
bis_key_03 =
bis_key_source_00 =
bis_key_source_01 =
bis_key_source_02 =
device_key =
device_key_4x =
Even though you got bis_key_source you don't actually have the key, along with the device key.
I have some keys in tegraexplorer. In "view dumped keys"
Attachments
- Joined
- Sep 2, 2020
- Messages
- 1,305
- Trophies
- 0
- Age
- 39
- Location
- TORONTO
- Website
- form.jotform.com
- XP
- 2,244
- Country
Newer Tegraexplorer is based on keys dumped by Lockpick/picklock, Tex doesnt dump any
It can be. Because I bought it from hands.
Post automatically merged:
No, real keys. But for some reason it's not appearing in prod.keys file. Aaaand Idk why. After reinstall tegraexplorer in "view dumped keys" there appeared some keys, before it was just zeros and pkg1 was "unk"
Similar threads
