Homebrew Animated Forwarder & Hybrid Channels By pepxl

[atrophis]

just pop the list of the ones not working properly and ill see what i can do as im getting a USB Gecko soon(again got sent a damn Sd gecko instead lolz) so i should be able to debug them properly to find the errors(when i figure out how to use the gecko loz) but im gonna guess they are the emulator ones which dont fine the HDD but this only seems to be a hand full of users with certain HDD's

The 4 that I am having problems with are listed below. But I have not tried them all.

MPlayer CE
WiiXplorer
Nintendo
Super Nintendo

If you need anything more, let me know.

 

[pepxl]

just pop the list of the ones not working properly and ill see what i can do as im getting a USB Gecko soon(again got sent a damn Sd gecko instead lolz) so i should be able to debug them properly to find the errors(when i figure out how to use the gecko loz) but im gonna guess they are the emulator ones which dont fine the HDD but this only seems to be a hand full of users with certain HDD's

The 4 that I am having problems with are listed below. But I have not tried them all.

MPlayer CE
WiiXplorer
Nintendo
Super Nintendo

If you need anything more, let me know.

mm strange your having trouble with MPlayer and WiiXplorer, anyway try these they should work i use them and havent had any problems, the dols are the same used in the Back Edition Forwarders(which i use) and they work flawlessly for me

SM4.1E
cIOS 202,222,223,224 V5
cIOS 249/250 Rev 17
WD My Book 1TB
WD Passport 250GB
Sandisk Cruzer 4GB
PNY 2GB Stick

WiiXplorer - Rev 152
MPlayer CE 0.75 also works with 0.76+ and betas
Nintendo(FCEUGX) works fine from SD and reading HDD with latest rev
Super Nintendo(SNES9XGX) works fine from SD and reading HDD with latest rev

post your app revs and ill be able to better test but these should work fine

WiiXplorer
MPlayer CE
Nintendo
Super Nintendo

 

[atrophis]

mm strange your having trouble with MPlayer and WiiXplorer, anyway try these they should work i use them and havent had any problems, the dols are the same used in the Back Edition Forwarders(which i use) and they work flawlessly for me

SM4.1E
cIOS 202,222,223,224 V5
cIOS 249/250 Rev 17
WD My Book 1TB
WD Passport 250GB
Sandisk Cruzer 4GB
PNY 2GB Stick

WiiXplorer - Rev 152
MPlayer CE 0.75 also works with 0.76+ and betas
Nintendo(FCEUGX) works fine from SD and reading HDD with latest rev
Super Nintendo(SNES9XGX) works fine from SD and reading HDD with latest rev

post your app revs and ill be able to better test but these should work fine

WiiXplorer
MPlayer CE
Nintendo
Super Nintendo

Alright, I'll give them a shot when I get home tonight. It will probably be later, but I will post the results and version when I do it. Also, do you know what is causing that message that I am seeing flash between the forwarder and the apps loading? It looks like a red box that has the words "Loading, please wait..." but it's hard to tell because it happens so fast.

 

[12345]

didnt you have towerdefense, smw and some other on the done requestlist, but they aint added to the first post?

 

[pepxl]

mm strange your having trouble with MPlayer and WiiXplorer, anyway try these they should work i use them and havent had any problems, the dols are the same used in the Back Edition Forwarders(which i use) and they work flawlessly for me

SM4.1E
cIOS 202,222,223,224 V5
cIOS 249/250 Rev 17
WD My Book 1TB
WD Passport 250GB
Sandisk Cruzer 4GB
PNY 2GB Stick

WiiXplorer - Rev 152
MPlayer CE 0.75 also works with 0.76+ and betas
Nintendo(FCEUGX) works fine from SD and reading HDD with latest rev
Super Nintendo(SNES9XGX) works fine from SD and reading HDD with latest rev

post your app revs and ill be able to better test but these should work fine

WiiXplorer
MPlayer CE
Nintendo
Super Nintendo

Alright, I'll give them a shot when I get home tonight. It will probably be later, but I will post the results and version when I do it. Also, do you know what is causing that message that I am seeing flash between the forwarder and the apps loading? It looks like a red box that has the words "Loading, please wait..." but it's hard to tell because it happens so fast.


the box is just a loading message in Waninkoko's NAND loader but i nolonger use it now, Comex's NAND loader is not used in all/most forwarders i do

QUOTE(12345 @ Apr 9 2010, 02:12 PM)

didnt you have towerdefense, smw and some other on the done requestlist, but they aint added to the first post?

they where done but i planned on redoing so GFX in them but haven got round to ding it

 

[atrophis]

mm strange your having trouble with MPlayer and WiiXplorer, anyway try these they should work i use them and havent had any problems, the dols are the same used in the Back Edition Forwarders(which i use) and they work flawlessly for me

SM4.1E
cIOS 202,222,223,224 V5
cIOS 249/250 Rev 17
WD My Book 1TB
WD Passport 250GB
Sandisk Cruzer 4GB
PNY 2GB Stick

WiiXplorer - Rev 152
MPlayer CE 0.75 also works with 0.76+ and betas
Nintendo(FCEUGX) works fine from SD and reading HDD with latest rev
Super Nintendo(SNES9XGX) works fine from SD and reading HDD with latest rev

post your app revs and ill be able to better test but these should work fine

WiiXplorer
MPlayer CE
Nintendo
Super Nintendo

Ok. Still a no go. The USB drive fails to be detected when these apps are launched with these forwarders. I do like the loading screen better though.

Versions are:

WiiXplorer - r150
Mplayer CE - 0.76
FCEUGX - 3.1.6
SNES9XGX - 4.1.6

Also noticed this, when quitting those apps after they have been launched with the forwarders and it kicks me back to the SM, I see the health screen before the SM. The CFG forwarder does not do this.

 

[pepxl]

mm strange your having trouble with MPlayer and WiiXplorer, anyway try these they should work i use them and havent had any problems, the dols are the same used in the Back Edition Forwarders(which i use) and they work flawlessly for me

SM4.1E
cIOS 202,222,223,224 V5
cIOS 249/250 Rev 17
WD My Book 1TB
WD Passport 250GB
Sandisk Cruzer 4GB
PNY 2GB Stick

WiiXplorer - Rev 152
MPlayer CE 0.75 also works with 0.76+ and betas
Nintendo(FCEUGX) works fine from SD and reading HDD with latest rev
Super Nintendo(SNES9XGX) works fine from SD and reading HDD with latest rev

post your app revs and ill be able to better test but these should work fine

WiiXplorer
MPlayer CE
Nintendo
Super Nintendo

Ok. Still a no go. The USB drive fails to be detected when these apps are launched with these forwarders. I do like the loading screen better though.

Versions are:

WiiXplorer - r150
Mplayer CE - 0.76
FCEUGX - 3.1.6
SNES9XGX - 4.1.6

Also noticed this, when quitting those apps after they have been launched with the forwarders and it kicks me back to the SM, I see the health screen before the SM. The CFG forwarder does not do this.

im stumped to what it is until my gecko gets here as the dol's that boot those apps are taken from the BE forwarders which work for me without problems.

the forwarders are designed to reset the wii rather than boot straight back to SM due to some apps being picky and giving a DSI when exited so to save the hassle most/all my forwarders reset, its easier then having to recompile apps to exit where launched from properly

the cfg forwarder does the same but if your config.txt is setup to reboot to SM it will override the forwarder and return properly

edit

are you booting apps from SD or USB?
is the HDD FAT partition set to primary and active also is it the first partition on the drive?
do you have IOS202 installed and what version is it, where is the installer from and what merge settings are used?

 

[atrophis]

im stumped to what it is until my gecko gets here as the dol's that boot those apps are taken from the BE forwarders which work for me without problems.

the forwarders are designed to reset the wii rather than boot straight back to SM due to some apps being picky and giving a DSI when exited so to save the hassle most/all my forwarders reset, its easier then having to recompile apps to exit where launched from properly

the cfg forwarder does the same but if your config.txt is setup to reboot to SM it will override the forwarder and return properly

Ok. I'll sit on it for a while until I see what you can come up with after your get your gecko. Thanks for the help though.

 

[jaynjolie]

ive got a little prob ....i hope you can help ..im using cios x rev 19 base 57 ..... the nintendo emulator channels work fine for me ...theres the 2 sega forwarders i cant get working... smsgx and sega genesis gx ..they load fine and play from SD but code dump on exit...need to hard reset to get out of it ...any ideas why??

 

[smashdude]

I have got a problem too. Why is there no reboot on Gecko 1.9.3.1?

 

[C.S.I.]

Thanks for theses, pepxl

 

[pepxl]

ive got a little prob ....i hope you can help ..im using cios x rev 19 base 57 ..... the nintendo emulator channels work fine for me ...theres the 2 sega forwarders i cant get working... smsgx and sega genesis gx ..they load fine and play from SD but code dump on exit...need to hard reset to get out of it ...any ideas why??

I'll be sorting that out soon but till then theres nothing i can do sorry

QUOTE(smashdude @ Apr 15 2010, 01:09 AM) I have got a problem too. Why is there no reboot on Gecko 1.9.3.1?

these are forwarders they have nothing to do with your Gecko problem, stop spamming with your continues ignorance and failure to understand anything

 

[smashdude]

Then help me please. How does everyone else get Gecko 1.9.3.1 to have the rebooter option but not me? What do I have to do differently?

 

[DarkShadow96]

Then help me please. How does everyone else get Gecko 1.9.3.1 to have the rebooter option but not me? What do I have to do differently?

*facepalm* For fucks sakes man. Stay on the one thread you posted your question at and wait for the answer instead of running all over the place like a wild chicken. I responded to you and your still running around...

 

[jaynjolie]

ive got a little prob ....i hope you can help ..im using cios x rev 19 base 57 ..... the nintendo emulator channels work fine for me ...theres the 2 sega forwarders i cant get working... smsgx and sega genesis gx ..they load fine and play from SD but code dump on exit...need to hard reset to get out of it ...any ideas why??

I'll be sorting that out soon but till then theres nothing i can do sorry

QUOTE(smashdude @ Apr 15 2010, 01:09 AM) I have got a problem too. Why is there no reboot on Gecko 1.9.3.1?

these are forwarders they have nothing to do with your Gecko problem, stop spamming with your continues ignorance and failure to understand anything

thanks for the quick reply ...i just wasnt sure if it was my system or the forwarder .... and by the way your channels look awesome .. much appreciated

 

[smashdude]

I have done your advice but still neoGama is not listed on my HBC.

 

[atrophis]

im stumped to what it is until my gecko gets here as the dol's that boot those apps are taken from the BE forwarders which work for me without problems.

Any chance to look into this?

 

[pepxl]

im stumped to what it is until my gecko gets here as the dol's that boot those apps are taken from the BE forwarders which work for me without problems.

Any chance to look into this?

i'll try but im pressed for time, you could try updated to 4.2 if not already, install IOS202v5, update your apps to their latest revs, update your IOS to the latest non stubbed versions

 

[Tsunii]

dunno if it's been asked before
but i would really appreciate it if you could do a forwarder for the savegame manager gx

here's the link to the app:
http://code.google.com/p/savegame-manager-gx/

 

[pepxl]

dunno if it's been asked before
but i would really appreciate it if you could do a forwarder for the savegame manager gx

here's the link to the app:
http://code.google.com/p/savegame-manager-gx/

If you have any requests check the "Requests" first before posting/PMing one

CLOSED TIL FURTHER NOTICE


requests are welcome and will be done in good time

ON HOLD, SORRY