Homebrew 2168-0003 error trying to install switch homebrew launcher

Jimmay123 · Feb 19, 2018

im getting mad now people and need help
ive tried two different micro sd cards neither seem to be doing the job i put the file on the root of the micro sd after formating both via console and the pc changed the dns and it keeps throwing 21688-0003 errors my way and wont work it makes me hold the power button and on reboot my mii is corrupted

anyone got any ideas im losing my mind trying to get it up and running

Jimmay123 · Feb 19, 2018

https://twitter.com/twitter/statuses/965649148082118656

heres a video of the error happening and yep it is with both sd cards and i am on 3.0.0

Joylander · Feb 19, 2018

I don't get any error message just stuck on pegaswitch screen forever and if I select back to install & run screen and select one of them then I get an error message.

Help me

Jimmay123 · Feb 19, 2018

i managed it now these were my steps
1. format sd via switch
2. extract the zip directly to the sd instead of elsewhere using an sd reader
3. try it a few times

job done at least for me if anyone gets the problems give it a whirl

Tomobobo · Feb 19, 2018

How to format sd card with the switch?

Jimmay123 · Feb 19, 2018

Tomobobo said:
How to format sd card with the switch?

in the options/settings on the device right to the bottom theres an option under system called formatting options at the bottom from there select format sd card

Tomobobo · Feb 19, 2018

I do not have this option. Or am blind.

Joylander · Feb 19, 2018

Tomobobo said:
How to format sd card with the switch?

I have not formatted it from the console, now I try

DocKlokMan · Feb 20, 2018

Jimmay123 said:
im getting mad now people and need help
ive tried two different micro sd cards neither seem to be doing the job i put the file on the root of the micro sd after formating both via console and the pc changed the dns and it keeps throwing 21688-0003 errors my way and wont work it makes me hold the power button and on reboot my mii is corrupted

anyone got any ideas im losing my mind trying to get it up and running

Try now, the issue should be fixed.

Kerbangman · Feb 20, 2018

AnalogMan said:
Try now, the issue should be fixed.

Not fixed here.

Saver175 · Feb 20, 2018

I got error 21688-0001 any help please

Kerbangman · Feb 20, 2018

Download the installer again.
I dont think they are increasing the version number and I think they updated the installer.
Do a shutdown and not a restart if it goes wrong.

Worked for me in the end but you need to retry.

digipimp75 · Feb 20, 2018

Thank you!!! I was getting the 2168-0003 error using a 128gb Samsung microsd. I couldn't format it via the Switch itself, since it's an sdxc and the system kept prompting for an update. So I did the following:

Format the sd card as FAT32 on the pc using EaseUS partition tool
Pop the sd into the Switch to make sure that it recognizes it and creates the "Nintendo" folder
Inserted the sd back to the pc, and extract the zip file DIRECTLY to the sd root as opposed to extracting it to a local folder then transferring over.
Followed the installation steps and voila! Now getting the HBL to install correctly.

I couldn't figure out why I kept getting that 2168-0003 error before, but the only real change I made was extracting the zip directly to sd and that seemed to work. Thanks again!

Joylander · Feb 20, 2018

Oh finally i have used hotspot's cell and now si all ok

Kerbangman · Feb 20, 2018

digipimp75 said:
Thank you!!! I was getting the 2168-0003 error using a 128gb Samsung microsd. I couldn't format it via the Switch itself, since it's an sdxc and the system kept prompting for an update. So I did the following:

Format the sd card as FAT32 on the pc using EaseUS partition tool

Pop the sd into the Switch to make sure that it recognizes it and creates the "Nintendo" folder

Inserted the sd back to the pc, and extract the zip file DIRECTLY to the sd root as opposed to extracting it to a local folder then transferring over.

Followed the installation steps and voila! Now getting the HBL to install correctly.

I couldn't figure out why I kept getting that 2168-0003 error before, but the only real change I made was extracting the zip directly to sd and that seemed to work. Thanks again!

I had the 0003 error and found that I needed to power down/shutdown rather than retart after installing.

If you have the pegaswitch screen when installing.
Let it retstart then shutdown.
Start the switch and go through and run.
Then the album should work ok.

Homebrew 2168-0003 error trying to install switch homebrew launcher

Well-Known Member

Well-Known Member

Member

Well-Known Member

Champion.

Well-Known Member

Champion.

Member

Plugin Dev

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Similar threads

Popular threads in this forum