Hacking [Release] rxTools - Roxas75 3DS Toolkit [fw 2.0 - 9.2]

hippy dave · Jul 1, 2015

Thanks @Roxas75 for your invaluable contributions to the scene, all the best & don't be afraid to come back and say hi!

hremerald · Jul 1, 2015

@Roxas75 Thanks for your work (even if you have read but not answer my PM lol)

alantgw · Jul 1, 2015

@Roxas75
Sad and suprised to know that you are leaving the scene.
Anyway, real life matters come first, hope you all the best!

DSoryu · Jul 1, 2015

As said by others, you were a talented dev to the scene, since the beggining when you reached decryption features on 9.2 and many other useful things, to your main project, rxtools, I've used it since it was only a decryption an dumping tool, very useful, and when you added the emuNAND support, I were able to use the official features without the need to update.

Me and everyone send you a very big THANK YOU! and the best wishes for you.

prototech · Jul 1, 2015

Syphurith said:
This is what i wanna say, thanks.

It is said that you must ever install GW mset and run GW classic mode, so then you can get rx one running. I don't know why and not sure about it.
Sometime i would face such black screens too (after "Press R to menu"). It isn't very stable. if press R to enter menu then start emunand, it does boot. Then ok.

Do you mention this rxTools? Official Rx is now with sig-check patched, also emunand for O3DS.

I am using this rxTools, and I tried booting into Gateway classic mode and then tried rxTools again but I still get the black screen. I've tried to boot rxTools at least 15 times now with no luck, yet Gateway still boots emuNAND every time.

Syphurith · Jul 1, 2015

prototech said:
I am using this rxTools, and I tried booting into Gateway classic mode and then tried rxTools again but I still get the black screen. I've tried to boot rxTools at least 15 times now with no luck, yet Gateway still boots emuNAND every time.

So unlucky that i can't even believe. Well if you don't need those region-free and AGB feature, you could just fall back to use 2.5.2 instead.
I know the 2.6 is a little buggy (not so stable) now. Hope you good luck.

prototech · Jul 1, 2015

Syphurith said:
So unlucky that i can't even believe. Well if you don't need those region-free and AGB feature, you could just fall back to use 2.5.2 instead.
I know the 2.6 is a little buggy (not so stable) now. Hope you good luck.

I figured it out. I deleted the rxTools folder on my SD card and it started working.

happydance · Jul 1, 2015

it was a short time but I appreciate your work on rxtools @Roxas75

*noob question*
forgive my lack of knowledge in this question... isn't pasta is coded to use arm9 and rxtools... arm11? not sure if I remember or used the right terms... so does that mean paste will switch to arm11? or the other way around?

DarkMatterCore · Jul 1, 2015

happydance said:
it was a short time but I appreciate your work on rxtools @Roxas75

*noob question*
forgive my lack of knowledge in this question... isn't pasta is coded to use arm9 and rxtools... arm11? not sure if I remember or used the right terms... so does that mean paste will switch to arm11? or the other way around?

Features available in PastaCFW that aren't present in rxTools will get ported over to this codebase, as @AlbertoSONIC already said. It is probably much easier that way, given the fact that rxTools already supports the entrypoints for additional exploits. In the meantime, I guess that the compatibility with Ninjhax can also be improved.

@Syphurith Will the new project remain as a fork? I was working on a way to add the AGB BIOS (Nostalgia) patch to the rxMode source.

Syphurith · Jul 1, 2015

DarkMatterCore said:
Features available in PastaCFW that aren't present in rxTools will get ported over to this codebase, as @AlbertoSONIC already said. It is probably much easier that way, given the fact that rxTools already supports the entrypoints for additional exploits. In the meantime, I guess that the compatibility with Ninjhax can also be improved.

@Syphurith Will the new project remain as a fork? I was working on a way to add the AGB BIOS (Nostalgia) patch to the AGB_FIRM source in rxMode.

Eh, i don't know really, since that's AlbertoSONIC's repo now. It could be start all over after create a new repo and upload, or he could delete the repo and contact Roxas for tranfer it to him. Well for the 2nd choice, our repo would be the downstream from it then. Whichever he choose it doesn't bother me too much.

DarkMatterCore · Jul 1, 2015

Syphurith said:
Eh, i don't know really, since that's AlbertoSONIC's repo now. It could be start all over after create a new repo and upload, or he could delete the repo and contact Roxas for tranfer it to him. Well for the 2nd choice, our repo would be the downstream from it then. Whichever he choose it doesn't bother me too much.

That's good to know. Let's just wait for @AlbertoSONIC 's opinion on this matter.

happydance · Jul 1, 2015

DarkMatterCore said:
Features available in PastaCFW that aren't present in rxTools will get ported over to this codebase, as @AlbertoSONIC already said. It is probably much easier that way, given the fact that rxTools already supports the entrypoints for additional exploits. In the meantime, I guess that the compatibility with Ninjhax can also be improved.

@Syphurith Will the new project remain as a fork? I was working on a way to add the AGB BIOS (Nostalgia) patch to the rxMode source.

thanks for the clarifications

may I wish for a OOT support? please? since a lot of people also have them and might be useful as extry poin on n3ds. I just thought that since regionfour can be used by cubic ninja and Zelda OOT... maybe the same thing can be done with pasta

Apache Thunder · Jul 1, 2015

AlbertoSONIC said:
It will die in the dark

But we'll port every feature (companion app too) so you won't feel the difference

I assume this means you'll be fixing the draw.c code so bottom screen can actually be used properly? My private build has a splash screen on the bottom screen. But it only works half the time (bottom screen remains white when it decides not to work) and breaks Ninjhax/MSET support. Bottom screen normally remains white in original build when booting from spider which is my primary entry point for rxTools.

The draw code seems unstable in Ninjhax. I can't display text on the top screen (during the splash logo anyway) without it being glitched. Most of the text is off the left side and some spills over onto the bottom screen somehow even though I hadn't written anything to bottom screen. Ninjhax version just behaves weird at the moment.

Rob Blou · Jul 1, 2015

Thanks for everything Roxas75! It's always sad to see talented dev like you leave :/ I wish you the best!

AlbertoSONIC · Jul 1, 2015

Apache Thunder said:
I assume this means you'll be fixing the draw.c code so bottom screen can actually be used properly? My private build has a splash screen on the bottom screen. But it only works half the time (bottom screen remains white when it decides not to work) and breaks Ninjhax/MSET support. Bottom screen normally remains white in original build when booting from spider which is my primary entry point for rxTools.

The draw code seems unstable in Ninjhax. I can't display text on the top screen (during the splash logo anyway) without it being glitched. Most of the text is off the left side and some spills over onto the bottom screen somehow even though I hadn't written anything to bottom screen. Ninjhax version just behaves weird at the moment. [emoji14]

I'm going to port pasta draw.c and pass botton screen offsets, which changes in every entrypoint. I still haven't tried anything, 'cause I have yet to get rxtools to compile

AlbertoSONIC · Jul 1, 2015

happydance said:
it was a short time but I appreciate your work on rxtools @Roxas75

*noob question*
forgive my lack of knowledge in this question... isn't pasta is coded to use arm9 and rxtools... arm11? not sure if I remember or used the right terms... so does that mean paste will switch to arm11? or the other way around?

Both pasta and rxtools start from an arm11 entrypoint and work on arm9 so no, i don't have to move pasta on arm11

Apache Thunder · Jul 1, 2015

AlbertoSONIC said:
I'm going to port pasta draw.c and pass botton screen offsets, which changes in every entrypoint. I still haven't tried anything, 'cause I have yet to get rxtools to compile

What errors do you get when you attempt to compile it?

AlbertoSONIC · Jul 1, 2015

#include <stdio.h> : stdio.h no such file or directory

Ekaitz · Jul 1, 2015

Thank you for your work Roxas, alot of things wouldn't be possible without your amazing tools.

I wish you the best for the future.

Small question about the MSET downgrade.... I downgraded the MSET on a 9.2 O3DS using RxTools 2.6... Can we install the rxtools launching exploit using the browser or we've got to use a DS flashcart? ('cause I don't have one!)

Long live rxPasta!

AlbertoSONIC · Jul 1, 2015

rxTools by Pasta

or

rxTools -with Pasta-

?

Hacking [Release] rxTools - Roxas75 3DS Toolkit [fw 2.0 - 9.2]

BBMB

Well-Known Member

Well-Known Member

GBA/NDS Maniac

Well-Known Member

Beginner

Well-Known Member

Well-Known Member

Finding my light.

Beginner

Finding my light.

Well-Known Member

I have cameras in your head!

Well-Known Member

Pasta Team Member

Pasta Team Member

I have cameras in your head!

Pasta Team Member

Redhead Believer

Pasta Team Member

Similar threads

Popular threads in this forum