Hardware N3DS NAND backup possible, I hope.

[Lonlykids]

The Transcend P8 TS-RDP8K : ALCOR AU6476 is not works on the new 3dsll with samsung emmc . it can not be detected . it is hard to find the Anker Card Reader in China......i am so unfortunately

--------------------- MERGED ---------------------------



I had try lots of reader,include the RTS5309 RTS5156 RTS5308 . they are all down...hard to find RTS5301 or RTS5306 OR RTS5307

GL827L is down

 

[GizmoTheGreen]

alot of the guides out there say don't bother with the other DAT lines... but it wouldn't hurt right? it should be faster with all 4?

 

[mobi74]

Hi guys, today I broke the two little pads for CLK, and now cant weld anything there, and now when I try to turn on my N3DS I can see a boot error for 1 second then the nds are auto turned off, I have a chance to fix this? advice are welcome.

Thanks

 

[vb_encryption_vb]

Hi guys, today I broke the two little pads for CLK, and now cant weld anything there, and now when I try to turn on my N3DS I can see a boot error for 1 second then the nds are auto turned off, I have a chance to fix this? advice are welcome.

Thanks

Pads are lifted. Its all over now..

 

[mobi74]

Pads are lifted. Its all over now..

I think is possible fix this problem, with the alternative point on side A I can see a 0ohm from the second pad, now I need "only" a second alternative pad connected to the first pad then make a bridge with a wire.

 

[vb_encryption_vb]

I think is possible fix this problem, with the alternative point on side A I can see a 0ohm from the second pad, now I need "only" a second alternative pad connected to the first pad then make a bridge with a wire.

First pad is gone....

 

[tekimotop]

.

 

[vb_encryption_vb]

Please help
I hardomodded my new 3ds xl.An expert did the soldering and I am sure that the soldering is perfect.He also hardmoded a 2ds right before hardmoding mine it it works just fine.
The problem is that when we try to boot the console,the screen flashes with a popping sound and the system turns off.We did no solder the other half of the wires to the sd card and we did solder this pin for the CLK at this placehttps://postimg.org/image/hxdserg0x/.
PLZ Help me I just bought the 3ds for 200 the other day.

Reseat the ribbons.

 

[tekimotop]

.

 

[vb_encryption_vb]

Won't really know till you make a dump.

 

[tekimotop]

.

 

[vb_encryption_vb]

Wait.You are saying that its not a problem if I only get one bluescreen?The top screen is totally black.Can somoone pls confirm if I must get both bluescreens or if its ok if i only get the bottom one ?

Blue screen black screen dont matter. I did confirm for you and the 75 or more 3ds hardmods ive done says so as well. Get the adapter.

 

[tekimotop]

.

 

[vb_encryption_vb]

Wow so you are saying that you hardmoded a 3ds in the past that one of the 2 screens was black?

Correct, could have been due to consoles being bricked though. That's the only time ive had both screens be black. As long as pc recognize the 3ds it dont matter if the screen is purple at that point.

 

[tekimotop]

.

 

[Xenon Hacks]

My console is not bricked at all though.Its just on 11.0 and I want to downgrade.I found this adapter that works on the new 3ds xl .This one to be spesific https://www.skroutz.gr/s/77088/Transcend-Multi-Card-Reader-P8-Black.html
I just want to be sure that I will not buy a clone because I have read a lot of bad things about them.Any tips on that?

https://www.amazon.com/Anker®-Reader-RS-MMC-Support-Warranty/dp/B006T9B6R2

 

[tekimotop]

.

 

[vb_encryption_vb]

My console is not bricked at all though.Its just on 11.0 and I want to downgrade.I found this adapter that works on the new 3ds xl .This one to be spesific https://www.skroutz.gr/s/77088/Transcend-Multi-Card-Reader-P8-Black.html
I just want to be sure that I will not buy a clone because I have read a lot of bad things about them.Any tips on that?

Its normal to have 1 blue screen.

 

[vhaines]

hello there i tried a lot of sd card readers but none of them read my new 3ds xl, hardmod, will this work if i buy this kind of sd card http://www.lazada.com.ph/transcend-...k-with-free-cyber-clean-blue-zip-1126702.html

 

[tekimotop]

.