Homebrew Save Data Manager and Editor for firmware up to 9.9!

[atomicmina]

Have the same issue, running 10.1U on an old 3DSXL. But I can still dump and inject saves just fine (when Tubehax decides to actually load)
This seems to only happen to me for ACNL, so perhaps it's a digital games thing or maybe it's just ACNL or maybe it's a combination of things I don't understand.

Solution:
- Open save manager, move left to ACNL, press 'A' to select.. When the screen glitches out, wait until all the glitchy pixels on screen have stopped moving, then press 'A' to dump. You will see the glitchy pixels move for a bit then stop. When they stop, press X to exit. The screen will go all "Super Mario Crackmania' on the top screen. Shut off the 3DS. Your files are now dumped. Same thing to inject a save, but press 'B' instead of 'A'.
Don't do anything until all pixels have stopped changing,

Glad to know I'm not the only one experiencing this ! I'm using an old 3DS too so maybe that's the problem ? Anyway, yeah, I've noticed the pixels moving but I'm always afraid I'll press X too early and I inject like a half a save file or something hahaha. Thanks for your answer

 

[DesuIsSparta]

Glad to know I'm not the only one experiencing this ! I'm using an old 3DS too so maybe that's the problem ? Anyway, yeah, I've noticed the pixels moving but I'm always afraid I'll press X too early and I inject like a half a save file or something hahaha. Thanks for your answer

I have yet to make a mistake. If you want to be safe, wait 10-15 seconds between actions. It only takes about a second or two to dump, but just for safety..

 

[Phantop]

Have the same issue, running 10.1U on an old 3DSXL. But I can still dump and inject saves just fine (when Tubehax decides to actually load)
This seems to only happen to me for ACNL, so perhaps it's a digital games thing or maybe it's just ACNL or maybe it's a combination of things I don't understand.

Solution:
- Open save manager, move left to ACNL, press 'A' to select.. When the screen glitches out, wait until all the glitchy pixels on screen have stopped moving, then press 'A' to dump. You will see the glitchy pixels move for a bit then stop. When they stop, press X to exit. The screen will go all "Super Mario Crackmania' on the top screen. Shut off the 3DS. Your files are now dumped. Same thing to inject a save, but press 'B' instead of 'A'.
Don't do anything until all pixels have stopped changing,

I'm annoyed that my version of post wasn't answered but I'm still glad I got an answer. Thanks!

 

[xRandomLurker]

I kinda corrupted my Pokemon Rumble World save. I have a 10.1 O3DS and I was using this and Pokemon Rumble World save editor (https://gbatemp.net/threads/pokemon-rumble-world-diamonds-p-tool.386526/) to get more Diamonds. The game is now telling me that the saves corrupted and i have to start again or just not use it. Any ideas what could have gone wrong?

Spoiler: Picture

 

[Misledz]

Maybe it would be nice if Save Data Manager puts the save in a folder according to the gameid, like savedatafiler on emunand does, this way you can dump multiple game saves.

True, although OP hasn't replied to this in ages, infact I don't even know if this thread is alive, the title hasn't changed to support 10.x

 

[BlueOnClues]

I liked the older version . . . . .

 

[lolfailure]

i have seen several people say they fixed it but no details on how. when i select save manager, i am taken to the "could not access savedata archive" screen immediately without ever being prompted to select anything. other people who experienced this what did you do?? i have the latest versions of all files and everything else is working perfectly. 10.1U

 

[nickdos]

I am on 9.9 EU Old
I did the browserhax and then themehax method.
When I select the savemanager app from the main homebrew menu, I never get an option to select a specific game to edit the screen goes straight to:

Get fs:USER handle:0x0
FUSER_Initialize: 0x0
Open archive 0xC920454F
Could not access the savedata archive!

 

[DesuIsSparta]

I am on 9.9 EU Old
I did the browserhax and then themehax method.
When I select the savemanager app from the main homebrew menu, I never get an option to select a specific game to edit the screen goes straight to:

Get fs:USER handle:0x0
FUSER_Initialize: 0x0
Open archive 0xC920454F
Could not access the savedata archive!

I'm going to assume you're using the wrong version of SDM

 

[nickdos]

I'm going to assume you're using the wrong version of SDM

I just downloaded the attached file from the OP. Is that wrong?

Tried all files on the OP nothing worked.

 

[DjoeN]

Don't know if it's already mentioned.

If you use sysnand 9.2 and have an emunand, don't use Save Data Manager (also happens with svdt) in sysnand 9.2, this will corrupt the part on your SD where your emunand is.
It happens when you browse for your game (i still use some game sin sysnand 9.2) and you pass an illegal installed cia game, it will not show it but wil show the last legit game, when exitting and reboot to your sysnand from hbl
then start your CFW, it will end in a balck screen, no way to boot your emunand, putting back an emunand backup will not solve the problem, it corrupts the small hidden part your amunand is on.
The only solution for me was to put back my win32disk image.

 

[kikiyox77]

I have updated my youtube app by accident, and I can't use homebrew anymore. Any solutions as to what I can do?
Is there a way to revert the update of youtube?

 

[VaiCorinthians]

I have updated my youtube app by accident, and I can't use homebrew anymore. Any solutions as to what I can do?
Is there a way to revert the update of youtube?

ALL tubehax is dead!
Use browserhax and later themehax.

 

[Chipman42]

I am on 10.1 Old and I keep getting this message when I launch the Save Manager
Get fs:USER handle : 0x0
FSUSER_Initialize: 0x0
Open Archive : 0xC920454F
Could not access the savedata archive! Press X to
exit.

I stopped using Tubehax when 10.1 came out being cautious of being bricked, I just installed Browserhax last night and have been having nothing but issues with CHMM, the Save Manager and BLARG SNES

 

[JJTapia19]

I am on 10.1 Old and I keep getting this message when I launch the Save Manager
Get fs:USER handle : 0x0
FSUSER_Initialize: 0x0
Open Archive : 0xC920454F
Could not access the savedata archive! Press X to
exit.

I stopped using Tubehax when 10.1 came out being cautious of being bricked, I just installed Browserhax last night and have been having nothing but issues with CHMM, the Save Manager and BLARG SNES

Try this. Sounds like you have an old boot.3dsx

.
Try with mashers homebrew launcher mod.That fixed it for me. A newer boot.3dsx must be required.

 

[Chipman42]

Try this. Sounds like you have an old boot.3dsx

When I installed Browserhax, I downloaded the newest boot.3dsx. I'll try downloading it again

 

[JJTapia19]

When I installed Browserhax, I downloaded the newest boot.3dsx. I'll try downloading it again

Yeah try again and let me know. Also if for some reason you don't want the mod heres the fixed original one
https://smealum.github.io/ninjhax2/boot.3dsx

 

[Chipman42]

When I go to save the boot.3dsx onto my SD, it says the file name is invalid.

Yeah try again and let me know. Also if for some reason you don't want the mod heres the fixed original one
https://smealum.github.io/ninjhax2/boot.3dsx

What do you mean by mod?

 

[JJTapia19]

When I go to save the boot.3dsx onto my SD, it says the file name is invalid.

What do you mean by mod?

Masher's homebrew launcher modified version. Get it here. https://gbatemp.net/threads/release-homebrew-launcher-with-grid-layout.397527/
Replace your boot.3dsx with the new one.

 

[Chipman42]

Masher's homebrew launcher modified version. Get it here. https://gbatemp.net/threads/release-homebrew-launcher-with-grid-layout.397527/
Replace your boot.3dsx with the new one.

Thanks for the help, I'll definitely look into that modified version some other time, I don't feel like downloading it now xD