He's asking about EMUnand, Gateway already supports 9.4 N3DS emunand as far as I know.
He's asking about EMUnand, Gateway already supports 9.4 N3DS emunand as far as I know.
Gateway doesn't support roms on 8.1J EMUnand. He can't run roms so he can't update emunand with a rom.
I can also confirm success with this method...
Before and After...
WOW!! Is it possible for you guide me through this?? I'm willing to pay for it.
I have no knowledge of web server.. Is it impossible to get this done without a personal server? Thanks.
Basically, you need to (FOR 8.1.0-0J TO 9.2.0-20J ONLY!):
1. Set up a webserver to locally host PHP. I used EasyPHP on Windows 8.1: http://www.easyphp.org/easyphp-devserver.php
2. Once you have your webserver running, you need to host 5 main files:
a. GetAccountStatus_response.xml: https://gist.github.com/yifanlu/e0787ca48473cdf992f8
*. You need to change the NusURL value to match the path of your webserver host!
b. GetSystemCommonETicket_response.xml: https://gbatemp.net/threads/guide-upgrading-8-1-0-0j-to-9-2-0-20j.384960/page-2#post-5414650
c. GetSystemTitleHash_response.xml: https://gist.github.com/yifanlu/3a6fab2ea14a2b2f081f
*. You need to change the TitleHash value to match the one in GetSystemUpdate_response.xml: 8564645C8A1B36E6E13F93D6C5348763
d. GetSystemUpdate_response.xml: https://gist.github.com/yifanlu/bdcd22073cb5096942bb
e. update.php: https://gbatemp.net/threads/guide-upgrading-8-1-0-0j-to-9-2-0-20j.384960/#post-5414057
*. You will need to add an elseif statement for the GetSystemCommonETicket case that returns the GetSystemCommonETicket_response.xml file.
3. Once your webserver is all configured, boot up NTR-CFW on your 8.1.0-0J New3DS: https://gbatemp.net/threads/release...gion-free-cfw-on-jp-eu-us-aus-new-3ds.385142/
4. Once you are in the NTR-CFW environment, press X+Y simultaneously to bring up the system menu. Enable the debugger from there.
5. Launch the NTRclient debugger application: https://gbatemp.net/threads/release...st-public-real-time-debugger-for-n3ds.384858/
6. In the NTRclient application, run the following 5 commands:
a. connect('#.#.#.#', 8000)
*. Replace #.#.#.# with the IP address of your New3DS.
b. listprocess()
c. write(0x15E424, tuple(map(ord, "http://hostname/update.php\0")), pid=0x25)
d. write(0x15E0EC, tuple(map(ord, "http://hostname/GetAccountStatus_response.xml\0")), pid=0x25)
e. write(0x15E463, tuple(map(ord, "http://hostname/GetAccountStatus_response.xml\0")), pid=0x25)
*. In all of these, replace hostname with the path to your webserver host!
7. Once you have run all the patching commands, launch System Settings on the New3DS.
*. DO NOT EXIT SYSTEM SETTINGS OR YOU WILL HAVE TO REPERFORM ALL PREVIOUS PATCHING STEPS!!!
8. Perform a system update as normal.
9. When the update is complete, the system should reboot into 9.2.0-20J (with new NTR 2.1 version, the system no longer hangs on reboot!).
2. Once you have your webserver running, you need to host 5 main files:
a. GetAccountStatus_response.xml: https://gist.github.com/yifanlu/e0787ca48473cdf992f8
*. You need to change the NusURL value to match the path of your webserver host!
b. GetSystemCommonETicket_response.xml: https://gbatemp.net/threads/guide-upgrading-8-1-0-0j-to-9-2-0-20j.384960/page-2#post-5414650
c. GetSystemTitleHash_response.xml: https://gist.github.com/yifanlu/3a6fab2ea14a2b2f081f
*. You need to change the TitleHash value to match the one in GetSystemUpdate_response.xml: 8564645C8A1B36E6E13F93D6C5348763
d. GetSystemUpdate_response.xml: https://gist.github.com/yifanlu/bdcd22073cb5096942bb
e. update.php: https://gbatemp.net/threads/guide-upgrading-8-1-0-0j-to-9-2-0-20j.384960/#post-5414057
*. You will need to add an elseif statement for the GetSystemCommonETicket case that returns the GetSystemCommonETicket_response.xml file.
3. Once your webserver is all configured, boot up NTR-CFW on your 8.1.0-0J New3DS: https://gbatemp.net/threads/release...gion-free-cfw-on-jp-eu-us-aus-new-3ds.385142/
4. Once you are in the NTR-CFW environment, press X+Y simultaneously to bring up the system menu. Enable the debugger from there.
5. Launch the NTRclient debugger application: https://gbatemp.net/threads/release...st-public-real-time-debugger-for-n3ds.384858/
6. In the NTRclient application, run the following 5 commands:
a. connect('#.#.#.#', 8000)
*. Replace #.#.#.# with the IP address of your New3DS.
b. listprocess()
c. write(0x15E424, tuple(map(ord, "http://hostname/update.php\0")), pid=0x25)
d. write(0x15E0EC, tuple(map(ord, "http://hostname/GetAccountStatus_response.xml\0")), pid=0x25)
e. write(0x15E463, tuple(map(ord, "http://hostname/GetAccountStatus_response.xml\0")), pid=0x25)
*. In all of these, replace hostname with the path to your webserver host!
7. Once you have run all the patching commands, launch System Settings on the New3DS.
*. DO NOT EXIT SYSTEM SETTINGS OR YOU WILL HAVE TO REPERFORM ALL PREVIOUS PATCHING STEPS!!!
8. Perform a system update as normal.
9. When the update is complete, the system should reboot into 9.2.0-20J (with new NTR 2.1 version, the system no longer hangs on reboot!).
Good luck!
Thanks for posting the steps! It's still really hard to understand.. But I'll try my best.
Can you please clarify this? I believe I have everything set up to this point.
And how would I find the IP address of my 3DS? There's quite a few devices on my LAN.
Like this?
PHP:
if($header == "SOAPAction") {
if($value == "urn:nus.wsapi.broadon.com/GetSystemUpdate") {
fwrite($myfile, "GetSystemUpdate detected\n");
echo file_get_contents("GetSystemUpdate_response.xml");
} elseif ($value == "urn:nus.wsapi.broadon.com/GetSystemTitleHash") {
fwrite($myfile, "GetSystemTitleHash detected\n");
echo file_get_contents("GetSystemTitleHash_response.xml");
} elseif ($value == "urn:nus.wsapi.broadon.com/GetSystemCommonETicket") {
fwrite($myfile, "GetSystemCommonETicket detected\n");
echo file_get_contents("GetSystemCommonETicket_response.xml");
}
}Thanks!
I'm about to update, does this look right?
The 'null' in NTR Debugger looks suspicious to me.
I'm about to update, does this look right?
The 'null' in NTR Debugger looks suspicious to me.
The PHP code snippet given by clock should work fine.
Finding the IP of your 3DS would vary from router to router, but if you look at the table of wireless devices connected to your router, you should be able to match the MAC address of your 3DS to a device in that list (assuming your router also gives the MAC/physical address in the list of connected devices).
'null' messages are normal. Good luck!
Sweet. If the NT debugger disconnects after I get into system settings, is that still ok or is everything patched by then?
This happened when I booted the settings:
Yeah, freaked me out a little too, but also normal. System Settings seems to disconnect network connections on launch.
Well crap. I get an error when trying to update and the 3DS restarts.
Tried twice so far, and I have these two entries in the log:
Tried twice so far, and I have these two entries in the log:
-
-
@
Psionic Roshambo:
Ughh gonna be bored today, class for new job has a lot of networking material and I'm certified in that already... -
-
-
-
@
Psionic Roshambo:
Employee code of conduct videos are awesome!!! Did you know eating the other employees is bad? I didn't know... Lol+1
-
-
-
-
-
-
-
-
-
-
-
@
BigOnYa:
What to do today? Cut grass for 3-4 hours, or just get drunk and play video games... Hmm+1 -
-
-
-
-
@
BigOnYa:
Now what to play, Starfield or Fallout4. And what to drink, beer or Whiskey and Coke. Such tough decisions.
-
-
-
