Hi !
TLDR : Hekate works, any payloads works, HOS doesn’t work and AMS neither.
I’ve searched internet and the few people who got the same issue didn’t post a solution…
So I installed a Picofly on an unpatched V1 (the person wanted a modchip and I don’t have any RCM chip atm)
So I update HOS to FW 17 before starting, I install the chip, I got the NO SD logo so it went fine.
I put all the files on the SD card, boot Hekate, create EMUMMC… the usual stuff.
The issue is when loading fusée.bin, I get the big atmosphere splash for half a second then nothing, black screen, the console is on and I have to press POWER for 20 sec to shut it down.
I tried the option Stock EMMC and I got only a black screen.
I tried bypassing the chip with vol+ and vol- with no luck, same issue, the console is powered on with a black screen…
The chip is working fine and the glitch takes less than a second before turning green.
I searched a bit on Hekate, and found the fuses count are good, and the battery calibration is off, it shows 1000mAh in orange with a warning sign and Init, I doubt the issue comes from here as everything else shows up, so the battery should be fine.
Here is what I did so far :
-tried rebuilding the eMMC via eMMCHacGen using the Such meme Many skills guide and went all the way to system wipe, no luck.
-Tried removing the chip and putting back the eMMC boards where it belongs, nothing. Worth noting my stupid ass tried this only after the system wipe… So the eMMC was already altered…
What I didn’t do yet :
-Restoring full NAND with Hekate
-Trying another battery
If anyone have a suggestion on what to try, any help appreciated !
TLDR : Hekate works, any payloads works, HOS doesn’t work and AMS neither.
I’ve searched internet and the few people who got the same issue didn’t post a solution…
So I installed a Picofly on an unpatched V1 (the person wanted a modchip and I don’t have any RCM chip atm)
So I update HOS to FW 17 before starting, I install the chip, I got the NO SD logo so it went fine.
I put all the files on the SD card, boot Hekate, create EMUMMC… the usual stuff.
The issue is when loading fusée.bin, I get the big atmosphere splash for half a second then nothing, black screen, the console is on and I have to press POWER for 20 sec to shut it down.
I tried the option Stock EMMC and I got only a black screen.
I tried bypassing the chip with vol+ and vol- with no luck, same issue, the console is powered on with a black screen…
The chip is working fine and the glitch takes less than a second before turning green.
I searched a bit on Hekate, and found the fuses count are good, and the battery calibration is off, it shows 1000mAh in orange with a warning sign and Init, I doubt the issue comes from here as everything else shows up, so the battery should be fine.
Here is what I did so far :
-tried rebuilding the eMMC via eMMCHacGen using the Such meme Many skills guide and went all the way to system wipe, no luck.
-Tried removing the chip and putting back the eMMC boards where it belongs, nothing. Worth noting my stupid ass tried this only after the system wipe… So the eMMC was already altered…
What I didn’t do yet :
-Restoring full NAND with Hekate
-Trying another battery
If anyone have a suggestion on what to try, any help appreciated !