Generally speaking, 1.3 should be stable. A critical bug was fixed in this version which was causing all of the version upgrade issues everyone has been having.No dice. Hopefully 0.9 and higher will be more stable in the future.
I can confirm that downgrading to 0.9 before upgrading to 1.3 fixes the black screen issue.
I will give it a shot jerbear64!! But just trying to go about it the best way I can.Generally speaking, 1.3 should be stable. A critical bug was fixed in this version which was causing all of the version upgrade issues everyone has been having.
Thanks for the tip and its worked for me.I had to downgrade from 1.1 to 0.9 for update to 1.3
Why you must hardmod to install unlaunch? 0.8 installer worked perfectly with my DSi XL. (BTW 0.9 worked too)If you plan to use this exploit, currently only the "manual" method works, and you also need to make sure that the launcher .tmd and .app files are both Read Only, otherwise you will brick your system when entering Data Managment, DSi Shop or 3DS Transfer Tool. When the Install Now button works, note that ugopwn and 4swordshax CANNOT be used to install it, as they use the wrong type of payload (minitwlpayload)
Along with the "drama" in the Switch hacking scene, the DSi finally sees a Public Bootcode Exploit. The exploit is called Unlaunch and is currently in very early stages. It is recommended that if you try this exploit that you have a hard mod in case you brick.
To install this exploit,all you need is a DSi, a DSiWare exploit (with sd/mmc access) and the installer.you need to dump and decrypt your nand. Append the Unlaunch.dsi file to the end of the Launcher tmd file, and make sure its read only along with the .app file, encrypt, then re-flash. Detailed instructions can be found when booting the unlaunch.dsi file (use no$gba for ease)
For more information, refer to the link below.
https://problemkaputt.de/gba.htm
Why you must hardmod to install unlaunch? 0.8 installer worked perfectly with my DSi XL. (BTW 0.9 worked too)
Going away from the discussion here, if anyone wants to update the OP, please PM an updated version to me and I will make the change.
With all the updates to Unlaunch, and this being the main thread on it, it should probably have more information in it. However, I haven't been in the DSi Scene enough to know what to write. So yeah, if you have any changes you think I should make then PM them to me.
Use 0.8 version. It's the most stable oneI've installed Unlaunch 1.3 (last stable version) and now can't properly boot into the default dsi launcher (without bootcode.dsi or with A hotkey). It just freezes on the Unlaunch splash screen 9 out of 10 times. If I repeat turning console off and turning it on again, it will eventually boot but that's tedious. bootcode.dsi from sd card always boots fine tho. Something I can do to fix this?
Device is DSi LL 1.4J
Use 0.8 version. It's the most stable one
Looks like the 1.3 is not that stable like 0.8.Yeah, I first tried "download unlaunch.dsi v1.3 (OKAY - tested, seems to be stable)" and it doesn't boot past no$ annoying choice of pictures.
Fortunately I could rename the 0.8 installer to bootcode.dsi and installed it over the top & then it boots.
Yup! I added an unlaunch installer and it sets the read only flags for both the tmd and the launcher
Edit:
If you wanna take a look, I'll leave the link to the source here:
https://github.com/ThisIsDaAccount/TempNand
https://github.com/ThisIsDaAccount/NandInAJar
TempNand is actually a GUI for the second repo linked, NandInAJar, which actually does all of the work besides handling exceptions and taking user input.
It's all made in java, so that's why it's a pc side tool and not a console side tool
Unlaunch works fine on every firmware from 1.4, probably it'll work on older ones too, so there's no need to update/downgrade the firmwareHi there. I own a DSi XL which has 1.4.4 (U). Should I update to 1.4.5 before I start installing anything? Thanks in advance.
Okay. Thanks!Unlaunch works fine on every firmware from 1.4, probably it'll work on older ones too, so there's no need to update/downgrade the firmware
Yeah, basically almost all the updates from 1.4 only added additional filters, for example up until 1.4.3 you could copy unsigned saves from the SD, and the 1.4.4 removed only this possibilityOkay. Thanks!
I'm assuming that both 1.4.4 and 1.4.5 are identical with the exception that 1.4.5 blocks some flashcarts. Right?
Perfectly installed 0.9 on my XL with 1.4.3Hi there. I own a DSi XL which has 1.4.4 (U). Should I update to 1.4.5 before I start installing anything? Thanks in advance.