Tutorial  Updated

Downgrade 3DS with sysUpdater

EDIT: This tutorial maybe outdated, technically it still work but please use Plailect's Guide, it covers even more things:



https://plailect.github.io/Guide/



EDIT: MANY USERS ALREADY BRICKED THEIR DEVICE, SO BE ABSOLUTELY SURE WHAT TO DO, THIS IS VERY DANGEROUS. WITHOUT A HARDMOD AND A NAND BACKUP A BRICK IS PERMANENT!!!


I'm doing this tutorial quickly only because we don't want to answer all "How to downgrade" question-threads seperately.

All credits belongs to TuxSH, Jason Dellaluce, Steveice10 (and some other, don't know who else right know)


KEEP IN MIND: BRICKS CAN HAPPEN AND HAPPENED TO SOME USERS!!! NO WARRANTY FOR A SUCCESSFUL DOWNGRADE!

1. You need a 3DS with any hax installed, if you have non, use Browserhax (http://yls8.mtheall.com/3dsbrowserhax.php) by yellows8 or menuhax. And of course, at least boot.3dsx in SD card root.

2. Download sysupdater and, unzip it and copy it to sd card:/3ds/ (if it does not exist, just create it...)
Mirror: https://mega.nz/#!JE1R3RhQ!MqY_OTyYrVM_DMOltiDfaZvTGZ8gCoUcATmOYEimM-U

3. You will need a complete firmware package of your desired Firmware. I recommend 9.2.0-20E/U/J.
Where do you get this package you ask? Well, Nintendo deleted all titles from their server older than 9.9.0-X, so you have to google it. I will help you to google it: http://bfy.tw/3Xqo

Cha0s Em3rald made MD5 checksum's for 9.2.0-20E/U/J N3ds/O3DS, check archive's checksum before using it! https://gbatemp.net/threads/md5-checksums-crc-for-all-9-2-update-packs.408114/

PLEASE NOTE: JP N3DS Users, you'll need to remove the 000400102002CA00 title from the download package in order to not get bricked! Do NOT install it!

4. Copy all firmware title .cia on SD Card:/update/

5. Remove smea's DNS, in case of unsuccessfull downgrade, you need in that case to start 3DS in Recovery mode to update and repair your system.

6. Start 3DS and go into Homebrewlauncher.

7. Start sysupdater

8. Wait for application to be ready. (ca. 1-5min)

9. Press Y to downgrade

10. Wait and pray until "Succeed. Reboot in 10 sec"

11. Done - Downgrade is (hopefully) complete!

I recommend to create an EmuNAND after downgrading and using a cfw Loader, like cakesFW or rxTools.


Q: Help! I have a blackscreen after the reboot!!!
A: Unplug SD Card, reboot. I think some SD data can't aren't compatible with downgraded titles, so delete your current "Nintendo 3DS" folder on SD card, if needed.

If it still doesn't boot, try to get into recovery mode, by pressing Power-Button to boot while holding L+R+Up+A, update and try again.

Q: sysupdater crashes/won't start/freeze.
A: (Hold L+R+DpadDown+B to return to Homebrew Launcher, then) start/reboot again. Some users needed over 30 attempts.
Try another hax; I used menuhax to start ctr boot manager.
TuxSH wrote that it can raise succeed boot of sysupdater if you started 3DS-FTP before and return with L+R+Down+B, then start sysUpdater

Alternative Way:
1. Backup/delete your boot.3dsx in sd root
2. Copy "sysUpdater.3dsx" to root and rename it into "boot.3dsx"
3. Plug SD card in and start hax (recommended: Menuhax)
4. *hax will load directly sysUpdater.

Q: What firmwares can be downgraded?
A: All firmwares up to newesest (10.3) can be downgraded. New 3DS is not confirmed because of no testing by TuxSH, but many users already tried and successfully downgraded their N3DS.

Q: I have an 2DS, which Firmware do I need?
A: Firmware for Old 3DS. MSET for 3DS can wants to move 3d slider after formating - you need to install only Firmware/MSET that was supported by 2DS, so NO 4.5! O3DS 9.2.0-20E should be fine, but not confirmed.

Q: It won't reboot after the finished downgrade.
A: What I did: Waited 10 minutes, then I powered it off. Downgrade suceed. You don't have another choice anyway.
 
Last edited by artur3004,

nooby89

A normal member with a stupid alias
Member
Joined
Aug 18, 2015
Messages
1,625
Trophies
0
XP
648
Country
Canada
Ok but... you know when you downgrade your datas is saved...
So if you want you can format but this will not help you to downgrade you know.
 

gnmmarechal

Well-Known Member
Member
GBAtemp Patron
Joined
Jul 13, 2014
Messages
6,039
Trophies
2
Age
25
Location
https://gs2012.xyz
Website
gs2012.xyz
XP
5,990
Country
Portugal
I pressed B to downgrade an now it has been stuck on the same screen for at least 20 minutes..

Whats going on? Am I screwed? I'm scared to just go ahead and hold the power button down.

I should also mention that at the top it says "ERROR : Can't force threads to core 1."
That means the hack failed. It's safe to turn off.
 
  • Like
Reactions: nooby89

gnmmarechal

Well-Known Member
Member
GBAtemp Patron
Joined
Jul 13, 2014
Messages
6,039
Trophies
2
Age
25
Location
https://gs2012.xyz
Website
gs2012.xyz
XP
5,990
Country
Portugal
Damn. No, both of my 3DS are in 11.0.0...

Why can't you downgrade? And is there REALLY nothing I can do at this point?
Software downgrades for 11.0 will never come without an ARM9 kernel exploit (fyi, the latest firmware with one is 9.2.0). 11.0 introduced a minimum title version list, so even if we have a new ARM11 kernel exploit (like memchunkhax2 and svchax/memchunkhax2.1 for 9.3-10.7), we wouldn't be able to downgrade due to that title list. To bypass this, an ARM9 kernel exploit is needed, which would make it possible to run CFW on 11.0 without any need for downgrade either. 11.0 would become the new 9.2, and the only use for downgrading would be for Arm9LoaderHax and the OTP.bin.
 
  • Like
Reactions: nooby89

gnmmarechal

Well-Known Member
Member
GBAtemp Patron
Joined
Jul 13, 2014
Messages
6,039
Trophies
2
Age
25
Location
https://gs2012.xyz
Website
gs2012.xyz
XP
5,990
Country
Portugal
I heard there is a possibility to downgrade on 11.0 if you have an other hacked system. How so?
Same downgrade (known plaintext attack) as hardmod. Requires fieldrunners.

Sent from my Motorola DynaTAC 8000x using Tapatalk
 

fiese_nase

Well-Known Member
Newcomer
Joined
Oct 21, 2015
Messages
93
Trophies
0
Age
31
XP
170
Country
Gambia, The
Hello. Can I downgrade to a other region? i have a old 3ds with the firmware 11.0.0-33U and i need a E firmware. greetz
 

Decorations

Well-Known Member
Member
Joined
Oct 2, 2016
Messages
355
Trophies
0
Age
27
Location
Heaven
XP
169
Country
United States
keep getting this error message as well :

title exception:
main.cpp:154: Result: 0xD900182f
Failed to get CIA file info!
Did u figure out what to do?

Any idea ???

--------------------- MERGED ---------------------------

Im getting this error as well. How do I fix it?
Did u figure it out ?

--------------------- MERGED ---------------------------

I want too die I keep getting error code main.cpp154
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    SylverReZ @ SylverReZ: @OctoAori20, Cool. Same here.