Hardware Switch lite Speaker mod

[Xandroz]

Hey guys, so i got a new lite and the speakers are so low, i was thinking of adding 2 more and wireing them to the current one.
Is that possible, i see the housing of the speaker can be modded to add one more each side, i wanna make the sound higher basically when playing portable.

you think it will be a success or if there is a 3d model and i print something similar that holds 4 speakers instead of 2. I do want to crank thr volume a bit

 

[Shadow#1]

Hey guys, so i got a new lite and the speakers are so low, i was thinking of adding 2 more and wireing them to the current one.
Is that possible, i see the housing of the speaker can be modded to add one more each side, i wanna make the sound higher basically when playing portable.

you think it will be a success or if there is a 3d model and i print something similar that holds 4 speakers instead of 2. I do want to crank thr volume a bit

U will need a amp also

 

[Xandroz]

Ah so just wiring it to the other speaker wont increase it even by a bit.
Its just soo low, lower than the og switch

 

[Shadow#1]

Ah so just wiring it to the other speaker wont increase it even by a bit.
Its just soo low, lower than the og switch

I'd go BT earbuds and

https://www.amazon.com/dp/B07YB5SMGF/ref=cm_sw_r_cp_apa_i_ZijqFbS3QWSQX

 

[Xandroz]

Can i at least upgrade the 2 shitty speakers, i got 2 from the og switch, i think i will install these hoping for better sound.
I dont usually use earbuds
But if it resorted to that then no other option i guess
I was just resarching my options

 

[CurlyFries27]

Can i at least upgrade the 2 shitty speakers, i got 2 from the og switch, i think i will install these hoping for better sound.
I dont usually use earbuds
But if it resorted to that then no other option i guess
I was just resarching my options

Did you ever figure out a good alternative? I got a modded switch lite and have had the same issue I would use it SO much more if it was just like 50% louder

 

[masagrator]

You can use MasterVolume to go above 100%

https://github.com/averne/MasterVolume

I am using 300% and in V2 it works fine as long as you have system volume set to max.

 

[whisky9]

You can use MasterVolume to go above 100%

https://github.com/averne/MasterVolume

I am using 300% and in V2 it works fine as long as you have system volume set to max.

Forcing the speakers to work beyond its wattage for a long time will lead to tearing of the rubber surround.