Strange Fan Control Issue

bennieboy777

Member
OP
Newcomer
Joined
Sep 4, 2023
Messages
7
Trophies
0
Age
31
XP
200
Country
United States
This is a long story so I'll try to shorten it as much as I can. I found a CECHL-01 in great condition, but I still decided to open it up and give everything a good cleaning. I also used the time inside to make sure everything was where it should be, etc. No issues at all until it was put back together. The fan won't spin. Here's what I've done to try to remedy this issue:

1. New fan (Many times actually. Tried two fans of the 15 blade variety and two fans of the 19 blade variety.) When the ps3 is turned on, the fan "jolts" forward slightly, almost as if it was briefly connected to power and then disconnected.

2. Bought a fifth fan and wired it up to an external power supply. I connected the grey and red wires together on the fan side, using that as my overall "red" in a two-wire fan layout. and black to ground. Worked for a while but the fan ended up dying. Confirmed it was the fan dead not the power supply by attaching the power supply to a pc case fan, and it spun.

3. Checked the voltages where the fan header is on the motherboard, 12V gets 12V, Ground is connected to ground. I'm not entirely sure how to check the grey connector, since that's for PWM fan control correct?

4. Post this here, hoping someone can help me before my sixth (and probably final) fan arrives in a few days. The ps3 is my favorite console, and the CECHL is my favorite of the phat models, so I would do anything to keep this thing alive.

Please post anything that might help me with this issue! I can't afford to keep buying fans, so I really want the solution for this next fan to be permanent!

Thank you in advance!

Edit: Afterthought right when I posted this: Is there any possibility that it could be firmware? It is on CFW Evilnat 4.90, previously rebug 4.84
 

bennieboy777

Member
OP
Newcomer
Joined
Sep 4, 2023
Messages
7
Trophies
0
Age
31
XP
200
Country
United States
I haven't tried the fan test yet. Good suggestions.

Currently I don't have a fan that isn't dead to test it on...so I will keep this in mind when the new fan arrives.

If the fan works during the fan test and doesn't normally, then I guess it would be safe to assume that the problem is custom firmware related? I've checked everything I reasonably can in terms of hardware on the board.

Edit: I've reverted the system back to 4.90 stock just in case the custom firmware is the cause of the issue. I used a few small flat fans to try to keep it cool and it barely made it through the update before it overheated. So that also rules out the possibility of it being the temperature sensing circuit...

Does anyone have any other suggestions?
 
Last edited by bennieboy777,

bennieboy777

Member
OP
Newcomer
Joined
Sep 4, 2023
Messages
7
Trophies
0
Age
31
XP
200
Country
United States
I reverted the firmware to stock 4.90. I formatted the hard drive and made sure there were no traces of any software issue.

I ended up using a potentiometer, with a usb 5v power source being the positive and negative, and the "output" of the pot being the signal of the grey wire. It works perfectly so far. As per the more detailed findings in the post below, I may have to find a more elegant solution soon, before I lose another fan. Just wanted to update this in case someone else had the same issue..

http://eikimartinson.com/archives/104-Driving-a-Playstation-3-Fan.html
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • K3Nv2 @ K3Nv2:
    It must be the 1st already
  • BakerMan @ BakerMan:
    1st of what?
  • BakerMan @ BakerMan:
    may?
  • K3Nv2 @ K3Nv2:
    Oh yeah it's in September
  • Xdqwerty @ Xdqwerty:
    @BakerMan, yea i think its different
  • BakerMan @ BakerMan:
    ok, because here it's in september, right before the fuckin school year starts
  • Xdqwerty @ Xdqwerty:
    good night
  • BakerMan @ BakerMan:
    as to you
  • K3Nv2 @ K3Nv2:
    How do you know if the night will be good when you're asleep
  • BakerMan @ BakerMan:
    because i didn't say i was asleep
  • BakerMan @ BakerMan:
    i said i was sleeping...
  • BakerMan @ BakerMan:
    sleeping with uremum
  • K3Nv2 @ K3Nv2:
    Even my mum slept on that uremum
  • TwoSpikedHands @ TwoSpikedHands:
    yall im torn... ive been hacking away at tales of phantasia GBA (the USA version) and have so many documents of reverse engineering i've done
  • TwoSpikedHands @ TwoSpikedHands:
    I just found out that the EU version is better in literally every way, better sound quality, better lighting, and there's even a patch someone made to make the text look nicer
  • TwoSpikedHands @ TwoSpikedHands:
    Do I restart now using what i've learned on the EU version since it's a better overall experience? or do I continue with the US version since that is what ive been using, and if someone decides to play my hack, it would most likely be that version?
  • Sicklyboy @ Sicklyboy:
    @TwoSpikedHands, I'll preface this with the fact that I know nothing about the game, but, I think it depends on what your goals are. Are you trying to make a definitive version of the game? You may want to refocus your efforts on the EU version then. Or, are you trying to make a better US version? In which case, the only way to make a better US version is to keep on plugging away at that one ;)
  • Sicklyboy @ Sicklyboy:
    I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version
  • TwoSpikedHands @ TwoSpikedHands:
    @Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it!
  • TwoSpikedHands @ TwoSpikedHands:
    I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
  • TwoSpikedHands @ TwoSpikedHands:
    I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
  • TwoSpikedHands @ TwoSpikedHands:
    I appreciate the insight!
    TwoSpikedHands @ TwoSpikedHands: I appreciate the insight!