Tutorial  Updated

RXtools CFW coldboot full installation guide for New3DS, from Browserhax & Homemenuhax to Rxtools

This tutorial will allow you to install Browserhax then HomemenuHAX & finally launch a Rxtools CFW from coldboot.
To make a full working tutorial, I tried to gather all informations possible around GBAtemp.
This tutorial works for me, i own a New3DSXL EUR in 9.0 firmware, it sould work until 9.2​


Video tutorial made by @Ericzander

Requirement :
- A 3DS, 2DS, New3DS between 9.0 and 9.2
- Use a theme at leat once
optional :
- Emunand with a Manager installed on it
- blank N3DS/3DS & Blank SDCard


BrowserHAX

1) Download Smea’s starter pack: #LINK and extract the files on your SDcard.
1.1) Download the modified MenuHAX : #LINK , put in SDcard/3DS & overwrite.
2) If you have never use a theme on your 3DS, go into the theme setting & wait for the preparation to finish then return in home menu.
3) 1st you have to turn off the Wi-Fi, next open the 3DS camera by pressing L & R at home screen, touch the QR icon at bottom-left of the bottom screen and scan the QR CODE :
3dsbrowserhax_auto_qrcode.png

then open the internet browser when the message appear.
4) The connection will fail since there is no internet, press home and activate the Wi-FI. Launch again the internet browser and wait until the Homebrew Launcher is launched. The bottom will flash into different colors, yellow, gray, blue & red.
For O3DS user : When you launch the internet browser you have zoom-in several times then go in the upper-left. You will see a slide bar, you have to click a the end of the bar. You may have to retry if it doesn't work, you also try to wait 20 seconds before clicking & hold the A button when you click on it. IT CAN BE REALLY HARD TO GET INTO HBL !!!!
5) Once you are in the Homebrew Launcher browse through the homebrews and select MenuHAX 2.0.[/code]

MenuHAX 2.0 BY YELLOWS8 & EDITED BY legofan623 (READ ALL FIRST !!!)

6a) Now that you are are in MenuHax manager, select “Install” and MenuHax will be installed. Press A to go back at select screen & quit if you don’t need anything else.
6b) You can configure the button to use to boot MenuHax, select “Configure/check haxx trigger button” & choose the option that you want to use.
- Type1, Boot MenuHAX with selected setting
- Type2, Boot Sysnand with selected setting
- Type 0 is default, L to boot MenuHAX

Exemple :
- Autoboot MenuHAX type1, select type 1, touch the bottom screen.
MenuHAX will autoboot when the 3DS is turned On & if any button is hold at boot the 3DS will boot into Sysnand.
- Autoboot MenuHAX type2, select type 2, hold specific button or combo button then touch bottom screen. HomeHax will autoboot, if you hold your specific button or combo button the 3DS will boot into Sysnand.
- Non AutoBoot MenuHax, select type 1 & hold specific button then touch bottom screen if no button is hold, Sysnand will boot if specific or combo button is hold MenuHAX will boot.

6c) You can change the boot screen image by choosing “configure MenuHAX boot logo”.
You will a 800x240 (3D work, so non 3DS logo, use twice the same picture (400x240)) png file named “imagedisplay” & put in SDcard/3DS/MenuHAX_manager then select “configure MenuHAX boot logo”
6d) If you want a custom theme on your sysnand with MenuHAX, put the body_lz.bin and BG.CWAV into SDcard/3DS/MenuHAX_manager & choose “Install custom theme” then select “install” for install MenuHAX
6e) If you want a basic theme on your sysnand with choose “Setup a basic color theme” then select “install” for install MenuHAX

CFW - RXTOOLS

This custom firmware will allows you run .CIA.

1) Rename the boot.3DSX in your SDcard into bootHBL.3DSX
2) Download Rxtools boot.3DSX (updated) :
TYPE1 : https://gbatemp.net/attachments/rxtools-rar.26153/
TYPE2 : http://www.mediafire.com/download/ydvv3aa3mk1kuy7/rxtools.3dsx
Use Type1, if you have a low boot rate, try Type2. If it's still not working try CTRbootmanager
3) Put the Rxtools.3DSX of the extracted zip in the 3DS SDcard root
3.1) Rename the Rxtools.3dsx to boot.3dsx
4) Download
- Rxtools older release : https://mega.nz/#!KQ1HVDLZ!TJhiM4zQlknFSqdkDDf8oGMHaNod6-WbR_ggznC8b3c
- Rxtools nightly build (unstable use older release if rxtools does not work correctly): https://lavanoid.github.io/ or https://www.dropbox.com/sh/blmecish9rb1r87/AACOS5s8u0xucXy59vZk6i1pa?dl=0 (last one)
5) Extract rxtools folder from Rxtools archive to sdcard root.

1) Rename the boot.3dsx into boot_hb.3dsx
2) Download Rxtools nightly build : here or on dropbox
3) Extract rxtools folder from Rxtools archive to sdcard root.
4) Download : CTRBootManager
5) copy the two files inside the archive to your SDcard root

FOR NEW3DS USER :
6) Download Reinand 2.1 CFW
7) In Reinand archive find firmware.bin (in rei folder) the MD5 must be 006559E2567DC7DF6C0F1AF17EDD9CE8
7.1) extract it to rxtools/data (you may have to create it)
7.2) rename the firmware.bin into 0004013820000002orig.bin for old release of RXTools or 0004013820000002.bin for latest release of RXTools.
8) Put back SDcard to the N3DS
9) Power on your New3DS with your homemenuHax method (L or not)
it should boot Rxtools and Emunand.

FOR O3DS, 2DS USER :
older release :
DL link : https://mega.nz/#!KQ1HVDLZ!TJhiM4zQlknFSqdkDDf8oGMHaNod6-WbR_ggznC8b3c
6) Find the firmware.bin ont the internet, the MD5 MUST be A9DCD99A360E8629810F8ED08403D746
7) Put the Firmware.bin in Rxtools/sys
8) Put back SDcard to the O3DS
9) Power on your New3DS with your homemenuHax method (L or not)
10) For the first boot you will see the installation suite, wait until the 6 square are full.

newer release, you will need Python installed on your computer :
6) use the "cdn_frm" file in the "tools" directory of the rxtools to generate a folder named "firm"
7) Put the folder in rxtools folder
8) Put back SDcard to the O3DS
9) Power on your New3DS with your homemenuHax
10) For the first boot you will see the installation suite, wait until the 6 square are full.
it should boot to emunand automatically

You can use other CFW if you don't like Rxtools
For CakesFW
CakesFW thread : https://gbatemp.net/threads/release-cakesfw.391200/
CakesFW boot.3DSX : https://www.dropbox.com/s/eigz92hojmnelrs/CakeBrah.zip?dl=1
Take the Cakes.3DSX , rename it Boot.3DSX & put in SDcard root

For Reinand
Reinand thread : http://gbatemp.net/threads/source-release-reinand-n3ds-cfw.394309/
Reinand boot.3DSX : https://mega.nz/#!dp4knbDT!TDKIFrEbbJG2g1R4m7b9TC_JE63Fl7BTS0aKdYnALsw
Take the Reinand.3DSX , rename it Boot.3DSX & put in SDcard root

Install a CIA manager : O3D, 2DS ONLY & Unlinked NAND ONLY ! (for the moment)
- boot your 3DS
- Hold L at debug screen toget into Rxtools menu
- go to advanced tab (press right)
- Select "Install FBI" & choose "emuNAND" by press the Y button
- Press the B button, a message should appear.
- Keep in mind the region of your 3DS & number of the line "Version of TMD : XXXX"
- Power off your 3DS and put your SDcard in your computer
- In the rxtools archive of this guide or any nigthly go to Release/Tools/fbi_injection/Your 3DS Region/The version number of TMD and copy the 2 files at the root of your SDcard.
- Put Back your SdCard into you 3DS boot to RXtools menu
- Go to Advanced > install FBI > choose Emunand & it should install FBI on your Emunand
- Keep the files by pressing B on the follow screen.
- Boot emunand and launch the safety app (yellow triangle)
- it should launch FBI
- Instal either big blue menu or any of your CIA.

More informations :

- if you have trouble to get into emunand after boot Rxtools follw this order of installation :
- Format SDcard
- create emunand : put launcher.dat & use the web browser to get gateway menu, select format
- unlink emunand : go to Settings > remove your SDcard from 3DS > orange icon (bottom-right) > format
- activate theme on sysnand : put back sdcard, use a theme
- run browserhax : read guide
- install themehax : read guide
- install rxtools : read guide
- launch rxtools : read guide
- update emunand in rxtools : go to setting check that there is RX-E before firmware, update in settings
- reboot

- If want you want use differents Boot.3DSX at the same time, maybe a CFW and Homebrew Launcher, you can install Ctrbootmanager. It allows to choose which boot.3DSX or any files to boot when you switch on your 3S with HomemenuHAX.
Link : http://gbatemp.net/threads/ctrbootmanager-3ds-boot-manager-loader-homemenuhax.398383/
Since ctrBootManager boots rxTools directly from code.bin, it is working very nicely as a replacement for the rxTools boot.3dsx. Anyone having problems should give that a try. And if you want your boot time to be fast as possible, change the timeout to 0 in boot.cfg, and if you ever need to boot into the menu, you can just hold select.
- If 3D is broken just close your 3DS and open it should fix the 3D.
- If you want to boot in sysnand with homemenuhax autoboot just hold any button at boot.

- If you have a black screen tell in the comment what is the last thing that appear on your screens
- if nothing work i suggest you to format your SDCard & retry every step of this guide, do not skip any of them, some old files on your sdcard may prevent the good behavior of this guide.
 
Last edited by ChrisN8,

Link2999

Well-Known Member
Newcomer
Joined
May 14, 2007
Messages
84
Trophies
1
XP
243
Country
United States
So for whatever reason, my system would flat out boot the rxTool's .3dx. Spent a good 4-5 hours trying to figure it out before finally giving up and trying the alternative method of using ctrbootmanager, which worked right away for me. Set the timeout to 0 and it boots just as quick as if it were booting from the .3dx, and hold down select to choose to boot into the HBLauncher as an added bonus. Also lets me use Yellow8's cia to boot the manager by holding down select on load.
I was able to get the .3dx to load once, but it ended up crashing on me and then was unable to get it working again. Save yourself some time and use bootmanager if it isn't working for you.
 

Retro_Mod_Gamer

Niche List Enthusiast
Member
Joined
Nov 3, 2015
Messages
167
Trophies
0
Age
40
XP
879
Country
Canada
This thread is huge, when I set up coldboot with no buttons pressed, RXtools does this loop where it tries to relaunch itself automatically after launching itself.

Any help?
 
Last edited by Retro_Mod_Gamer,

NickMayCry

Member
Newcomer
Joined
Mar 15, 2016
Messages
8
Trophies
0
Age
31
XP
84
Country
United States
So everything works, but now whenever I do the cold boot it installs the RXtools files again. How do I stop this from happening?
 

DaftMink

Well-Known Member
Member
Joined
Mar 19, 2015
Messages
126
Trophies
0
Age
33
XP
166
Country
United States
Just want to say thanks for the guide.
Setup RxTools as a 2nd easy way into EmuNand as I'm always misplacing my gateway card.

It's either this guide or the confusing 3DSCFWKIT that requires you install every home brew application available.
Really dislike guides which include bonus software not vital to the task.
 

solveig

Active Member
Newcomer
Joined
Oct 4, 2014
Messages
32
Trophies
0
Age
31
XP
791
Country
Serbia, Republic of
sysnand 9.2, GW emunand 11.0, emunand boots from DS settings (MSET or something?), unlinked.
problem is, my n3ds is stuck on a wierd player-like screen (bottom) and a little theme-like launching blue thing (up) after i try to launch homemenuhax.
tips?..
 
Last edited by solveig,

ChrisN8

Well-Known Member
OP
Member
Joined
May 13, 2015
Messages
332
Trophies
0
Age
39
XP
265
Country
France
sysnand 9.2, GW emunand 11.0, emunand boots from DS settings (MSET or something?), unlinked.
problem is, my n3ds is stuck on a wierd player-like screen (bottom) and a little theme-like launching blue thing (up) after i try to launch homemenuhax.
tips?..
You should try using luma3ds instead of Rxtools, because now its kinda outdated.
 
  • Like
Reactions: solveig

solveig

Active Member
Newcomer
Joined
Oct 4, 2014
Messages
32
Trophies
0
Age
31
XP
791
Country
Serbia, Republic of
You should try using luma3ds instead of Rxtools, because now its kinda outdated.
ugh, im sorry, im noob at this. could you please tell me what to do after i copy all of the files to SD? how do i BOOT it? x) do i need to copy starter pack on the SD anyway for it to work? ughhhhh.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • BigOnYa @ BigOnYa:
    I wonder how many Broncos fans cellphones Kelsy's brother will smash today.
  • DragonMals @ DragonMals:
    he's
  • Faust03 @ Faust03:
    twitter is a very toxic website
  • K3Nv2 @ K3Nv2:
    Nuh uh
  • DragonMals @ DragonMals:
    An underrated opinion: While Bluesky as a platform is better than Twitter, Bluesky's userbase won't be better than Twitter as people are saying because everyone from the non-bootleg site are moving to the bootleg one expecting for themselves to change with their attitude, but that never works like that.
  • DragonMals @ DragonMals:
    I will say though: Bluesky as a micro-blogging site? Needs a bit more oomph and I would officially like it better than Twiter. Can't even post gifs on that site, like what the fuck?
  • K3Nv2 @ K3Nv2:
    Diarrhea is toxic
  • BigOnYa @ BigOnYa:
    Can you post milfs though?
  • K3Nv2 @ K3Nv2:
    Gilfs
    +3
  • BigOnYa @ BigOnYa:
    Kilfs. (Ken knows)
  • K3Nv2 @ K3Nv2:
    Gay
    +1
  • NinStar @ NinStar:
    fake and gay
    +1
  • K3Nv2 @ K3Nv2:
    Fake news is hot
  • realtimesave @ realtimesave:
    hey guyz
    +2
  • SylverReZ @ SylverReZ:
    @realtimesave, I'm here. Why?
  • SylverReZ @ SylverReZ:
    Have you found anywhere else to sell your Switch OLED?
  • SylverReZ @ SylverReZ:
    Ello :)
    +1
  • Xdqwerty @ Xdqwerty:
    @DragonMals, Yeah one is gonna have the same attitude in any site no matter what
  • Xdqwerty @ Xdqwerty:
    @SylverReZ, how are you?
  • SylverReZ @ SylverReZ:
    I'm okay.
  • BigOnYa @ BigOnYa:
    I'll buy it, full price, meet me in the dark alley behind that closed blockbuster.
    BigOnYa @ BigOnYa: I'll buy it, full price, meet me in the dark alley behind that closed blockbuster.