Hi all,
Would anyone happen to have any info on how the LCD is powered by the Switch.
I'm aware IC 8316 to the left of the LCD connector provides the 5v/-5v, but I'm also reading -7v on another LCD pin and I can't figure out where it's coming from.
Long story short, I've replaced the M92T36 and MAX77621 to get the unit to turn on, but I'm getting no image -only backlight. I can hear sounds, so I'm sure it's running, but it's not displaying anything.
IC 8316 is not outputting the 5v/-5v despite receiving the 1.8v signal, so it may be the culprit, but it would be nice to know where else the LCD gets its power from.
THanks for your help!
Would anyone happen to have any info on how the LCD is powered by the Switch.
I'm aware IC 8316 to the left of the LCD connector provides the 5v/-5v, but I'm also reading -7v on another LCD pin and I can't figure out where it's coming from.
Long story short, I've replaced the M92T36 and MAX77621 to get the unit to turn on, but I'm getting no image -only backlight. I can hear sounds, so I'm sure it's running, but it's not displaying anything.
IC 8316 is not outputting the 5v/-5v despite receiving the 1.8v signal, so it may be the culprit, but it would be nice to know where else the LCD gets its power from.
THanks for your help!