Seems like these codes might be from 5.5.1 OS w/ US version. Try scanning the range 4C3305A8-4C3305AC, or a bit broader, like 4C330000-4C340000
Just tried some of them, no luck......
Seems like these codes might be from 5.5.1 OS w/ US version. Try scanning the range 4C3305A8-4C3305AC, or a bit broader, like 4C330000-4C340000
Just tried some of them, no luck......
Same problem here... I'll try it again to see if I'm just goofin' something up
The codes worked for my US version. Keep in mind that they don't work for the Restoration patch but do seem to work without it. I just changed all of the stats in the original US version then switched to the patched version afterwards.
#FEGecko seems to connect to my wii u everything else refuses....I scanned 4C3305A8-4C3305AC and 4C330000-4C340000.
I get "Failed to parse Scan From address".
Alright, I think I have an idea of whats happening, sorry if it's a bit confusing, I'm not very familiar with this. I think whatever part of the program is applying the offset isn't working properly. The reason is that if I put the codes from here in manually in the "Custom Codes" tab they work fine. And if I add the offset +2841140 to the codes in the #FEGecko code file and then put them in the "custom codes" tab, they work. However they only seem to work with the non-patched version of the game. I've attached my version of the code file for others to try, make sure to backup the initial code file then put this on in the "codes" subfolder. Note that this only has a handful of codes because I'm lazy.
Ah something I forgot to mention, while it only seems to work with the un-patched version, you can move you saves between the patched and un-patched versions freely.However they only seem to work with the non-patched version of the game.
Ah something I forgot to mention, while it only seems to work with the un-patched version, you can move you saves between the patched and un-patched versions freely.
Alright, I think I have an idea of whats happening, sorry if it's a bit confusing, I'm not very familiar with this. I think whatever part of the program is applying the offset isn't working properly. The reason is that if I put the codes from here in manually in the "Custom Codes" tab they work fine. And if I add the offset +2841140 to the codes in the #FEGecko code file and then put them in the "custom codes" tab, they work. However they only seem to work with the non-patched version of the game. I've attached my version of the code file for others to try, make sure to backup the initial code file then put this on in the "codes" subfolder. Note that this only has a handful of codes because I'm lazy.
Alright, I think I have an idea of whats happening, sorry if it's a bit confusing, I'm not very familiar with this. I think whatever part of the program is applying the offset isn't working properly. The reason is that if I put the codes from here in manually in the "Custom Codes" tab they work fine. And if I add the offset +2841140 to the codes in the #FEGecko code file and then put them in the "custom codes" tab, they work. However they only seem to work with the non-patched version of the game. I've attached my version of the code file for others to try, make sure to backup the initial code file then put this on in the "codes" subfolder. Note that this only has a handful of codes because I'm lazy.
Atcually one thing I did try however, was take your code file and manually added the codes that you linked in the first page to the custom codes, poked, it worked, then I started to manually add the codes to the code file, closed fe gecko, reopened, reconnected, and poked some values from the code file without using the custom codes tab, it atcually worked without crashing. However, when trying with multiple save files to recreate it, it didnt work, but i just wanted to note that one specific odd instance where it atcually worked. I would like to note though, is that it no longer crashes on poke, it just does nothing (while manually adding them in custom codes work). Regardless, here is the code file with what you put in in addition to the working codes on the first page, so at the very least people can have an offline version and spend a little less time copying and pasting codes
Sorry to ask, but could you show me the steps on how to manually put copy and paste the codes to do it?
Im already assuming you have fe gecko open, everything working aka you are connected to your wii u and you scanned addresses and found a match, then applied it and all you need to do is just copy and paste, if not, go to earlier in this thread for scanning addresses and some other thread for connecting your wii u (generally finding the wii u ip adress and inputting it in the top left text box, followd by selecting the offset depending on region, then hitting the link button)
1. download the txt file i linked in my last post, go to whereever the download location is you put it in and open it.
2. Select your code, for example max yen and copy it ( e.g 4C3305A8 05F5E0FF)
3. go to the custom codes tab in fe gecko and click add new entry
4. In the small text box, put in a name ( i dont think it matters, just as long as you know what it does)
5. In the giant text box, but in the code (4C3305A8 05F5E0FF for yen) and just click the the square box with a pencil in it to poke your new value, if done correctly, youll get confirmation in blue at the bottom of the program (or an error if done incorrectly)
6. Test it in game by going to the pause menu and checking your yen value, if its at 99999999 then it works (For codes such as max stage rank and max exp for a character, you will have to win a battle and obtain exp)
7. Repeat steps 1-6 for every single code
Just a reminder, this only works if you have an unpatched game, so if you have patched one, get an unpatched version and temporarily replace it until you have all the codes you want, save data are unaffected by patches in this game