No you don't, you are running latest firmware version, patching does nothing. Just visit the maintenance mode.
Tinfoil can Fake Link an Account on your console to make the app think you're connected. That Fake Link lets you Play the Switch online emulated Games
You should add that it links all the profiles to fake accounts, linkalho can do that selectively.
Also, generally speaking this linking business should only be done on emuNAND in my opinion.
@team-knight-rider ,yes all others DLCs working perfectly except the 4 that i posted that after uninstalling them,now when i try to reinstall them they block the game on the Nintendo Switch screen and i can no longer load any save because it gives me a warning.
@HalfScoper ,maintenance mode?
You guys are giving me loads of suggestions and none have worked so far.
I would like to know which of you have Super Robot Wars 30 1.3.1(JP Version)with all DLCs (DLC1 & 2, Expansion Packs and everything else)installed.
If you don't know how to properly, here is a short version:
While loading fusee.bin hold both volume buttons and keep holding them until you reach the mode, if you inject fusee directly, hold the buttons from RCM onwards, if you chainload fusee from hekate hold the buttons before and after tapping the boot entry for Atmosphere.
Inside the mode take a look at the first option, it should state your FW and CFW version and if you booted the mode for sysNAND or emuNAND, which is important in case you use an emuNAND, both NANDs don't affect each other.
Nevertheless you do NOTHING and just reboot by holding POWER until the Switch turns off and then turning it on like you normally do.
Then you have to do something wrong, without wanting to point fingers, but if the maintenance mode as last resort doesn't fix the crash, it's user-related.
@HalfScoper ,maintenance mode?
You guys are giving me loads of suggestions and none have worked so far.
I would like to know which of you have Super Robot Wars 30 1.3.1(JP Version)with all DLCs (DLC1 & 2, Expansion Packs and everything else)installed.
Hi, try
Uninstall the software.
Go to atmosphere>contents
Locate and delete this folder 010022201229A000
Reinstall everything again.
@HalfScoper ,i use Rekado from smartphone to inject hekate directly into the Switch and start Atmosphere.
There is a Thing called Endianness or Byte Order this determines how the Numbers are read...
The Switch itself uses Little Endian but Atmosphere Cheats are in Big Endian Format...
You can basically take a Pair of two Digits (1 Byte) and read them in reverse Order...
1E2E1000 -> 00102E1E -> fmov s0, #1.00000000
1E2D1000 -> 00102D1E -> fmov s0, #0.75000000
1E2C1000 -> 00102C1E -> fmov s0, #0.50000000
1E2A1000 -> 00102A1E -> fmov s0, #0.25000000
D503201F -> 1F2003D5 -> NOP
D65F03C0 -> C0035FD6 -> RET
Let's say you want to modify the Cheat from someone else, the first thing you need to do
is to change the Endianness. I use this Site to perform this Task.
After you changed the Endianness of the Code, copy and paste the Code into this Site
then press the Arm to Hex Button.
The Arm Coverter translates the Hex Code to ARM64 Assembly Language.
Press the Copy Button and Paste the Instruction to the Left Side.
Press the Hex to Arm Button and modify the Value.
Press the GDB/LLDB to switch the Endiannes again, then press the Copy Button and paste
the Code into your Editor.
Are you asking this?
Recent version of Breeze can disassemble ASM cheats, just edit cheats (ZL), toggle disassembly (Rstickdown)
You can easily modify fmov s0, #1.0 to fmov s0,#3.0 for example. (there is a limit to the largest number you can have, it's something like 31.
If you type in "fmov s0,#32" then nothing happens as there is no such ASM code.
Actually what you can put into s0 with this instruction is very limited. To put any value in s0 you need fmov s0, #offset to the value
Last edited by TomSwitch,
Ok and? Then do as I said and hold the volume keys before and after you launch Atmosphere through hekate, I really don't get why that's so difficult to understand.
Last edited by HalfScoper,
I finished the game months ago with all DLC's installed. I also installed the other DLC's (Cybaster and SRX units) after because they were dumped at a later time. But, I installed all of these (The game, all DLC's) via Tinfoil.@HalfScoper ,maintenance mode?
You guys are giving me loads of suggestions and none have worked so far.
I would like to know which of you have Super Robot Wars 30 1.3.1(JP Version)with all DLCs (DLC1 & 2, Expansion Packs and everything else)installed.
@Altair0207 ,i finished the game too a few weeks ago, however i couldn't get Voltes V and KoRyuOh/RyuKoOh to create Inf..EN/SP and Max Score for all mecha,so i uninstalled all DLC and reinstalled and now I have this problem because i had downloaded the game too with Tinfoil and now it doesn't work anymore and installing DLCs from others sources i have this problem.
Similar threads
-
-
@
Psionic Roshambo:
Here on crazy farm we have milk from every mammal known to man, including man!+1 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
