Hacking RELEASE Atmosphere patches (ES, FS and Loader) [fusee_primary only]

[anthonyno]

thanks, hope @Raugo updates the main zip

created a new single-zip package and uploaded that too

Hi all,

I'm in the situation described in this post, I loaded in order:

AMS 0.12.0
2.0.0-10.0.0 AMS 0.12.zip
ams_12.0_and_11.1_NEW_loader_patch_devmenu

with a firmware < 10.0.x and AutoRCM enabled.

I would like to upgrade my NAND to 10.0.1 with ChoidujourNX, but doing so the ams_12.0_and_11.1_NEW_loader_patch_devmenu should not be loaded.
So I'm asking if it is safe to perform this update with ChoidujourNX, or would be better to use another system ( a downgrade of atm ? ) to do it.

Thanks for your support

 

[jester_]

I would like to upgrade my NAND to 10.0.1 with ChoidujourNX, but doing so the ams_12.0_and_11.1_NEW_loader_patch_devmenu should not be loaded.

who told you this? Should be completely fine, the patch interferes with nothing. if you're worried, just remove \atmosphere\kip_patches\loader_patches\ and put it back after update.

 

[Tokiwa]

These patches doesn't interfare with ChoidujourNX at all. I use them with it all the time.

 

[anthonyno]

Thank you all for your valuable support
I performed the upgrade and it ended successfully, but I'm not able now to read an original cartridge.
The system says it's not able to read it.

 

[Gungeon]

If only all these guys can sit down have a chat and let bygones be bygones. Imagine......someday...

 

[jester_]

If only all these guys can sit down have a chat and let bygones be bygones. Imagine......someday...

but kosmos is objectively bad. atmosphere fusee-primary and sigpatches work perfectly

 

[jester_]

sigpatches and atmosphere do not need an update for 10.0.2

 

[burhansalih]

sigpatches and atmosphere do not need an update for 10.0.2

So does that mean we can just update via ChoiDujourNX and we should be good to go....wont need to update patches???

 

[tom2199]

but kosmos is objectively bad. atmosphere fusee-primary and sigpatches work perfectly

Hekate/Kosmos ist not bad in any shape or form, as it does works perfectly as well with the correct sigpatches.

 

[Tyvar1]

So does that mean we can just update via ChoiDujourNX and we should be good to go....wont need to update patches???

correct!

 

[burhansalih]

correct!

Thank you

 

[burhansalih]

Updated to 10.0.2 all ok thanks everyone.

 

[super34]

Hi all, does devmenu works for you with latest firmware and atmosphere 0.12.0? thanks

 

[DocKlokMan]

Thank you all for your valuable support
I performed the upgrade and it ended successfully, but I'm not able now to read an original cartridge.
The system says it's not able to read it.

Disable the nogc patch.

 

[hippy dave]

Hi all, does devmenu works for you with latest firmware and atmosphere 0.12.0? thanks

The (really) old devmenu won't run on 10.x apparently, a newer version would be needed.

 

[Asia81]

Hello, I paste the sigpatchs on my sd, but they don't seems to be applied, I still have an error when isntalling nsp using Goldleaf (I'm on Emunand 10.0.2).

Here is my bootloader config, did I miss something?

[Atmosphere (EmuNAND)]
fss0=atmosphere/fusee-secondary.bin
kip1=atmosphere/kips/*
icon=bootloader/res/emu_boot.bmp
{}

 

[C7XL]

Hello, I paste the sigpatchs on my sd, but they don't seems to be applied, I still have an error when isntalling nsp using Goldleaf (I'm on Emunand 10.0.2).

Here is my bootloader config, did I miss something?

[Atmosphere (EmuNAND)]
fss0=atmosphere/fusee-secondary.bin
kip1=atmosphere/kips/*
icon=bootloader/res/emu_boot.bmp
{}

If you’re going to use these patches, then the config should be:

[Atmosphere (EmuNAND)]
payload=bootloader/payloads/fusee-primary.bin
icon=bootloader/res/emu_boot.bmp

Make sure you have the fusee-primary in your payloads.

 

[Asia81]

If you’re going to use these patches, then the config should be:

[Atmosphere (EmuNAND)]
payload=bootloader/payloads/fusee-primary.bin
icon=bootloader/res/emu_boot.bmp

Make sure you have the fusee-primary in your payloads.

thank you, it worked!

 

[fnnoobee]

If you’re going to use these patches, then the config should be:

[Atmosphere (EmuNAND)]
payload=bootloader/payloads/fusee-primary.bin
icon=bootloader/res/emu_boot.bmp

Make sure you have the fusee-primary in your payloads.

I just want to thank you for this post. I had updated to 10.0.2 manually and had not been able to get Atmosphere to load afterwards coming from SXOS (which only supports up to 10.0.1). After applying the patches and changing my ini file configuration for Hekate to yours, I'm up and running again. Thanks again!

 

[tom2199]

I just want to thank you for this post. I had updated to 10.0.2 manually and had not been able to get Atmosphere to load afterwards coming from SXOS (which only supports up to 10.0.1). After applying the patches and changing my ini file configuration for Hekate to yours, I'm up and running again. Thanks again!

I know it's not really on topic but SX works on 10.0.2 as well. SX is based on Atmosphere and since it didn't need an update from 10.0.0 to 10.0.2 the probability was high SX didn't either.