The NTAG MUST BE A NTAG215, this WILL NOT WORK with the blue keyfob or plastic card that comes with the RF shield!
The NTAG MUST BE A NTAG215, this WILL NOT WORK with the blue keyfob or plastic card that comes with the RF shield!
- Joined
- Oct 21, 2005
- Messages
- 5,489
- Trophies
- 0
- Age
- 54
- Location
- Somewhere in this potatoland!
- Website
- djoen.dommel.be
- XP
- 2,857
- Country
This worked from the first release for me and all i want works like it should.
like said in the quote, for 99% it works great, but the 1% that have problems talk like the are 99%
Marche à merveille sur w10 x64, arduino Uno.
Merci pour ton travail mis à dispo de chacun sans rien réclamer
Works like a charm on w10 x64, arduino Uno.
Merci pour ton travail mis à dispo de chacun sans rien réclamer
Works like a charm on w10 x64, arduino Uno.
This worked from the first release for me and all i want works like it should.
like said in the quote, for 99% it works great, but the 1% that have problems talk like the are 99%
Marche à merveille sur w10 x64, arduino Uno.
Merci pour ton travail mis à dispo de chacun sans rien réclamer
Thanks for this support
!What's do you do to get this error? We need to have more informations than just an error!
-------------------------------------------------------------------
Oh and... just a little teasing right here:
Yes, I try to reverse USB protocol of PowerSaves (who ConsoleX generously donate me). Right now I'm able to read PowerTag and NTAG without the datel program.
Many things was done. A lot have to be ^^'!
Donators had a little preview of the next version
Well, I can dump amiibos, but when i want to write one, I select the port, click the button and this appears, everytime I try it
Searching in forums with the arduino project alternative seen some previus pages, i see the people tell to change:
Try to authenticate with:
Serial.println("Authenticating again using key B..."); status = mfrc522.PCD_Authenticate(MFRC522:
ICC_CMD_MF_AUTH_KEY_A, trailerBlock, &key, &(mfrc522.uid));instead of:
Serial.println("Authenticating again using key B..."); status = mfrc522.PCD_Authenticate(MFRC522:
ICC_CMD_MF_AUTH_KEY_B, trailerBlock, &key, &(mfrc522.uid));Per default some cards are delivered with the access bits set in a way that KeyB can be read from the card. Therefore you can not write with KeyB and therefore you have to use keyA. (http://www.mouser.com/ds/2/302/MF1S503x-89574.pdf Section 8.7.1 - 8.7.3)
Happens with AmiiBomb and the project seen before, hope it helps you!
EDIT:
The NFC Cards: https://es.aliexpress.com/item/10pc...32780252276.html?spm=2114.13010608.0.0.weGEos
Last edited by Hemoner,
Well, I can dump amiibos, but when i want to write one, I select the port, click the button and this appears, everytime I try it
Searching in forums with the arduino project alternative seen some previus pages, i see the people tell to change:
Try to authenticate with:
Serial.println("Authenticating again using key B..."); status = mfrc522.PCD_Authenticate(MFRC522:
instead of:
Serial.println("Authenticating again using key B..."); status = mfrc522.PCD_Authenticate(MFRC522:
Per default some cards are delivered with the access bits set in a way that KeyB can be read from the card. Therefore you can not write with KeyB and therefore you have to use keyA. (http://www.mouser.com/ds/2/302/MF1S503x-89574.pdf Section 8.7.1 - 8.7.3)
Happens with AmiiBomb and the project seen before, hope it helps you!
EDIT:
The NFC Cards: https://es.aliexpress.com/item/10pc...32780252276.html?spm=2114.13010608.0.0.weGEos
Hum, I use any mfrc522.PCD_Authenticate function in AmiiBombuino...
Your NFC Cards look good... Do you put the NTAG on the NFC Reader before you click "OK" on the popup is ask for? Because if you put it after you click on "OK" it's probably for that...
You are the first one how speak about this error. It's strange because you can Read Amiibo too. Try to reflash AmiiBombuino on the Arduino.
Will try it again, but when triying to work, flashed again and tried to put the tag after clicking OK
Seems like when it tries to authenticate again with the KeyB it cant, so you have to authenticate again with KeyA
Dont know so much about editing source code, but if you need help to test it here i am
Also, i have a problem when copying the Amiibo Key, i copy to clipboard and when the save prompt tells me to save it, it wont work, no saves, have to write it manualy with a HEX editor
EDIT: Maybe it needs to authenticate again when writing? Will try to paste the autenticate code in the AmiiBombuino.ino
Last edited by Hemoner,
Will try it again, but when triying to work, flashed again and tried to put the tag after clicking OK
Seems like when it tries to authenticate again with the KeyB it cant, so you have to authenticate again with KeyA
Dont know so much about editing source code, but if you need help to test it here i am
Also, i have a problem when copying the Amiibo Key, i copy to clipboard and when the save prompt tells me to save it, it wont work, no saves, have to write it manualy with a HEX editor
EDIT: Maybe it needs to authenticate again when writing? Will try to paste the autenticate code in the AmiiBombuino.ino
Lol. Stop to speak about KeyB, KeyA or the authenticate function... I don't use any of that in AmiiBombuino! The mistake is at another place...
You have to put the NTAG before you clicking OK!
About the Amiibo Key... "It won't work" don't help me... If it's ask you to save (and select where) the Key file is save somewhere. You are the first one (too) with this problem...
Thanks for this support
What's do you do to get this error? We need to have more informations than just an error!
-------------------------------------------------------------------
Oh and... just a little teasing right here:
Yes, I try to reverse USB protocol of PowerSaves (who ConsoleX generously donate me). Right now I'm able to read PowerTag and NTAG without the datel program.
Many things was done. A lot have to be ^^'!
Donators had a little preview of the next version
How did you go about reversing the protocol?
I sniff the USB traffic, saw what is send on USB port and what is receive when I read/write NTAG/PowerTag and reproduce it with success.. I can control the LED of the PowerSaves, Read an NTAG/PowerTag and Write a little part of PowerTag with success
! I don't try to do more, because I code the support in AmiiBomb at the same time!
I sniff the USB traffic, saw what is send on USB port and what is receive when I read/write NTAG/PowerTag and reproduce it with success.. I can control the LED of the PowerSaves, Read an NTAG/PowerTag and Write a little part of PowerTag with success
Do you use wireshark?
I firstly use USBPCAP (http://desowin.org/usbpcap/) and parse the dump in Wireshark but it's too annoying to do... So I use the trial version of USBlyzer (http://www.usblyzer.com/) who's do the job pretty well! I don't know if another free tool like USBlyzer exist :/...
K2000 is back (in blue): https://giphy.com/gifs/3ohzdXxdRRAAjDfXuU
K2000 is back (in blue): https://giphy.com/gifs/3ohzdXxdRRAAjDfXuU
Last edited by Ac_K,
- Joined
- Oct 21, 2005
- Messages
- 5,489
- Trophies
- 0
- Age
- 54
- Location
- Somewhere in this potatoland!
- Website
- djoen.dommel.be
- XP
- 2,857
- Country
Maybe check your setup? You have multiple people here confirming this is working, including myself.
EDIT*** Glad you got it working
Last edited by GraFfiX420,
- No one is chatting at the moment.
-
@
Sonic Angel Knight:
Or, I also heard that if you use flash memory, it can act as more "RAM" at least windows tell me when I stick a flash drive into it. -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
K3Nv2:
I can think of the design teams process another joystick and no audio or a joystick and mono audio -
-
-
-
-
-
-
-
-
