Recent content by Nikaia-Repair

  1. N

    3DS XL Stuck at boot (black screen) when SD card is inserted

    I don't think it's an SD reader issue, it detects the SD insertion/removal and every pin seems in great shape... I've already cleaned it. I can't access any of these as the payloads are supposed to be on the SD card... 1713530933 It DEFINITLY was a SD reader problem. I didn't see one pin was...
  2. N

    3DS XL Stuck at boot (black screen) when SD card is inserted

    I'm going to try that, thanks a lot mate :) 1713528635 Edit : Unfortunately, i'm following every step but i'm stuck when it tells to re-insert the SD card and boot while holding "Start"... I've tried with 3 different SD cards, nothing works. I'm sure my start button is working, i've tested it in...
  3. N

    3DS XL Stuck at boot (black screen) when SD card is inserted

    Hello guys, I've been trying to install Luma on an Old 3DS XL. Normally, I always verify that Luma ins't Installed... but this tim I did not :cry: The thing is, in the process I usually do, I update to the latest firmware, then I format the device, and then I install luma. So I updated the...
  4. N

    replacement shell for my "New Nintendo 3ds" (not the XL model)

    Up ! Need some too 🥲
  5. N

    3DS shuts off when SD card is inserted

    The thing is I took it from another board, which was 100% functional on this side... Yeah, I think I might stop to try to repair it and sell it while telling everything to the buyer :cry: Yeah it seems like it's only when accessing the storage, because i've already inserted it when in...
  6. N

    3DS shuts off when SD card is inserted

    Nobody ever had this issue? I don't get what could be wrong :cry:
  7. N

    3DS shuts off when SD card is inserted

    I've already changed it for a working one, still not working...
  8. N

    3DS shuts off when SD card is inserted

    I've already tried with several SD cards that are all absolutely fine in other devices, it can't come from it. I've even tried with an empty micro SD adapter which creates the same issue...
  9. N

    3DS shuts off when SD card is inserted

    I've already tried, but it seems everything is fine... I don't get how it is possible. It seems that it's only when the device is trying to access the SD memory, so maybe a faulty CPU or something... but I think it's going to be hard to repair :wacko: Thanks for your answer :) 1712330094 I...
  10. N

    3DS shuts off when SD card is inserted

    Hello guys, I have a (i think) rare issue on an Old 3DS XL. The motherboard seems absolutely fine and is booting perfectly. I was going to try and put luma on it, but a big issue happened ; when I tried to put an SD card inside, the device shuts down. If I try to boot it with SD card inserted...
  11. N

    Did I kill my brand new OLED switch?

    the clock trace is in bad shape, after several soldering tries... i have to do a repair on it, do you think it could be the source of the problem? I thought it wouldn't affect any capacitor value...
  12. N

    Did I kill my brand new OLED switch?

    Hello, Here are some pictures. As you can see I dismounted bot SP1 and SP2 capacitors. 1.5 Ohms on each one to the ground. The capacitors were dismounted while measuring.
  13. N

    Did I kill my brand new OLED switch?

    I will do that tomorrow morning, I don't have it here right now. thanks for your time :D The worst thing is that I did at least 3 OLED Models for friends of mine before and never ever experienced that kind of trouble. I did 15+ classic switch also with no defect rate. When it's one I buy for...
  14. N

    Did I kill my brand new OLED switch?

    Hello, thanks for your answer My Hwfly setup? i ripped it all off the board hoping to at least make it boot normally... 1706217756 If i'm not wrong, one side is always on ground? I'm going to try tomorrow but I think it will be between 1ohm and 1.5 ohms for what i've seen today
  15. N

    Did I kill my brand new OLED switch?

    Thanks for your answer ! I don't think there is any solder ball, i've been very careful doing it, but I'm going to check anyway. I've already removed the ones I soldered, which did not make the values change. I may try to remove all capacitors and see if it changes the problem before putting...
See more
General chit-chat
Help Users
  • Veho
  • BakerMan
    I rather enjoy a life of taking it easy. I haven't reached that life yet though.
    Veho @ Veho: https://youtube.com/watch?v=Y23PPkftXIY