Recent content by darkangel5000

  1. darkangel5000

    Can't unscrew Wii U gamepad screws

    If the screwdriver size is correct: More force ¯\_(ツ)_/¯
  2. darkangel5000

    Hacking Hardware Picofly - a HWFLY switch modchip

    It is, at least somewhat. The Tegra checks for the correct partition UUID. Thankfully it doesn't check for eMMC serial number/make though, therefore the GUID on a new eMMC can be overwritten with the old value.
  3. darkangel5000

    Hardware 3DS screen flashing popping and shutting down.

    Your instinct is right: The ribbon cable that connects the top-half to the mainboard is RIP, get a new one and it should work as new again.
  4. darkangel5000

    Wii U modchip based on de_Fuse now dumps and restores SLC/MLC, with redNAND and Aroma support

    Because it isn't real "hard" storage like punch cards (and even those will wither away, given enough time). NAND and NOR flash (also EPROMs and other programmable storage) suffers from shorter retention time in comparison to other mediums, because they're dependant on holding their charge (on a...
  5. darkangel5000

    Hacking Hardware Picofly - a HWFLY switch modchip

    I've just received the resistors in the mail and promptly replaced the old resistors with them. 51R (both 0603/0805 package) measure at about 50.2-50.4Ohms (sample size: 20 resistors) and the glitch times are expectedly just as good as with 100R in parallel and better than with the 47R resistors...
  6. darkangel5000

    Hacking Hardware Picofly - a HWFLY switch modchip

    This basically coincides with my findings about the SKHynix H26M74002HMR in its datasheet. 47Ohms was *a bit* fluky when it came to glitching, 2x100Ohms in parallel (~=50Ohms) per emmc line works a bit better. I'm currently evaluating if using 51R (given 10% manufacturing tolerance, so...
  7. darkangel5000

    Hacking Hardware Picofly - a HWFLY switch modchip

    No, you need 47 Ohm resistors, not 47kOhm. Also I can only advice you to buy "Lackkupferdraht" in 0.1mm and 0.3mm respectively for the installation and cpu mosfet instead of the wires you've put into your cart.
  8. darkangel5000

    accidently installed latest firmware without atmosphere being caught up

    The latest atmosphere that was compatible with FW16.0.0 is also compatible with FW16.0.1 out of the box, this ain't your issue. Try to copy the atmosphere files to the sd card again.
  9. darkangel5000

    Give-away GBAtemp 20th Anniversary giveaway - WEEK FOUR - Win a custom-built Game Boy from Jayboymodz - 24hrs remain!

    *Week Four :creep: Anyways, good luck everybody!
  10. darkangel5000

    Give-away GBAtemp 20th Anniversary giveaway - WEEK THREE - Win an Analogue Pocket - 24hrs remain!

    Not that I'd need it, but, I NEED IT. Best of luck to y'all.
  11. darkangel5000

    Ren'Py - Modifications directly in NSP files / repack

    Yup, that's exactly what I want. So thanks, I'll take a look into Skyline, as theoretically Ren'Py should just dynamically load rpyc files it finds in the \game directory Regarding the file I'll shoot you a DM when I get home. There's zero need to work with the scrambled .pngs, as Ren'Py on...
  12. darkangel5000

    Ren'Py - Modifications directly in NSP files / repack

    Hey there. After I've succesfully used LayeredFS to mod Artemis Engine visual novels back to their "original" state, it looks like I've run into a brick wall when it comes to Ren'Py-games. One example of this would be the VN Summer Days, which comes with the same...
  13. darkangel5000

    Gaming Games you loaned out but never got back?

    Yeah, a whole ass SNES + all the games to my older brother, who later claimed that the games got stolen by one of their "friends" - only for me to find the exact same import copy of Street Fighter II Turbo + region adapter in my nephews game shelf 25 years later. Also a friend at school...
  14. darkangel5000

    Homebrew Cannot exploit my ps4 on 9.0 firmware

    Known error with the Al-Azif DNS, for whatever reason. If you can - block the PS servers on your router or get a RaspberryPi with PiHole to do the job.
  15. darkangel5000

    Gameboy Color Button A not working

    P10 is just a test pad. But the via for the a button is right next to it and emerges again somewhere above the U10BE silkscreen marking. If you have continuity between the button pad and those vias, it could be a problem with the CPU CGB, where it directly connects to pin 125 if I'm not mistaken.
See more
General chit-chat
Help Users
  • No one is chatting at the moment.
    BigOnYa @ BigOnYa: I played the intro to far cry 5, that is like some crazy Jim Jones cult shit. Still its petty...