Do you know what causes this error on import?
Code:
Import failed
Level: LEVEL_PERMANENT(-5)
Summary: SUMMARY_INVALID_ARGUMENT(7)
Module: MODULE_NN_AM(32)
Desc: (unknown)(106)
i had this error once, and i guess it is a faulty cia file. did you edit the .cia file after compiling?
p.s. anybody who wants to switch between regions: edit the byte at offset 2018 in icon.bin before compiling (http://3dbrew.org/wiki/SMDH#Region_Lockout), i had succes with pilotwings
Why is it in the icon file?i had this error once, and i guess it is a faulty cia file. did you edit the .cia file after compiling?
p.s. anybody who wants to switch between regions: edit the byte at offset 2018 in icon.bin before compiling (http://3dbrew.org/wiki/SMDH#Region_Lockout), i had succes with pilotwings
Hmmm, so I compiled my decrypted Ocarina of time into a cia. Then I converted it to cci with -ccitocia in order to inject the decrypted exheader as mentioned earlier in this thread. I then converted back to cia with -ccitocia and installed it to rednand. But when I try to run it, I get "An error has occurred" instead of the usual freezing on the black 3ds screen.
ROM to CIA Guide
This guide requires makerom and ctrtool.
Step1: decrypt the .3ds rom.
I will not explain it in this tutorial, as it is explained a couple of times around the forum. (http://gbatemp.net/threads/release-3ds_ctr_decryptor-void.370684/)
If you end up with a decrypted romfs.bin, exheader.bin, code.bin (decompressed), icon.bin and banner.bin you did everything correct.
Step2: creating an .rsf file
The .rsf file is a little bit different then the one for .3ds roms. Anyway here is the proper one, make sure you fill in the XXXX the right way. Just copy the text in the codebox underneath in a text editor and save it as cia.rsf in the folder with the other stuff.
• you can open the exheader or original rom in a hex editor to look up the right values for the companycode, producttyp and productcode
•For the correct UniqueID you can check ctrtool and the official rom. Just remove the last 2 0 and write the 4 digits before that in the .rsf file:
step 3: creating the .cia
Open the command window in the folder with the exefs.bin, exheader.bin, romfs.bin, icon.bin, code.bin, banner.bin, cia.rsf and makerom. Now run the following command:
this will output an .cia file which you can install with the DevMenu and then run.
If you encounter an error saying "[ROMFS ERROR] Invalid RomFS Binary.", then remove the "-romfs romfs.bin" from the command.
This guide requires makerom and ctrtool.
Step1: decrypt the .3ds rom.
I will not explain it in this tutorial, as it is explained a couple of times around the forum. (http://gbatemp.net/threads/release-3ds_ctr_decryptor-void.370684/)
If you end up with a decrypted romfs.bin, exheader.bin, code.bin (decompressed), icon.bin and banner.bin you did everything correct.
Step2: creating an .rsf file
The .rsf file is a little bit different then the one for .3ds roms. Anyway here is the proper one, make sure you fill in the XXXX the right way. Just copy the text in the codebox underneath in a text editor and save it as cia.rsf in the folder with the other stuff.
• you can open the exheader or original rom in a hex editor to look up the right values for the companycode, producttyp and productcode
•For the correct UniqueID you can check ctrtool and the official rom. Just remove the last 2 0 and write the 4 digits before that in the .rsf file:
Code:
BasicInfo:
Title : "Custom Title"
CompanyCode : "00"
ProductCode : "CTR-P-DERP"
ContentType : Application # Application / SystemUpdate / Manual / Child / Trial
Logo : Nintendo # Nintendo / Licensed / Distributed / iQue / iQueForSystem
TitleInfo:
UniqueId : 0x7850
Category : Application
Option:
UseOnSD : true # true if App is to be #installed to SD
EnableCompress : true # Compresses exefs code
FreeProductCode : true # Removes limitations on ProductCode
EnableCrypt : true # Enables encryption for NCCH and CIA
MediaFootPadding : true # If true CCI files are created with padding
AccessControlInfo:
ExtSaveDataId: 0xb7850 # same as UniqueId
SystemSaveDataId1: 0x00000000 # plaintext exheader
SystemSaveDataId2: 0x00000000 # plaintext exheader
OtherUserSaveDataId1: 0x00000 # plaintext exheader
OtherUserSaveDataId2: 0x00000 # plaintext exheader
OtherUserSaveDataId3: 0x00000 # plaintext exheader
UseOtherVariationSaveData : false
SystemControlInfo:
SaveDataSize: 1M # plaintext exheader
RemasterVersion: 0 # plaintext exheader
StackSize: 0x00040000 # plaintext exheader
JumpId: 0x000400000b000000L # plaintext exheader (<full UniqueID>L)step 3: creating the .cia
Open the command window in the folder with the exefs.bin, exheader.bin, romfs.bin, icon.bin, code.bin, banner.bin, cia.rsf and makerom. Now run the following command:
this will output an .cia file which you can install with the DevMenu and then run.
If you encounter an error saying "[ROMFS ERROR] Invalid RomFS Binary.", then remove the "-romfs romfs.bin" from the command.
Getting this when trying to build the CIA
[EXHEADER ERROR] Failed to set ExtSaveDataId. UseExtSaveData must be true.
[EXHEADER ERROR] Failed to create ExHeader
[NCCH ERROR] NCCH Build Process Failed
[RESULT] Failed to build outfile
EDIT:
Set UseExtSaveData to true under AccessControlInfo in the .rsf and it compiled.
If you got mk7 compiled did it work for you? I got it installed but when I run it I get black screen an error has occurred message. If it did work can you post your rsf file.
The .cia compiled and installed. When I boot it it shows the Mario Kart 7 logo for a moment then goes to "an error has occured."
Before I start, let me say thanks for removing the sketchy network calls, and for writing up the tutorial.
Figured I'd have a go at this with my Ocarina of Time cart, but makerom (compiled myself from the latest source at https://github.com/3DSGuy/Project_CTR) says [SETTING ERROR] Argument "-elf" is required.
Here's how I tried to run makerom:
Code:
makerom -f cia -rsf rsf.rsf -target t -desc app:1
-icon decrypted/exefs/icon.bin -banner decrypted/exefs/banner.bin -exefslogo -ex
header decrypted/exheader.bin -romfs decrypted/romfs.bin -rsf rsf.rsf -o rom.ciaNote that the -rsf is listed twice, like the tutorial deems it so (so it's not a mistake on my end, if it is indeed a mistake).
Here's the RSF I'm using (UniqueId is the same thing as "Program ID" in ctrtool, right?):
Code:
BasicInfo:
Title : "The Legend of Zelda: Ocarina of Time 3D"
CompanyCode : "00"
ProductCode : "CTR-P-AQEE"
ContentType : Application # Application / SystemUpdate / Manual / Child / Trial
Logo : Nintendo # Nintendo / Licensed / Distributed / iQue / iQueForSystem
TitleInfo:
UniqueId : 0x0335
Category : Application
Option:
UseOnSD : true # true if App is to be #installed to SD
EnableCompress : true # Compresses exefs code
FreeProductCode : true # Removes limitations on ProductCode
EnableCrypt : true # Enables encryption for NCCH and CIA
MediaFootPadding : true # If true CCI files are created with padding
AccessControlInfo:
ExtSaveDataId: 0x0335 # same as UniqueId
SystemSaveDataId1: 0x00000000 # plaintext exheader
SystemSaveDataId2: 0x00000000 # plaintext exheader
OtherUserSaveDataId1: 0x00000 # plaintext exheader
OtherUserSaveDataId2: 0x00000 # plaintext exheader
OtherUserSaveDataId3: 0x00000 # plaintext exheader
UseOtherVariationSaveData : false
SystemControlInfo:
SaveDataSize: 128K # plaintext exheader
RemasterVersion: 0 # plaintext exheader
StackSize: 0x00004000 # plaintext exheader
JumpId: 0x0004000000033500L # plaintext exheader (<full UniqueID>L)Any insight is appreciated.
Similar threads
- No one is chatting at the moment.
