What comes after a Nintendo Switch firmware update, but before the billionth “stability” joke? The usual speedy Atmosphere release! Version 0.11.0 of the custom firmware is now available, adding in support for yesterday’s OFW 10.0.0. At the time of writing, this version of Atmosphere is in pre-release form, meaning bug reports are still being submitted and subsequently patched. Once 0.11.0 is considered stable enough, it’ll go from pre-release to a normal release. Below are the full patch notes, as well as the GitHub project page so you can get your Switch up to date and ready to rock.

• Support was added for 10.0.0.
  • Exosphere has been updated to reflect the new key import semantics in 10.0.0.
  • kernel_ldr now implements physical ASLR for the kernel's backing pages.
  • Loader, NCM, and PM have been updated to reflect the changes Nintendo made in 10.0.0.
  • Creport was updated to use the new pgl service to terminate processes instead of ns:dev.
• A reimplementation of the erpt (error reports) system module was added.
  • In previous versions of Atmosphere, a majority of error reports were prevented via a combination of custom creport, fatal, and stubbed eclct.
  • However, error reports were still generated via some system actions.
    • Most notably, any time the error applet appeared, an error report was generated.
    • By default, atmosphere disabled the uploading of error reports, but going online in OFW after an error report occurred in Atmosphere could lead to undesirable telemetry.
  • Atmosphere's erptreimplementation allows the system to interact with existing error reports as expected.
  • However, all new error reports are instead saved to the sd card (/atmosphere/erpt_reports), and are not committed to the system savegame.
    • Users curious about what kind of telemetry is being prevented can view the reports as they're generated in there.
    • Reports are saved as msgpack (as this is what Nintendo uses).
  • Please note, not all telemetry is disabled. Play reports and System reports will continue to function unmodified.
  • With atmosphere's erptimplementation, homebrew can now use the native error applet to display errors without worrying about generating undesirable telemetry.
• libstratosphere and libvapours received a number of improvements.
  • With thanks to @Adubbz for his work, the NCM namespace now has client code.
    • This lays the groundwork for first-class system update/downgrade homebrew support in the near future.
  • In particular, code implementing the os namespace is significantly more accurate.
  • In addition, Nintendo's allocators were implemented, allowing for identical memory efficiency versus Nintendo's implementations.
• General system stability improvements to enhance the user's experience.

For information on the featureset supported by 0.11, please see the official release notes.

Source

 

[gizmomelb]

nintendo has gone on record to say that they may add external hdd support, but I kinda doubt it due to the fact that the system is meant to be portable. as far as atmosphere, I doubt it will ever have support for an external hdd due to piracy concerns.

atmosphere and piracy concerns.. you have seen the number of question regarding sigpatches right? the whole atmosphere isn't for piracy schtick makes me laugh.. it's like windows isn't for piracy, or *nix isn't for piracy.

 

[leerpsp]

So if I get this right since I updated to 10.0.0 on my switch I can not boot or use cfw at all? because i ether get a black screen or every error that was named here and some.

 

[gizmomelb]

Allowing homebrew to read your hard drive is a far cry from executing code from there. E-shop installs have zero ability there and atmosphere piracy is basically just that minus valid signatures. Hell I thought even SXOS was basically copying the XCIs to the SD card as part of the mounting process. Anyway I thought Addubz was even working on that feature for atmosphere.

nah, SX OS actually RUNS XCI images direct from the USB device, it doesn't copy the file to SD at all.

 

[linuxares]

So if I get this right since I updated to 10.0.0 on my switch I can not boot or use cfw at all? because i ether get a black screen or every error that was named here and some.

No, it will work fine if you boot with Atmosphere and not Hekate for example.

 

[leerpsp]

I was getting Unknown pkg1 version." Not yet supported HDS version!" Failed to launch HDS after missing with it for a wile I get Failed to apply 'nosigchk'! if i boot with Atmosphere I get the boot screen then a black screen and that is all no amount of formatting or anything will work and iv been at this for hours.

 

[Keylogger]

New release: https://github.com/atmosphere-NX/Atmosphere/releases/tag/0.11.1

 

[urherenow]

I was getting Unknown pkg1 version." Not yet supported HDS version!" Failed to launch HDS after missing with it for a wile I get Failed to apply 'nosigchk'! if i boot with Atmosphere I get the boot screen then a black screen and that is all no amount of formatting or anything will work and iv been at this for hours.

there are no sigcheck hashes for 10.0 yet. If you have anything unofficial on your home screen, to include a custom theme (you can simply delete the theme), it won't load HOS at all. Also, you probably need to install that new Atmosphere that just released.

This is why I don't update CFW right after a new firmware comes out.

 

[The_Green_Nerd]

You can use SXOS 9.2.0 EmuNAND on 10.0.0 SysNAND you know?

Is there any news if there is any fuse burning? 9.2.0 will work from an emunand SD-card. But standy functionality will not. Correct me if I am wrong.

 

[spotanjo3]

How long does it usually take to release the sigpatches?

Thats why nobody answered your question. I am going to answer yours. Dont ASK. That's simple.

 

[Essasetic]

Is there any news if there is any fuse burning? 9.2.0 will work from an emunand SD-card. But standy functionality will not. Correct me if I am wrong.

10.0.0 does burn a fuse.
https://switchbrew.org/wiki/Fuses

 

[leerpsp]

I updated it to the newest release and now get this

What am I doing wrong.

 

[Essasetic]

I updated it to the newest release and now get this

What am I doing wrong.

Do you have emuiibo installed? If so remove it. That needs to be manually updated to support 10.0.0

 

[AD2076]

I updated it to the newest release and now get this

What am I doing wrong.

remove emuiibo from your sd

 

[leerpsp]

Do you have emuiibo installed? If so remove it. That needs to be manually updated to support 10.0.0

Just now got it working but non of the games will but it will corrupt the data over and over. hope i can get this fixxed i have a 6 year old that wants to link trade pokemon with me to day and don't want to have to tell her its broken.

 

[linuxares]

Just now got it working but non of the games will but it will corrupt the data over and over. hope i can get this fixxed i have a 6 year old that wants to link trade pokemon with me to day and don't want to have to tell her its broken.

You can't until the sigpatches are updated....

 

[leerpsp]

You can't until the sigpatches are updated....

ah ok so from now on I need to hold off on any kind of updating till everything is out, I know better now.

 

[Frankbel]

ah ok so from now on I need to hold off on any kind of updating till everything is out, I know better now.

That's a golden and well-known rule.

 

[Deleted member 514389]

And thats why "Atmosphere > any other cfw".

Always.

 

[BaamAlex]

Old sigpatchs still work?

How the f..k should older signature patches work with the latest firmware? Tell me that.

 

[Cyan]

hoaa, I didn't even see the v10 release info yet that I see Atmo11.
Really nice changelog (I think) about error report, great work and thanks to everyone involved!

I'm curious what that "homebrew-able OS upgrade/downgrade" method means or will allow in the future.

I'll look for fw v10 changelog now.
edit : button remapping with multiple config? what! At last. that's what I just suggested to Sony's SD5 last week after I said "this is the first homebrew on any hacked console"? someone is watching me...
Thank you and congratz Nintendo being the first to do it after 30 years!