the memchunkhax2 hype post with .3dsx

there is more going on in the comments that this post is somewhat outdated now.
read this. it's important.
  • you cannot use this for downgrading, installing .CIAs, etc. yet. it is purely for testing.
  • when you post results, include your model, entry point, and full firmware version (e.g. 10.3.0-28E).
  • this has pretty much no risk of bricking as it doesn't write to the NAND or anything. with that in mind I am not responsible if anything weird happens so run this at your own risk.
  • if you get a test value of DEADCAFE then it has worked.
  • this might help with getting "DEADCAFE":
    Ptrk25 said:
    99% Deadcafe on N3DS 10.3
    • Use menuhax
    • Open FTP-3DS
    • Close it with L+R+Down+B
    • Open memchunkhax
    • It should display deadcafe
    Ptrk25
    Click to expand...

latest build:
memchunkhax2-a636c1b.zip
Sun Jan 3 14:30:42 PST 2016
this is based on commit a636c1b at GitHub

libctru build:
https://github.com/smealum/ctrulib/tree/cf0a0dc8a0da5fa4c7985762810e8b813bca8769

thread:
https://gbatemp.net/threads/clarification-thread-what-is-going-on.407074/
  • Like
Reactions: 20 people

Comments

Pandaxclone2
So basically the problem atm is potentially bricking your system (Especially on N3DS) and the firmware not being functional? Correct me if I'm wrong.
 
SableSugar
@Pandaxclone2 the latter problem has been fixed by the most recent release of sysupdater
 
SableSugar
Okay, preparing to downgrade from 10.3U O3DS using TheStoneBanana's tutorial, will reply with results (*・∀-)☆
 
dankzegriefer
@mrjoker59 I waited about 15, if it doesn't say "Getting CIA file informations" you'll probably be fine.
 

Blog entry information

Author
ihaveahax
Views
6,757
Comments
1,932
Last update

More entries in Personal Blogs

More entries from ihaveahax

Share this entry

General chit-chat
Help Users
  • B @ BigArnold:
    Can you guys help with my problem concerning my Switch?
  • K3Nv2 @ K3Nv2:
    Did you switch it up
  • B @ BigArnold:
    Switch what up?
  • K3Nv2 @ K3Nv2:
    Switch the switch to resolve your issue
  • Xdqwerty @ Xdqwerty:
    @BigArnold, sorry but i cant, i dont have a switch. also what k3nv2 says is a joke
  • B @ BigArnold:
    That's what I figured. I put a post up in a forum but no one seems to replying to posts there. I also don't what this chat is attached to.
  • K3Nv2 @ K3Nv2:
    General chat as it implies
  • Xdqwerty @ Xdqwerty:
    @BigArnold, try posting in the "switch noob paradise" thread
  • B @ BigArnold:
    That's where I put it. But like I said other people's posts from a day or two ago have no responses. I'm not sure if the chat is part of the Nintendo forum that I'm on or a part of the website as a whole.
  • Xdqwerty @ Xdqwerty:
    @BigArnold, part of the website as a whole
  • Xdqwerty @ Xdqwerty:
    then try making a thread
  • Xdqwerty @ Xdqwerty:
    wait you are too new to be able to do that
  • B @ BigArnold:
    That's fine. I'll find my way.
     +1
  • BigOnYa @ BigOnYa:
    @BigArnold you put the fusee or hekate.bin in the hekate/ payloads folder, or use app to push the payload to switch while its in rcm mode
     +1
  • B @ BigArnold:
    The problem is is that TegraGUI isn't detecting my Switch despite it being plugged in and in RCM or maintenance mode.
     +1
  • BigOnYa @ BigOnYa:
    Did you click install driver inside the tegra app.
  • B @ BigArnold:
    I did all of that stuff and it seemed successful but still nothing. The only thing different from the guide I used was that my device wasn't showing up as APX but rather Nintendo Switch.
  • B @ BigArnold:
    I did it inside the Tegra app and Zadig.
  • BigOnYa @ BigOnYa:
    Try a different USB c cable, or different USB port on your pc.
  • B @ BigArnold:
    I tried a different port and don't have another cable. I'm fairly certain there's no issue with the equipment I'm using.
  • BigOnYa @ BigOnYa:
    Some cheap USB c cables don't send data, they only charge
  • B @ BigArnold:
    The cable is usually used to connect my controller to my switch's dock.
  • BigOnYa @ BigOnYa:
    Only other thing Id suggest is using a phone/tablet and use the Rekato app, or different pc
  • B @ BigArnold:
    Okay then.
    Thanks for your help.
     +2
  • S @ salazarcosplay:
    @Xdqwerty how are you doing!?
    S @ salazarcosplay: @Xdqwerty how are you doing!?