MY Modchipped OLED was working but started normal boot after reinserted SD Card

[pigy33]

So I have been using my modded OLED switch fine and usually when I don't have an SD card it shows up with a rasberry symbol and says something like failed to load payload. However, I took out the SD card to add some cheats to the atmosphere -> content folder and now the Switch is loading to the OG NAND boot that is an unhacked switch whether I have the SD card in my Switch or not. Is there a button I have to press to get the hacked menu where I can start my switch from the EMUNANDSD?

Note: My SD card still shows up when looking at data management on the normal switch, and I also tried completely turning my switch off and starting it.


Thanks in advance!

Edit: I guess I need to get into RCM mode to get from OFW -> CFW, will update when I do this

 

[thesjaakspoiler]

If you see a rasberry symbol, then you have a PicoFly modchip.
But what is sounds like is that you messed up something on your SD card.
Certain files need to be in specific folders and files/folders can't be set as 'archived' (MacOS messes this up sometimes).
If the Switch can't find those files, you will see that error that you mention.
I would recommend taking the Switch back to whomever installed that modchip or
just follow one of the guides here on installing Atmosphere on your Switch.
Note that the emunand is on a special partition on your SD card.
Format the card and you loose it.

 

[pigy33]

If you see a rasberry symbol, then you have a PicoFly modchip.
But what is sounds like is that you messed up something on your SD card.
Certain files need to be in specific folders and files/folders can't be set as 'archived' (MacOS messes this up sometimes).
If the Switch can't find those files, you will see that error that you mention.
I would recommend taking the Switch back to whomever installed that modchip or
just follow one of the guides here on installing Atmosphere on your Switch.
Note that the emunand is on a special partition on your SD card.
Format the card and you loose it.

I already had the PIcoFly symbol for my PicoFly modchip when I got the Switch OLED modded with the V4 chip and once I got the SD card setup it loaded up into Hekkatate.

Now, even if I don't have the SD card in it loads up like a normal Switch.