Search results

  1. superxoi

    Hardware Ninrendo switch 2011-0301

    This one is not the orange one i shared in the picofly thread. That orange one was nofix,the board has been tampered all places already before i got my hand on for 5$. If your device works before maybe you didn't replace the ic wifi correctly, try once more.
  2. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    From 17.0 + you have to launch the console in syscfw first after doing unbrick (sthetix method). Did you try it? If you have tried it but no result then it definitely hardware related. To check this you can run android to test. If the console can use android mean that your emmc issue , if not...
  3. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    Chips work fine friend. This is the 2nd batch. You have to check cpu pins to see if there is any bridge on your board.
  4. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    If it was joycon logo that meant your emmc is good with full partitions already. You have good cpu and emmc. Change another wifi ic and make sure it a good one.
  5. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    You mean stuck on logo? Is it joycon logo or it show nintendo letter then shutted off. If it was joycon logo, your switch has full partitions on emmc already. Try to replace the wifi ic if it was the case. If it was nintendo letters then shutted off , it meant your console only has boot0,boot1...
  6. superxoi

    Hacking Hardware Regular v2 switch has wifi but no bluetooth

    This is the first time i have met this one. The console has wifi but no bluetooth(the wifi work perfectly). I have met this similar case from oled one but that time it was a bridge the modder made. But now this v2 one has no bridge near the ic. I have changed 2 ic already the problem persist so...
  7. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    I have fixed this case one. The console sometime could boot to hekate and freezed at some point sometime showed crashing image. My case was dram . you have to take a gamble between cpu and dram good luck.
  8. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    Do the console boot without the chip? If not check the 3.3v rail if it is shorted or not. If it is not shorted check the voltage when you plug the power cable in to see if the 3.3v rail give you 3.3v or not. If it is not then check your 3.3v regulator. 1712549766 Maybe you can switch to use...
  9. superxoi

    Hardware Ninrendo switch 2011-0301

    I have fixed a dead board but welcomed with another issue. It's strange because the console can detect wifi but if i use wifi the console issue 2011-0301 and forced me to power off. At first i thought it was ic wifi issue but i was wrong. After changed 3 times in a row and the problem persist i...
  10. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    See if your wifi still work or not.
  11. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    ....
  12. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    Seems like i bought a wrong size connector. I have never used tiny before but look at its picture i can see it relatively smaller. At least it is 8 pins.
  13. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    If your cpu die you can't even see anything in the beginning let alone a error code being shown. 1710204287 It's sd card slot or sd card itself. Just take yhe card out and insert it again if the problem persist then try taking a look at the sd card slot. 1710204445 I don't know your problem in...
  14. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    The long glitching happend to be 100ohm on samsung specificaly, not always but sometime. Skhynix and toshiba glitching time about 6-7s but stable ones and i can use either 47 and 100ohm on these two. After some devices return with long glitching time on samsung emmc i have to use 47ohm again on...
  15. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    I am using ptc plate too. It heats rapidly and conveniently. Can i add 47ohm instead of 100ohm on data0 and cmd. TBH 100ohm causing me trouble with long glitching time(samsung emmc) than 47ohm. I have switched to used 47ohm at default because of the glitching time.
  16. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    Oh! I didn't expect purple looks that good. I'm glad i ordered these two colorous. Do you use hotair gun or hot plate to assembly?
  17. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    It's fun though. I have ordered all the parts from taobao. Including the board from jlcpcb 100 completed units will cost me 140$. Nearly the cost of rp2040 zero on taobao. But i'm happy with it. The sole reason is fun if you ask me.
  18. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    do you assembly it your self or let jlcpcb do it. i intent to do it myself but jlcpcb have some parts with good price (some not). i'm trying to mitigate the cost as less as possible but the parts i have now will cost about 145$ for 100 completed units. 1709618572 the only one i concern about...
  19. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    this part (w25q16jvuxiq) is the most pricey on the list beside the rp2040 itself.
  20. superxoi

    Hacking Hardware Picofly - a HWFLY switch modchip

    wow. i'm off this topic for awhile and you have completed it. amazing job.
General chit-chat
Help Users
  • No one is chatting at the moment.
    Veho @ Veho: Her boob is the cause of all this current shit :angry: