Hardware Optimized capture card No signal

Throwaway162839

Throwaway162839

New Member
OP
Newbie
Level 1
Joined
May 10, 2024
Messages
3
Trophies
0
Age
54
XP
20
Country
United States
Hi, today i have installed an optimized capture card (no ir version). All went well but using the capture software i get a no signal after i had put in the product key. I have tried reinstalling the drivers but to no avail. I have also checked if some of the pins on the pcb had dettached but they havent. Using the spd_chk16.exe i was able to revive data. If anyone can help it would be appreciated, if you need anymore specification please let me know.
 
TheStonedModder

TheStonedModder

Well-Known Member
Member
Level 10
Joined
Dec 25, 2022
Messages
932
Trophies
0
Age
27
XP
1,987
Country
United States
Throwaway162839 said:
Hi, today i have installed an optimized capture card (no ir version). All went well but using the capture software i get a no signal after i had put in the product key. I have tried reinstalling the drivers but to no avail. I have also checked if some of the pins on the pcb had dettached but they havent. Using the spd_chk16.exe i was able to revive data. If anyone can help it would be appreciated, if you need anymore specification please let me know.
Click to expand...
Did you install the drivers before disabling driver signature checks?

The optimize drivers fucking suck and I doubt they ever fixed them since 2015.

I’m sure there is a non nuclear option but whenever I’ve made the mistake of installing the drivers both before disabling signature checks or if I plugged in the capture card prior to installing the drivers properly (signature checks disabled) it would cause windows to never see the capture card until I completely reinstalled the operating system

The optimize kits used some hacky drivers to get it to work, and from my understanding using multiple so I could never find out the exact ones to uninstall.

TLDR try another computer if you have it, and DONT plug the capture card in until you, disable windows driver checks, install the drivers, and do a PC restart first. I guarantee if your soldering is done correctly that doing either this or just reinstalling windows(unless you find a less nuclear option) will fix your issue

I hate hate these capture kits lol
 
Throwaway162839

Throwaway162839

New Member
OP
Newbie
Level 1
Joined
May 10, 2024
Messages
3
Trophies
0
Age
54
XP
20
Country
United States
TheStonedModder said:
Did you install the drivers before disabling driver signature checks?

The optimize drivers fucking suck and I doubt they ever fixed them since 2015.

I’m sure there is a non nuclear option but whenever I’ve made the mistake of installing the drivers both before disabling signature checks or if I plugged in the capture card prior to installing the drivers properly (signature checks disabled) it would cause windows to never see the capture card until I completely reinstalled the operating system

The optimize kits used some hacky drivers to get it to work, and from my understanding using multiple so I could never find out the exact ones to uninstall.

TLDR try another computer if you have it, and DONT plug the capture card in until you, disable windows driver checks, install the drivers, and do a PC restart first. I guarantee if your soldering is done correctly that doing either this or just reinstalling windows(unless you find a less nuclear option) will fix your issue

I hate hate these capture kits lol
Click to expand...
Sorry for late reply, I ended up taking it apart checking it all putting it back together then it worked. Maybe the board was contacting something I have no clue, but it’s working now.
 
  • Like
Reactions: TheStonedModder
R

redboy50

Well-Known Member
Newcomer
Level 3
Joined
Dec 20, 2017
Messages
59
Trophies
0
Age
35
XP
248
Country
United States
im having the same problem, it was working perfectly yesterday, now when i went and plug it back in, it says "no signal from the usb" can you tell me what exactly you did to make it work again? thank you in advance
 
Throwaway162839

Throwaway162839

New Member
OP
Newbie
Level 1
Joined
May 10, 2024
Messages
3
Trophies
0
Age
54
XP
20
Country
United States
redboy50 said:
im having the same problem, it was working perfectly yesterday, now when i went and plug it back in, it says "no signal from the usb" can you tell me what exactly you did to make it work again? thank you in advance
Click to expand...
I’m unsure what caused my issue but usually the no signal after working is caused by pins on the capture card being bent out of place due to not enough material being removed from the case. To fix this reseed the chip on the capture card. If you don’t see any obvious problem with the pins or any other solders and that doesn’t work I’m not too sure.
 

Site & Scene News

Go to forum More news

Popular threads in this forum

I will Make you a 3DS custom theme if you don't know how!

Does anybody have the old Health and Safety Information CIA?

Better n64 emulator?

3DS cheats request?

Homebrew  Modified eshop to use <lets advertise some more!>'s servers?

Homebrew  3d on 3DS for unsupported games

Nazi themes on themeplaza

Translation Project  Monster Hunter Diary: Poka Poka Airou Village DX 3DS [English Translation]

General chit-chat
Help Users
  • Xdqwerty @ Xdqwerty:
    @BigOnYa, i don't have one either
     +1
  • SylverReZ @ SylverReZ:
    @AcuteBulbasaurappears, A cute bulbasaur appears. :D
     +2
  • SylverReZ @ SylverReZ:
    @Psionic Roshambo, The Wii U gamepads are tied to the console's region, so its impossible to find a cheap gamepad that supports your model.
  • SylverReZ @ SylverReZ:
    Unless you modify your system, of course, and remove the region check.
  • Xdqwerty @ Xdqwerty:
    @SylverReZ, im now by episode 8 of lain
  • S @ salazarcosplay:
    @Xdqwerty can we discuss chrono trigger
  • Xdqwerty @ Xdqwerty:
    @salazarcosplay, why not?
  • S @ salazarcosplay:
    @Xdqwerty I like how the game had the middle ages 1000AD, the dark ages 600AD.It was great seeing the post robot apocalypse 2300 like Terminator and enter the matrix. some of mad max and fallout. 2300ad though it could had used more elements instead of just a generic ai uprising. It was a great idea for their judgement day to be 1999 Y2K.

    -great additions if they would have made an expansion or dlc in my opinion would be finding out humans trapped in a matrix -

    a follower having a cyborg character living tissue over metal endoskelleton like terminator, and the synths from fallout
  • S @ salazarcosplay:
    4After Zeal fell it would have been good to see more ancient eras. Perhaps Sumeria based in one area, then Egypt based in another area, Greek based in another area, then roman based in another area before the middle ages.---------

    ----between 1000ad and 1999 is a big gap they should have had the age of revolution like the american and French Revolution

    then the cowboyy era in one area of map and the Industrial revolution/age of enlightmentthen a ww1 and ww2 and a cold war era
  • S @ salazarcosplay:
    they could have added 75,000 bc like assassins creed. zeal was already establish in 12, 000 bc , soething before the kindom rose
  • S @ salazarcosplay:
    @Xdqwerty they could also add age of dscover, colonialism ect
     +1
  • S @ salazarcosplay:
    renaissance
  • Xdqwerty @ Xdqwerty:
    https://www.youtube.com/watch?v=ojsK74zBVYg
  • S @ salazarcosplay:
    @Xdqwerty what did you think
  • S @ salazarcosplay:
    @Xdqwerty I think glenn (the frog) after becomming human had an affair with the queen
  • S @ salazarcosplay:
    so he is the great great great great grandfather of marle @Xdqwerty
  • S @ salazarcosplay:
    they made it like Lancelot from king arthur legends
  • BakerMan @ BakerMan:
    just found out i'm now taller than my dad
  • Xdqwerty @ Xdqwerty:
    @BakerMan, me too
  • Xdqwerty @ Xdqwerty:
    @salazarcosplay, sorry i was busy
  • S @ salazarcosplay:
    @Xdqwerty thats completely fine
     +1
  • Xdqwerty @ Xdqwerty:
    @salazarcosplay,
    the ds version added a secret boss reference to chrono cross
  • S @ salazarcosplay:
    @Xdqwerty did you finish watching naruto shippuden and Boruto
  • Xdqwerty @ Xdqwerty:
    @salazarcosplay, i havent even started lol
  • Xdqwerty @ Xdqwerty:
    anyone here?
    Xdqwerty @ Xdqwerty: anyone here?