I trimmed the shell to reduce pressure on the cartridge.
It was much better after the change.
However, one DSONE started giving PSRAM errors.
Perhaps the crack in the lead ball widened as the pressure was relieved.
So I reballed it with a 0.3 mm lead ball.
It's a 48-BGA, but the pitch between...
Try installing SCFW and using an SDHC micro sd.
You don't even need the software from the supercard.
The flash ID error is from changing to a compatible chip.
Chip commands seem to be the same.
I found it on AliExpress, ordered 2 and they arrived today.
They were probably the last ones in stock.
Unfortunately, they had good PSRAM.:rofl:
The cartridges are pretty thick, so I expect the PSRAM to be under pressure constantly.
It seems to be the cause of cold solder joint.
A lot of the...
https://en.wikipedia.org/wiki/Lens_fungus
If it's inside, it could be a fungus.
Long hyphae are often seen, but there are many different types.
If you look closely and don't see mycelium, it's probably not fungus.
Yes, that's fine.
Sometimes it doesn't work well in-circuit.
In most cases, it's recommended to remove the EEPROM with a hot air station and solder it to the board before using it.
You can also use SOP-8 sockets without soldering.
https://github.com/DS-Homebrew/GodMode9i/blob/master/arm9/source/dumpOperations.cpp
The GM9 will not dump properly because it only contains EEPROM information from commercial cartridges.
You will need to use a programmer like ch341a to dump it.
All you can see are the finely tuned traces and the unmounted pads.
It doesn't look like anything has changed, but all of the change could be under the DS cartridge slot.
I don't know when, but recent devkitpro has become strict about definitions and pointer types.
Many warnings have been changed to errors, so you can build after fixing them.
Currently SCFW doesn't have a database, so finding the savetype is the most time consuming thing.
With a database, like ez-flash and everdrive, it will definitely be faster.
This is a firmware update file that runs on SLOT-1 (DS, DS LITE).
If you don't have a micro SD of 2GB or less, you can use this file to update it.
Testing environment
I tried running it from ysmenu flashcart.
I expect it will probably run on other ds flashcart as well.
It updated properly on a...
@Xdqwerty you are not dumb or stupid, you need to stop saying that, you are very smart, even about alot of things I have no clue about. We all love you here, like a big family.
Only thing drive me crazy is all these new horror games nowadays is its so dark, all time. I can't even play them. I understand they trying to create spooky but be creative a little, not just darkness with pop out scare scenes.