Switch OLED (HWFLY) not starting properly

[ASwitchFan]

I tried every possible way to reboot, hard reset way out there for it and cant get it out of the black screen 😭

 

[afgmods]

it is dat0 fail because you have adaptors inserting method not a permanent soldered,

 

[ASwitchFan]

it is dat0 fail because you have adaptors inserting method not a permanent soldered,

So what can i do...whats the next step

 

[irvingoh999]

So what can i do...whats the next step

Take apart the switch and test the C point (best to test all the points) in diode mode. See if the reading flactuates. If you are getting a reading that flactuates or is grounded or anything that seems sketchy, checking the wiring for that point.

Most likely your dat0 adapter has come loose. Best to reinstall it (or reflow the emmc chip) to ensure a solid connection.

 

[ASwitchFan]

How much u charge me? Lol I had a guy do the install for me. Im clueless when opening stuff

 

[Shae23]

How much u charge me? Lol I had a guy do the install for me. Im clueless when opening stuff

What's your location?

 

[ASwitchFan]

Milwaukee WI

 

[Shae23]

Milwaukee WI

Sent you a pm.

 

[Kalmito]

DAT0 fail or CPU plate pushing too much the modchip flex ribbon cable. Need U make to free... (cut the cpu frame or click out the plate in this corner or replace the flex ribbon cable from CPU capacitors to modchip and make it to free... You will see, if it will be good! 🙂