Hacking Discussion SX Core Mariko list of non-compatible tools

[zal16]

sorry.

yes, it's works. tested myself on my mariko console

 

[burnett1]

Hi, I use NX Nand Manager, but it cant Read the Device ID from my Fortnite Switch. So maybe the Fotnite Switch have a othe Device ID who NX Manager cant work with it. Please can you Update the NX Manager included the Fortnite Switch?

Thanks a lot.

 

[BootyGainzSpecialist]

Hekate works fine on my Mariko Switch?

 

[IronLegacy45]

@burnett1 Does your switch have a serial number greater than XKW5002?

 

[RastaFaka]

@burnett1 I have fortnite bundle switch and serial numder is XKJ1004. NX Nand Manager can't read the Device ID and incognito doesn't work (stuck on Switch logo).

 

[burnett1]

My Firmware Number is:
XKJ100425.....

NX nand Manager can´t read the Device ID too.

 

[Canan]

Hello,

I have a switch v2 (Mariko) with the chip soldered inside, with the SX 3.1.0, and everything is stable and working well on the emuNAND
But I'm on 10.2.0 (sysNAND and emuNAND) so I can't use the latest games and/or updated ones...
How can I update my emuNAND (to keep the sysNAND as clean as possible)? Because I found only ChoidujourNX, which BRICK as explained on the first page (autoRCM enable or not).

Thank you in advance,
Best regards.

 

[Adamos_22]

Hello,

I have a switch v2 (Mariko) with the chip soldered inside, with the SX 3.1.0, and everything is stable and working well on the emuNAND
But I'm on 10.2.0 (sysNAND and emuNAND) so I can't use the latest games and/or updated ones...
How can I update my emuNAND (to keep the sysNAND as clean as possible)? Because I found only ChoidujourNX, which BRICK as explained on the first page (autoRCM enable or not).

Thank you in advance,
Best regards.

have same situation before, use ChoidujourNX with update 11.0.0 (not 11.0.1) i.e from this -, after update everything is fine emunand is 11.0.0 and sysnand was untouch.

 

[Maq47]

have same situation before, use ChoidujourNX with update 11.0.0 (not 11.0.1) i.e from this -snip-, after update everything is fine emunand is 11.0.0 and sysnand was untouch.

Pretty sure your link is against the rules.

 

[Canan]

have same situation before, use ChoidujourNX with update 11.0.0 (not 11.0.1) i.e from this link, after update everything is fine emunand is 11.0.0 and sysnand was untouch.

Hi,

Thank you for your help.

To be sure (correct me if needed), you have:
1. Installed ChoidujourNX on your emuNAND only (to keep clean sysNAND)
2. Copy the "Firmware 11.0.0.zip" from your link (because the 11.0.1 is not supported from SXOS)
3. Launch ChoidujourNX and select this file (unzip or not?) to update it (I guess, you haven't/can't selected "prevent fuse burning" as it is emuNAND?)
4. You don't have lost anything and all works fine
Is it Adamos?

Thank you in advance,
Best regards.


NB : You have to update your Mariko firmware and SXOS version in your signature. ^^

 

[Canan]

Hi,
Perhaps, can someone else answer me? =)
Best regards.

 

[leapingliger]

Hi,
Perhaps, can someone else answer me? =)
Best regards.

Yes the way you explained it are the correct steps.

 

[Canan]

Thank you a lot =)

 

[3DSBricker]

It's been a while since someone posted something here, but I've some problems with my Switch. For example, is it normal that I can't downgrade below the version it came with? Not a fuse issue. It came with 10.2.0 and all versions above it work fine including 10.2.0, but if I install something below that, let's say 10.1.0, it hangs on the Switch logo. My fuses are 11+ (14 fuses burned). There also one more thing: I can't get incognito to work no matter what. It always hangs at the Switch logo (also makes a popping sound when forcing to turn of, as it always does when it's stuck and I shut down)

 

[mattyxarope]

It's been a while since someone posted something here, but I've some problems with my Switch. For example, is it normal that I can't downgrade below the version it came with? Not a fuse issue. It came with 10.2.0 and all versions above it work fine including 10.2.0, but if I install something below that, let's say 10.1.0, it hangs on the Switch logo. My fuses are 11+ (14 fuses burned). There also one more thing: I can't get incognito to work no matter what. It always hangs at the Switch logo (also makes a popping sound when forcing to turn of, as it always does when it's stuck and I shut down)

Why do you want to downgrade? I'm assuming you're talking about downgrading EmuNAND and not SysNAND...

Also: Icognito can brick SX Core and Lite apparently, so I'd stay away from that if you've got those.

 

[3DSBricker]

I gave up on incognito and want to downgrade for compatibility reasons for some apps. Need 9.1.0.

 

[mattyxarope]

I gave up on incognito and want to downgrade for compatibility reasons for some apps. Need 9.1.0.

What apps? I'm not aware of any apps that only work on 9.1.0

 

[3DSBricker]

Well things like devmenu or homebrew.

 

[MolhodeSoja]

Yes, emuiibo and edizon don't work.
Emuiibo module makes some game crash, and edizon and edizon overlay don't work too.
It's just because they don't support SXOS.

Is Edizon a cfw issue or core issue? Like, Edizon and emuiibo have no support to sxos, but I am in atmosphere and it crashes when I start it.

 

[mattyxarope]

Is Edizon a cfw issue or core issue? Like, Edizon and emuiibo have no support to sxos, but I am in atmosphere and it crashes when I start it.

https://github.com/tomvita/EdiZon-SE is working. Not sure about emuiibo. It's a FW issue.