Switch V1 freezing randomly

[Youser]

I recently got my hands on a v1 switch which I’ve hacked.

Been using it since yesterday and the console froze 3 times already. Once while it was in sleep mode, it wouldn’t wake up again.

And then two other times during game play.

Unable to do anything other than force a shutdown. Bit of a pain as I have to inject a payload by connecting the switch to the laptop every time.

Just wondering if this is a problem with the console or this should be expected after hacking the console.

Don’t know the history of the console and this is my first switch so I don’t know too much about them.

 

[Youser]

Anyone have any ideas? Today it froze 2/3mins after boot 3 times in a row.

 

[linuxares]

Do you use Tesla? And Tesla modules?

 

[Youser]

Do you use Tesla? And Tesla modules?

No, I don’t think so. It’s a V1 switch hacked using the rentry guide.

 

[linuxares]

If you press Press L + D-Pad-Down + R-Stick, does it show anything?

 

[Youser]

If you press Press L + D-Pad-Down + R-Stick, does it show anything?

When it’s frozen?

 

[Purple_Shyguy]

This happened to me when my SD card connector was damaged.

Get Hekate custom firmware. Boot it and go into the SD CARD diagnostic section. It will actually detect and tell you if it's in 1-bit mode which can mean a faulty or damaged sd slot.

 

[Youser]

This happened to me when my SD card connector was damaged.

Get Hekate custom firmware. Boot it and go into the SD CARD diagnostic section. It will actually detect and tell you if it's in 1-bit mode which can mean a faulty or damaged sd slot.

Would I have the Hekate CFW already installed if I followed the rentry guide?

 

[Veralyn]

Would I have the Hekate CFW already installed if I followed the rentry guide?

From what i've seenfrom the guide you should. Try to hold VOL- while Rebooting from CFW (or when pushing the payload). It should get you into the hekate menu.

 

[Youser]

This happened to me when my SD card connector was damaged.

Get Hekate custom firmware. Boot it and go into the SD CARD diagnostic section. It will actually detect and tell you if it's in 1-bit mode which can mean a faulty or damaged sd slot.

Is this what you mean?

 

[Purple_Shyguy]

Looks like your SD card is ok. So it's not that at least.

 

[Youser]

Looks like your SD card is ok. So it's not that at least.

SD Card might be ok but how would I know if my card reader is not at fault?

 

[Hayato213]

SD Card might be ok but how would I know if my card reader is not at fault?

Unless it tells you that you are in one bit mode, then that is not yet, does it freeze with no SD card in it? I mean test it to see if no SD card, no CFW cause any problem.

 

[kbmarinha]

my V2 is not hacked and always crashes. (happens at least 1x per month) I have to force restart.

 

[Youser]

Unless it tells you that you are in one bit mode, then that is not yet, does it freeze with no SD card in it? I mean test it to see if no SD card, no CFW cause any problem.

Yes this is what I’m going to test next. Might just be a fault with the switch.

Post automatically merged: Apr 5, 2023

my V2 is not hacked and always crashes. (happens at least 1x per month) I have to force restart.

Mine seems to be once a day. Wouldn’t be too annoying if I had the RCM loader (waiting on delivery). Have to connect it to the laptop every time. Do you have any idea what’s causing it?