Switch Lite Picofly blackscreen

[KarimPolska]

Hi guys.

Not my first switch, I already did a Hwfly oled before. This time tried the Picofly on a Lite, the console does not boot to Hekate...

Video:

 

[Donnie-Burger]

Hi guys.

Not my first switch, I already did a Hwfly oled before. This time tried the Picofly on a Lite, the console does not boot to Hekate...

Video:

Need the 2nd mosfet. Had this issue with 2 mosfets and after replacing with a hwfly flex it worked. So my fet installs were wrong. I'm pretty sure I need a thicker wire due to the 10A draw. Gonna try thicker wires on my next one.

 

[KarimPolska]

Need the 2nd mosfet. Had this issue with 2 mosfets and after replacing with a hwfly flex it worked. So my fet installs were wrong. I'm pretty sure I need a thicker wire due to the 10A draw. Gonna try thicker wires on my next one.

Well, I can now see a discrepency in the Mosfet tutorial pictures. There are two wiring schemes.

0.jpg is how I wired it
Mosfet Edit2 is the tutorial picture I followed.
1679414050593 is how I see most mosfet installs.

Now sure whats going on.

Post automatically merged: Apr 10, 2023

I was able to fix it. The picture under the name "Mosfet Edit2" is wrong and dangerous. It's circulating around many forums.

This is "picture :Success"how the Mosfet should be wired, booted first try with only 1 FET.

 

[detilmalala]

Well, I can now see a discrepency in the Mosfet tutorial pictures. There are two wiring schemes.

0.jpg is how I wired it
Mosfet Edit2 is the tutorial picture I followed.
1679414050593 is how I see most mosfet installs.

Now sure whats going on.

Post automatically merged: Apr 10, 2023

I was able to fix it. The picture under the name "Mosfet Edit2" is wrong and dangerous. It's circulating around many forums.

This is "picture :Success"how the Mosfet should be wired, booted first try with only 1 FET.

first 2 images are grong

 

[jkyoho]

That's why I initially merged DATASHEET topview pinout along the actual solder work as pic3 shown.