Hacking [Need Help] Cleaning up SDCARD (MenuHax + Luma3DS)

[Redirr]

I'll be very happy if you guys can help me.
I setup a O3DS XL friends with Emunand with MENUHAX Boot.

"HE dont wanna let me do A9LH", less now that i bricked a NEW 3DS.

I need help not only about cleaning. But with boot. I Alredy asked it here, but inside luma thread. But couldnt solve my problem :

Spoiler

So my inssue it's : I'm facing failure boot with MENUHAX + LUMA3DS
It's has the alredy know chance to fail with menuhax, but now i'm facing too a chance of failure with Luma3DS.

Using RXtools i never got a failure with rxtools, only with Menu hax.

But know it's sometimes failure with menuhax, sometimes with luma3ds, I explain, it's boots menuhax and after finish boot it's get black screen, sometimes not always.

But now, lets talk about cleaning :

Root my SDCARD :
Some files here it's from a old Rxtools step by step tutorial provide by Yakara.

Spoiler

luma
Nintendo 3DS
boot.3dsx (It's Luma3DS boot.3dsx)
code.bin
firmware.bin
Luma3DS.dat
menuhax_imagedisplay.bin
menuhax_padcfg.bin
ropbinpayload_menuhax_USA12288_old3ds.bin
screenshots_raw.bin
slot0x25KeyX.bin

luma "folder"

Spoiler

arm9-payloads
emunand
h&s_backup
lang
nand
payloads
sys
theme
arm9loaderhax.bin
boot_hb.3dsx
config.bin
ctrbootbot.bin
ctrboottop.bin
firmware.bin
firmware90.bin
lu.dat
Luma3DS.3dsx
no_splash.bin
patched_firmware_sys.bin
splash.bin
yakara.ini
yakarizate.in
ykr

So my main problema it's about chance to failure with Luma3DS. Even we already have a chance to failure to boot menuhax, now i have a chance to boot Luma3DS. It's 2 chance of failure.


I tried to start a clean setup with Luma3DS, it's works and boot emunand, but i'm afraid some of this files a need.

 

[spoonm]

If you're concerned about what files are really needed, I recommend backing up your SD card and going with a clean setup, like you said you tried to do.
Work your way up from there, as you should know what you need and what you don't.

I suppose a list of files I have on my microSD card wouldn't be very helpful, would it?
I can say you don't need CTRBootManager-related files, if all you're using is menuhax and Luma3DS. You're not using A9LH, so delete arm9loaderhax.bin.

 

[Redirr]

If you're concerned about what files are really needed, I recommend backing up your SD card and going with a clean setup, like you said you tried to do.
Work your way up from there, as you should know what you need and what you don't.

So i did a setup from zero, but i'm afraid some this files are important.

For exemple : do i need "firmware.bin" and "code.bin" in root sd card?
Because i need with rxtools. and about "slot0x25KeyX.bin" whats its for?

understand that i downloaded all of this files from a tutorial update from RXtools to Luma3DS.

 

[spoonm]

The firmware.bin file inside the luma folder is NTR's. You can leave it there if you want, but it isn't strictly necessary, no.
I don't know about code.bin, but I'm pretty sure it's not necessary, as I don't see it anywhere in my SD card.
slot0x25KeyX.bin is not needed.