Hardware Left joy con buttons no longer work.

[keanu_yves]

Hi, the left joy con buttons stopped working. D-Pad, minus, ZL, L and share. (The SL and SR no longer worked, flat broken). Only analog stick, rail when connecting (you can still hear the click) and bluetooth with joy con detached works.

Any idea? Has the motherboard shorted out? Any integrated circuits?

 

[impeeza]

Search the so many guides on the net. I didn't understand so we'll to you, but this seems a flex cable break.

Has you open the Joy-Con anytime?

When you connect the Joy-Con in to the rail, some buttons works?

The same buttons works via Bluetooth?

Does the pair button turn off/on the Joy-Con?

 

[The Real Jdbye]

Hi, the left joy con buttons stopped working. D-Pad, minus, ZL, L and share. (The SL and SR no longer worked, flat broken). Only analog stick, rail when connecting (you can still hear the click) and bluetooth with joy con detached works.

Any idea? Has the motherboard shorted out? Any integrated circuits?

Did it take a nasty drop? (broken SL/SR ribbon cable makes me think that's the case)
A drop could've cracked some of the solder joints, you can reflow the whole board with a hot air station but it's easy to accidentally melt plastic connectors.

 

[keanu_yves]

Yes, it was opened for SL and SR flat exchange. And when I finished assembling I noticed this. None of these buttons work attacked or via bluetooth. Only analog stick works (attached and bluetooth).

I don't think it's only the flat, because the d-pad is integrated directly into the motherboard. But I can't imagine a short one, as the analog stick still works.

 

[keanu_yves]

Did it take a nasty drop? (broken SL/SR ribbon cable makes me think that's the case)
A drop could've cracked some of the solder joints, you can reflow the whole board with a hot air station but it's easy to accidentally melt plastic connectors.

It's possible. The console took a fall, but it has a few weeks. I'll see if I can get the hot air sation.

 

[impeeza]

May be you did connect some flex wrong,. Disassemble the Joy-Con and connect only the battery to board then test the Joy-Con via Bluetooth

 

[xonn]

I have repaired a Left joycon recently with the same behaviour (only analog stick worked).
The problem in my case was that the ZL button that was always pressed (internally, something was broken) and it blocked any other button. I discovered it just after unpluging the button.
I hope this helps

 

[keanu_yves]

Nice. I didn't notice that in my joy-con at the time. The only solution in my case was to buy a used board and mount all the components of the old controller on it.