Hacking [Guide] How To Hack Your 360
- Thread starter DinohScene
- Start date
- Views 875,931
- Replies 827
- Likes 66
Is there any advantage to a "never been opened" 360 (other than wear and tear obv.) Specifically, is the process any easier on a console that's never been online/updated.
Depends on your dashboard.
7371 and below is JTAGable.
Every dash is RGHable
Phatties drives can be flashed without to much of a problem.
All drives can be extracted.
7371 and below is JTAGable.
Every dash is RGHable
Phatties drives can be flashed without to much of a problem.
All drives can be extracted.
Cool, thanks. Anyway of knowing what dash might be on an unopened 360? I only ask because I heard a friend of mine is selling one that he never got around to opening. I haven't seen it, so I don't know if it's a phat or slim; I suppose I could ask him and find out. All I know is that it's bundled with a steering wheel. :/
Boot it (without it hooking up to Live) and go to system settings.
Phatty is the first generation 360's (with the removable faceplate and HDD) and the Slim is the 2nd generation.
Phatty is the first generation 360's (with the removable faceplate and HDD) and the Slim is the 2nd generation.
I have a xenon 360 with a dash below 7371 that has been unused for years, can I jtag it. What is the best solution for me apart from DVD flashing. I don't plan on going online.
JTAG it ofcourse ;p
Be sure to yank up your fans to 100% to prevent it from dying.
FSD can do that buy you can also edit the NAND with 360 flash tool
Be sure to yank up your fans to 100% to prevent it from dying.
FSD can do that buy you can also edit the NAND with 360 flash tool
I'm not sure if they still sell them as a kit but you could search for the TX NAND-X JTAG kit.
It comes with a NAND flasher and JTAG wires/diodes.
I hope you can solder a bit tho ;p
JTAG is much easier then RGH tho.
As for software, use JRunner.
It'll guide you through everything ;]
It comes with a NAND flasher and JTAG wires/diodes.
I hope you can solder a bit tho ;p
JTAG is much easier then RGH tho.
As for software, use JRunner.
It'll guide you through everything ;]
Yep I can solder, modded lots of ps2 in its days, been out of the modding scene for some time now, as I now have a family and all, but what to get back onto it. Oh yes what about that Demon stuff form xecuter? Thanks for the help.
Then you shouldn't have a problem soldering it in.
Demon is only interesting if you have a RGH.
Then you can switch between hacked and non hacked.
Demon is only interesting if you have a RGH.
Then you can switch between hacked and non hacked.
Would the Xecuter Nand-X RGH Edition JTAG Kit v3 work. What is the difference between it and the Nand-X JTAG kit v3/JTAG Connection Kit
I don't dare to say it's not the good one.
But you at least need a NAND-X to dump your consoles NAND so you can order it yes.
Judging from the name, they also include the JTAG wires (including the diodes) needed to JTAG it.
The RGH edition has updated code that also allows you to flash Coolrunner/Xillinx based glitchchips used in RGHing.
You only need the NAND-X and the JTAG wires ;p
I'd say order it.
You got the most recent version on the NAND dumper and you'll have the JTAG wires along with it (if you don't then you'll need 2 diodes and some wire which won't cost more then a quid ;p)
But you at least need a NAND-X to dump your consoles NAND so you can order it yes.
Judging from the name, they also include the JTAG wires (including the diodes) needed to JTAG it.
The RGH edition has updated code that also allows you to flash Coolrunner/Xillinx based glitchchips used in RGHing.
You only need the NAND-X and the JTAG wires ;p
I'd say order it.
You got the most recent version on the NAND dumper and you'll have the JTAG wires along with it (if you don't then you'll need 2 diodes and some wire which won't cost more then a quid ;p)
No.
You'll need an unlock switch/Kamikaze template or replacement PCB (with your DVD key obtained via RGH) if you want to play backups.
You can also chose for an Xkey, which reduces things to the possibility of a RGH to obtain the DVD key.
This all depends on your Slims drive.
You'll need an unlock switch/Kamikaze template or replacement PCB (with your DVD key obtained via RGH) if you want to play backups.
You can also chose for an Xkey, which reduces things to the possibility of a RGH to obtain the DVD key.
This all depends on your Slims drive.
Yes, partially.
If you got a new Slim then you'll need to solder in a modchip to obtain the DVD keys.
That modchip is basically the RGH.
If you got a new Slim then you'll need to solder in a modchip to obtain the DVD keys.
That modchip is basically the RGH.
i have my Lite-On 24X iHAS124 in the mail, can i use burner max payload tool or do i have to flash it?
Similar threads
-
tankioo
-
DinohScene
That cat suit twink -
Redthebird
-
-
-
-
-
-
-
-
-
-
-
-
-
@
SylverReZ:
16.0.3 support was added into Atmospheré, so it should be alright, but I'd prefer sticking with a lower firmware version just to be safe. -
-
-
-
-
-
-
-
-
-
-
@
DinohScene:
the answer to everything is to open up a thread, it stays up longer then this chat, allowing more people to see and potentially respond
-
