EverPatcherVS with EVERCADE™ VS Firmware 2.1.1 using EverSD

[EverSD]

EverPatcherVS with EVERCADE™ VS Firmware 2.1.1 using EverSD


Use EverPatcherVS to get more advantage of your console!

Note: EverPatcherVS is not only for EverSD users! Everyone can enjoy the fixes and features of EverPatcherVS!




For more information and downloads visit EverSD.com



Changelog:​

● Updated to Evercade VS FW 2.1.1
● Fixing loading times that Official Firmware 2.1.0 introduced
● Fixing broken games that Official Firmware 2.1.0 introduced
● Ability to use Custom Themes

Note: Please re-sync your MicroSD card with the latest EverLoader (version 2.1.4)

Download:
EverPatcherVS 2.0


​

Patching instructions:

1. Extract and open the Drivers directory and run DriverInstall and click on "Install Driver"
2. Wait until it says "Install driver ok." and click on "OK".
   Note: INSTALL THESE DRIVERS ONLY ONCE! DON'T INSTALL THEM A SECOND TIME!
3. Connect MicroUSB Data Cable in VS and PC
4. Put VS in FlashMode:
   - Hold down the small gray button on the backside of your VS while powering it on.
   - A white light will flash once if it's done correctly.
5. Run zadig-2.7
6. Select Options > List All Devices
7. Select "Rockusb Device" and click on "Replace Driver" (while WinUSB is selected)
8. Wait until it says "The driver was installed successfully." and click on "Close".
9. Run EverPatcherVS and click on PATCH!
10. If it's your first time running, it might give you an error message about rootfs.
    If that happens: Run zadig-2.7 again and this time, slect USB-MSC and click on "Replace Drivers" (while WinUSB is selected) and wait until it's finished
11. Click on PATCH! again inside EverPatcherVS
12. Done!

Note: You don't need to install the drivers again the next time you connect your VS into Flash mode, you can directly patch it using EverPatcherVS!

Join us on our Discord server!
https://discord.io/EverSD


Disclaimer: EverSD is not affiliated in any way with EVERCADE™
EverSD does not support or condone piracy.​

 

[esmith13]

Upgrade time!!! Thanks so much for this!