Homebrew Yo, what the f*** did I just do?

[Weaboo420]

So what's the diagnosis?

 

[jaksy]

I just noticed you created two of the same topic, one's just in a different subforum.

Eh that's kind of frowned upon, but I get that you want to see a different variety of answers to be sure.

 

[PRAGMA]

Yeah at this stage you just bricked your console by powering off when it was dumping. YOu shouldve just let it dump then deleted the NAND.bin from your SD and you would be set.
RIP

 

[Weaboo420]

Yeah at this stage you just bricked your console by powering off when it was dumping. YOu shouldve just let it dump then deleted the NAND.bin from your SD and you would be set.
RIP

So even hardmodding it back in won't do anything?

 

[PRAGMA]

So even hardmodding it back in won't do anything?

Im not 100% sure but I do believe doing that would fix it. A lot of effort to do it doe xD

 

[The Real Jdbye]

So even hardmodding it back in won't do anything?

A hardmod will solve the problem, I assume what you did was pick one of the options in rxTools that inject files to NAND, those are dangerous.

 

[jaksy]

So even hardmodding it back in won't do anything?

You're talking about restoring a proper nand backup, not that one you powered down mid dump during, right?

 

[hacksn5s4]

do not do any thing in rx menu other then what the guide tells you what to do

 

[Weaboo420]

A hardmod will solve the problem, I assume what you did was pick one of the options in rxTools that inject files to NAND, those are dangerous.

Yeah that's correct.

--------------------- MERGED ---------------------------

do not do any thing in rx menu other then what the guide tells you what to do

Thanks for the tip, Captain hindsight

 

[zoogie]

So what's the diagnosis?

Very, very good if you want to do a little soldering. I had no previous experience soldering and I managed to pull it off.

Follow that video I showed you, but notice the instructor speeds up at the most critical moment (the actual wire soldering).
Go to this post by @dark_samus3 and watch that video, it's essential to fill in the gaps.

Equipment (minimal):

• cheap soldering iron, the thinner the tip / lower wattage the better.
• lead/rosin solder wire (thinner is better)
• sd/micro sd adapter
• micro 1.25mm jst here is what I used.

 

[Weaboo420]

Very, very good if you want to do a little soldering. I had no previous experience soldering and I managed to pull it off.

Follow that video I showed you, but notice the instructor speeds up at the most critical moment (the actual wire soldering).
Go to this post by @dark_samus3 and watch that video, it's essential to fill in the gaps.

Equipment (minimal):

• cheap soldering iron, the thinner the tip / lower wattage the better.
• lead/rosin solder wire (thinner is better)
• sd/micro sd adapter
• micro 1.25mm jst here is what I used.

Yo, I think I have a soldering iron somewhere.

 

[Binebina87]

Did you try taking out the battery as @dazindude suggested in this thread (sometimes some replies just go by unnoticed lol)?

 

[jaksy]

Did you try taking out the battery as @dazindude suggested in this thread (sometimes some replies just go by unnoticed lol)?

Don't worry, he's just rudely ignoring the suggestion.
It was definitely noticed as he commented on it in his other thread, but never mentioned if he actually tried it or not.