Xbox 360 moded with cool runner not booting

[Freehero]

Hello,
I need help with my xbox360 its moded with cool runner rev c and it stopped booting , giving center green light on the console and on the cool runner stable red led and flashing green light every 5-10 seconds...any ideas please let me know i will attach the board photo for the wires

 

[DinohScene]

Can you try to boot into XeLL and or have you ever booted into XeLL before?

The coolrunner flashing green means it tries to glitch the console, it's either a wiring issue or NAND issue.

 

[Freehero]

Can you try to boot into XeLL and or have you ever booted into XeLL before?

The coolrunner flashing green means it tries to glitch the console, it's either a wiring issue or NAND issue.

how to boot into xell, please tell me how and i can try that.

 

[DinohScene]

Press eject.

Did you buy it pre-modded or modded it yourself?

 

[Freehero]

Press eject.

Did you buy it pre-modded or modded it yourself?

It was moded and working for around 3 years but recently stopped like this
even when pressing eject nothing coming out on the TV

 

[DinohScene]

Your NAND might be corrupted, do you have a backup of your NAND & CPU key?

 

[Murderous]

how to boot into xell, please tell me how and i can try that.

turn off the console. unplug the power. wait half a minute . turn on with eject.

 

[Ferris1000]

First of all the wiring looks like something could be shorted, make sure that nothing is shorted to a via that it doesn't belong to and also check if anything came loose, there are also 2 wires on the bottom for CPU_RST and POST_OUT

I would redo the solder joint and shorten the exposed wire to an appropriate size so that nothing can short out.

Second of all in which position is the Switch? it should be in the Slim Position because it is a Xbox360 Slim.

 

[Freehero]

First of all the wiring looks like something could be shorted, make sure that nothing is shorted to a via that it doesn't belong to and also check if anything came loose, there are also 2 wires on the bottom for CPU_RST and POST_OUT

I would redo the solder joint and shorten the exposed wire to an appropriate size so that nothing can short out.

Second of all in which position is the Switch? it should be in the Slim Position because it is a Xbox360 S

Post automatically merged: Aug 29, 2024

just checked the wiring all ok and no short, switch on slim position.
when i press eject same thing happens but nothing on screen.
just cleaned it with blower and put heat gun on the board for a small time ....
i tried both hdmi and AV outputs...all same nothing out on screen