WiiFlow freezing games.

Discussion in 'Wii - Backup Loaders' started by Tedd95, Feb 25, 2011.

Feb 25, 2011

WiiFlow freezing games. by Tedd95 at 11:48 PM (8,022 Views / 0 Likes) 16 replies

  1. Tedd95
    OP

    Newcomer Tedd95 Member

    Joined:
    Feb 25, 2011
    Messages:
    16
    Country:
    United States
    So Ive Installed New super Mario bros & Zelda twilight Princess. No piracy. But Ive had wiiflow for a couple days and i was New super mario bros and i went down a tunnel and it froze. and i was playing Zelda and i went through a loading part and it froze. whats going on with it? I got my installing info from here---->http://www.wiiflowiki.com/installing/pre-requisite-s

    I used slot 249. and my wii is running 4.3u. it just seems too freeze on loading points.
     
  2. WiiUBricker

    Member WiiUBricker Insert Custom Title

    Joined:
    Sep 19, 2009
    Messages:
    5,827
    Location:
    Espresso
    Country:
    Argentina
    I absolutly cant recommend wiiflow anymore since the devs seems to have "abandoned" it. Now we have November, December, January and February without a new revision of wiiflow.

    I would say get CFG-Loader or play your games either with sneek, uneek or sorgs uniiloader.
     
  3. Tedd95
    OP

    Newcomer Tedd95 Member

    Joined:
    Feb 25, 2011
    Messages:
    16
    Country:
    United States
    do you think its the loader? is there more success with usb loader gx?
     
  4. WiiUBricker

    Member WiiUBricker Insert Custom Title

    Joined:
    Sep 19, 2009
    Messages:
    5,827
    Location:
    Espresso
    Country:
    Argentina
    If your games were dumped properly then it's most likely the loader. U can also try different cIOS. But then, you dont have cIOS related issues with sneek/uneek/sorgs uniiloader.
     
  5. Tedd95
    OP

    Newcomer Tedd95 Member

    Joined:
    Feb 25, 2011
    Messages:
    16
    Country:
    United States
    yeah there on there correctly. has wiiflow been having this problem alot?
     
  6. Lacius

    Member Lacius GBAtemp Psycho!

    Joined:
    May 11, 2008
    Messages:
    3,912
    Location:
    St. Louis, Missouri
    Country:
    United States
    I have not heard of anyone having freezing issues with WiiFlow. I use Configurable USB Loader for the same reason WiiBricker gave (although the last update was in late December, if I'm not mistaken). It is possible you problem stems from your cIOS files. I highly recommend installing 249dx56 and 250dx57 in order to see if they fix your problem.
     
  7. Tedd95
    OP

    Newcomer Tedd95 Member

    Joined:
    Feb 25, 2011
    Messages:
    16
    Country:
    United States
    yeah its been freezing on my games dude. but okay ill give it a try can you give me the steps to install this?
     
  8. Lacius

    Member Lacius GBAtemp Psycho!

    Joined:
    May 11, 2008
    Messages:
    3,912
    Location:
    St. Louis, Missouri
    Country:
    United States
    Try clicking the link I posted.
     
  9. Tedd95
    OP

    Newcomer Tedd95 Member

    Joined:
    Feb 25, 2011
    Messages:
    16
    Country:
    United States
    yeah i did but like how do install this onto the wii?
     
  10. Lacius

    Member Lacius GBAtemp Psycho!

    Joined:
    May 11, 2008
    Messages:
    3,912
    Location:
    St. Louis, Missouri
    Country:
    United States
     
  11. Tedd95
    OP

    Newcomer Tedd95 Member

    Joined:
    Feb 25, 2011
    Messages:
    16
    Country:
    United States
    okay thanks i didnt know if this was it.
     
  12. Dygerati

    Newcomer Dygerati Newbie

    Joined:
    Aug 15, 2011
    Messages:
    3
    Country:
    United States
    I know this thread is a little old, but I'm having the same issue, and I'm running the same version (4.3u). I just updated to WiiFlow 2.2, and I installed the recommended IOS wads but I'm still having the freezing issues. I've also installed many other IOS's I believe ( new at this). Is there anything I need to do to tell WiiFlow to utilize the ones I just installed?
     
  13. JoostinOnline

    Member JoostinOnline Certified Crash Test Dummy

    Joined:
    Apr 2, 2011
    Messages:
    10,834
    Location:
    The Twilight Zone
    Country:
    United States
    Switch to Cfg like stated in the thread.
     
  14. Dygerati

    Newcomer Dygerati Newbie

    Joined:
    Aug 15, 2011
    Messages:
    3
    Country:
    United States
    I actually just installed it about an hour ago, and it just froze =/
     
  15. brausm08

    Member brausm08 GBAtemp Advanced Fan

    Joined:
    Nov 15, 2009
    Messages:
    721
    Location:
    USA - Midwest
    Country:
    United States
    what cIOS are you running? what release of Wiiflow2.2 are you using...and on what cIOS are you launching? ...maybe a syscheck would help ...see Joostin's sig for that....

    yesterday i downloaded a package containing the d2x installer and the d2x7a5 modules...(from a different site). installing those caused my games to freeze ~30 seconds after loading (in wiiflow; didn't test with any other loaders)...installing a different set of d2x7a5's solved this. could this be your problem? ...where did you get the wads you installed from....?
     
  16. Dygerati

    Newcomer Dygerati Newbie

    Joined:
    Aug 15, 2011
    Messages:
    3
    Country:
    United States
    Looks like I'm using version 2.2 RC1 of Wiiflow, and the CFG Loader that I installed has the the filename Cfg_USB_Loader_70.zip.

    I only downloaded the two recommended cIOS files (249dx56 and 250dx57) using ModMii, and at least CFG Loader seems to be utilizing them to load the games. I've manually tried both 249 and 250 through CFG.

    Other than that, here's the syscheck output:


    sysCheck v2.1.0b12 by Double_A and R2-D2199
    ...runs on IOS58 (rev 6176).

    Region: NTSC-U
    System Menu 4.3U (v513)

    Homebrew Channel 1.0.8 running on IOS58
    Hollywood v0x21
    Console ID: 152320748
    Boot2 v4
    Found 88 titles.
    Found 52 IOS on this console. 6 of them are stub.

    IOS3 (rev 65280): Stub
    IOS4 (rev 65280): Stub
    IOS9 (rev 54321): Trucha Bug
    IOS10 (rev 768): Stub
    IOS11 (rev 54321): Trucha Bug
    IOS12 (rev 526): No Patches
    IOS13 (rev 1032): No Patches
    IOS14 (rev 1032): No Patches
    IOS15 (rev 1032): No Patches
    IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
    IOS17 (rev 1032): No Patches
    IOS20 (rev 54321): Trucha Bug
    IOS21 (rev 1039): No Patches
    IOS22 (rev 1294): No Patches
    IOS28 (rev 1807): No Patches
    IOS30 (rev 54321): Trucha Bug
    IOS31 (rev 3608): No Patches
    IOS33 (rev 3608): No Patches
    IOS34 (rev 3608): No Patches
    IOS35 (rev 3608): No Patches
    IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 5663): No Patches
    IOS38 (rev 4124): No Patches
    IOS40 (rev 3072): Stub
    IOS41 (rev 3607): No Patches
    IOS43 (rev 3607): No Patches
    IOS45 (rev 3607): No Patches
    IOS46 (rev 3607): No Patches
    IOS48 (rev 4124): No Patches
    IOS50 (rev 54321): Trucha Bug
    IOS51 (rev 4864): Stub
    IOS52 (rev 5888): Stub
    IOS53 (rev 5663): No Patches
    IOS55 (rev 5663): No Patches
    IOS56 (rev 5662): No Patches
    IOS57 (rev 5919): No Patches
    IOS58 (rev 6176): USB 2.0
    IOS60 (rev 54321): Trucha Bug
    IOS61 (rev 5662): No Patches
    IOS70 (rev 54321): Trucha Bug
    IOS80 (rev 54321): Trucha Bug
    IOS90 (rev 54321): Trucha Bug
    IOS202[60] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
    IOS222[38] (rev 4, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223[38] (rev 4, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS224[37] (rev 65535, Info: hermes-v5.1): Trucha Bug, NAND Access, USB 2.0
    IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
    IOS247 (rev 65535): Trucha Bug, NAND Access, USB 2.0
    IOS248 (rev 65535): Trucha Bug, NAND Access, USB 2.0
    IOS249[56] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
    IOS250[57] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v6
    MIOS v65535

    Report generated on 2011/08/16.
     
  17. brausm08

    Member brausm08 GBAtemp Advanced Fan

    Joined:
    Nov 15, 2009
    Messages:
    721
    Location:
    USA - Midwest
    Country:
    United States
    ...but what revision of Wiiflow are you using? (ie. r410, r304, r355, etc)...that might be making all the difference. it's been WiiFlow2.2RC1 for past two hundred revisions.... if you're using r411, a 'fixed' version was uploaded yesterday which might apply to your situation.

    also, stable revisions of wiiflow prior to r410 could launch on 222, 223, 224, 249, or 250. do you know what 'flavor' you are using?

    the answer to both questions can be found within wiiflow on the 'credits' page or the 'update' page...i can't remember without turning on the wii, but it's out of reach right now (anyone else, feel free to offer that up if you know)

    the syscheck looks fine; there is a d2x7a5 out there somewhere (i have it, but i can't share the wads)....i know wiiflow devs have said a WF2.2-final is dependent on d2x7....but i don't know if the latest RC's require the d2x7a5 versions....

    EDIT: you can obtain d2x7a5 on the wiiflowiki page....i recommend either installing all the d2x7a5 (slots 245-251), or deleting your 247 and 248... then downloading and using r410 or r411fixed (also on wiiflowiki).... r410+ has an auto IOS selection feature which automatically detects the d2x7 cIOSes and launches games on the appropriate one automatically. to use, there can be no non-d2x7 cIOSes in any slot >100 except 202, 222, 223, 224, 225, 236, and 254. ...this should solve the freezing problems you are having.
     

Share This Page