Okay if you can set to 6x when you get yours i'd recommend it, in 3x mode the mario kart title video had quite heavy lag i change the installation to d2 mode which is 6x and its perfect now
If you've burned the disc slower around 4x, then 6x is recommended. I suggest using good-quality DVD-R media like Verbatim or CMC Magnetics and a good drive.
I changed G but nothing happened and when I run Mario kart Wii (PAL) writed disk black page says an error occurred remove disk...
jumper on the kit is PAL enables
my Wii is PAL
is there any config or something must I apply?
according to older posts I think I must uninstall homebrew channel
Infact my wii menu version is 4.3E
do you think this my be the problem?
Hi everyone
Please guide me region change wii modechip d2e pro
Short soldering is needed lick d2c models for changaing PAL to NTSC ?
Or it work automatically detect disk region?
Hi everyone
Please guide me region change wii modechip d2e pro
Short soldering is needed lick d2c models for changaing PAL to NTSC ?
Or it work automatically detect disk region?
I do not have a diagram for this chip in particular, the archived site on Wayback Machine doesn't have the diagrams on there fortunately. If anybody does have the diagram then they'd be happy to help.
Hi everyone
Please guide me region change wii modechip d2e pro
Short soldering is needed lick d2c models for changaing PAL to NTSC ?
Or it work automatically detect disk region?
Hi everyone I finally success that unbrick my 003 wii with the modchiped drive. randomly my bricked 003 wii been USA region and fortunly modchip key set to usa region I think.
Because I try to boot mario kart wii PAL region on theother wii that has EUROPE wii menu. I write a good same as NTSC version for EUROPE edition. But disk wont run mario kart wii this time. Now I don't have any idea if what's exactly my issue? Bad write or something else like changing modchip solders for set it to pal region.
Modchip is the picture that last post shows
D2epro a9+ its has two jumping point named : OP1 - OP2
Do you think their related to changing region?
Post automatically merged:
Oh yes if we jump op1 EUR region enabled
If both op1 and 2 free USA region enabled
Clearly two theother stat i mean 11 and 01 related to jpn and korean region
So this models isnt fully region free and we must use jumper option
In what could possibly be the worst way to start October for emulation enthusiasts, as of just a few minutes ago the Ryujinx repository appears to be down, with the...
The Legend of Zelda: Echoes of Wisdom has officially leaked online ahead of its 26th September street date.
TLOZ: Echoes of Wisdom marks the first time that a...
It's time to see what surprise PlayStation has in store for the future, with its PS5 Technical Presentation broadcast. Will we see a PS5 Pro? Or will it be something...
The Legend of Zelda: A Link to the Past is a standout game in the Zelda franchise, and one that many hold dear. With a remarkably open design for its time, paired...
Images of what are supposedly a factory prototype for the Nintendo Switch 2 alongside a spec sheet have appeared on a Chinese forum.
The renders show the device from...
Information on the successor to the Nintendo Switch has been hard to come by, as with the launch of a new console, Nintendo is keeping things to themselves for now...
With a Switch 2 reveal hopefully on the horizon, the question is how much will Nintendo ask for the base model at launch and what will their launch offerings be...
Late yesterday, Nintendo and The Pokemon Company filed a lawsuit against Pocketpair, the developer of the monster-collecting open-world game Palworld, alleging it...
When Palworld released into early access back in January of this year, it drew attention for its similarities to Pokemon. Some called into question whether or not the...
The little brother to Nintendo’s flagship hardware, the Switch Lite released in 2019 to positive reviews. With all the power of the full-sized console at a lower...
In what could possibly be the worst way to start October for emulation enthusiasts, as of just a few minutes ago the Ryujinx repository appears to be down, with the...
It's time to see what surprise PlayStation has in store for the future, with its PS5 Technical Presentation broadcast. Will we see a PS5 Pro? Or will it be something...
The Legend of Zelda: Echoes of Wisdom has officially leaked online ahead of its 26th September street date.
TLOZ: Echoes of Wisdom marks the first time that a...
Images of what are supposedly a factory prototype for the Nintendo Switch 2 alongside a spec sheet have appeared on a Chinese forum.
The renders show the device from...
With a Switch 2 reveal hopefully on the horizon, the question is how much will Nintendo ask for the base model at launch and what will their launch offerings be...
Information on the successor to the Nintendo Switch has been hard to come by, as with the launch of a new console, Nintendo is keeping things to themselves for now...
Late yesterday, Nintendo and The Pokemon Company filed a lawsuit against Pocketpair, the developer of the monster-collecting open-world game Palworld, alleging it...
When Palworld released into early access back in January of this year, it drew attention for its similarities to Pokemon. Some called into question whether or not the...
The first teaser for the upcoming Minecraft movie, creatively titled A Minecraft Movie has released.
Starring Jack Black as Steve and an expanded cast that includes...
The little brother to Nintendo’s flagship hardware, the Switch Lite released in 2019 to positive reviews. With all the power of the full-sized console at a lower...
@amadeusrock shutdown the switch, remove the SD card and put all new files from Atmosphere, and Hekate github on it, (like that post linked to) then reboot using jig and TegraGUI, and push the Hekate.bin payload. (You update Atmosphere and Hekate by placing new files on SD card, that's all you do to update Atmos/Hekate)
@
BigOnYa:
@
Kirbydogs:
