weird problem usbloader_cfg with FAT32 HDD

Discussion in 'Wii - Hacking' started by freddyhooge, Sep 5, 2010.

Sep 5, 2010
  1. freddyhooge
    OP

    Newcomer freddyhooge Member

    Joined:
    Sep 2, 2010
    Messages:
    29
    Location:
    @ Home
    Country:
    Netherlands
    I Have a 60gig USB Harddisk Formatted as FAT32.

    Usbloader_cfg installed, and some games.
    Usb loader loads, but then asks to choose a wbfs device.
    It says no FAT32 device found, and that the cfg file is loaded from SD card, evenwhile there is no SD Card present.
    I have tried to split the Harddisk in fat32 en wbfs also, this seems to give the same problem.
    I have tried a 2gig usb stick with same cfg and setting on both ways, and this works.

    Is the Harddsik incompatible?
    I would say not, while usb loader is loading!

    Plz help me out....
     
  2. dronesplitter

    Member dronesplitter GBAtemp Advanced Fan

    Joined:
    Sep 30, 2007
    Messages:
    533
    Country:
    United States
    Make sure your USB HDD is plugged into the correct USB port on the Wii. You want the one that is lower down when the Wii is in the horizontal position.
     
  3. freddyhooge
    OP

    Newcomer freddyhooge Member

    Joined:
    Sep 2, 2010
    Messages:
    29
    Location:
    @ Home
    Country:
    Netherlands
    I have enough experience to know that.
    Like is wrote, usb stick is working, harddisk not.
     
  4. xzxero

    Member xzxero ♥bong milk does good for the brain♥

    Joined:
    Jul 18, 2008
    Messages:
    3,831
    Location:
    SB
    Country:
    United States
    then obviously its not compatible.
     

Share This Page